Reviews
Fits: Others
I bought this as a supplement.
I bought it the summer before last and have had quite a few falls.
Finally, the original round shape was gone, and I decided to buy it again in a Potato-like shape.
As far as I can remember, I fell 7 times on Right and 9 times on Left with SlipDown system, but the Screw hole did not collapse and the vehicle body slid and missed Damage.
I think Slider does a good job including Material.
View detail
Hand guard is not so cool.
I was looking for a different hand guard for my 701SUPERMOTO hand guard because it was too large and not cool enough, and I found this product.
Handlebar inner diameter is 14mm.
All you have to do is remove and replace it, so the process is quick and easy.
I think the Handlebar vibration is suppressed because the Lever Guard tip is shaking when Idling, maybe.
I have no idea how much change there is from the original, since the purpose is to change from the OEM hand guard and not to reduce the vibration of the handlebar.
Refreshing the handlebar area is the most pleasant change.
It is quite solid and seems to protect the handlebar area even if it falls over in the Circuit, although I don't want to experience the effect.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB
Excellent effect!!!!!!!
The vibration at stoplights and vibration after 50km/h have all been eliminated. I asked a motorcycle shop to install it because it seemed difficult to disassemble and reassemble the throttle part. So it is not cheap for the product + labor, but I think it is worth it. View detail
Fits: その他
Currently being used for Lever Guard of another company.
The bar end fixation attached to another company's Universal Lever Guard was too loose, so we diverted this product to fit the handlebar inner diameter.
I appreciated the fact that the Bar End I.D. had an Exactly component.
View detail
Fits: HONDA glom, HONDA MONKEY125
Single cylinder as comfortable as possible.
It was installed to improve the vibration of a single cylinder Handlebar as much as possible.
Since I have a Bar end mirror, I didn't think Weight would be attached, so I decided to use this Parts.
It is co-tightened with DAYTONA's Hi-Sider & Adapter and is Large sturdy.
View detail
Fits: HONDA glom, HONDA MONKEY125
Comfortable over 70 km
Knuckle guard for wind protection for winterQuantity:The Knuckle guard windshield is just for comfort. Overall, I am satisfied with the product, but I think the price is a bit high. View detail
Fits: その他
Handlebarfor Replacement
I purchased this product to change the handlebar diameter when replacing a MORIWAKI handlebar with a ZETA handlebar. This product is a recommendation because there are many different types of Adapters to fit any handlebar diameter, so you can easily change the handlebar. View detail
It was easy to install.
690smcr (21 years) attached to the
The work was very easy and the Instruction Manual was included in case of any problems.
In the case of the 690, the OEM Knuckle guard is attached, so if you remove it, the clutch lever will also come off, so if you have a separate m6 nut, you can fix it.
Vibration absorption effect, but there is no overt reduction in vibration.
I was wondering if it was less than before it was installed.
I was more satisfied with the visual coolness of the product.
View detail
Fits: HONDA glom, HONDA MONKEY125
Appearance Up
Vibrations are much less than before installation.
It is also a dress-up, so it is a recommendation.
View detail
Lever Guard Installation
At first? but after reading the instruction manual for 5 minutes, I could understand it.
Holding a constant RPM on the highway is quite numbing if the RPM is subtle.
This does not eliminate it, but it will be much better.
Grip should also be replaced.
But if it's a 16 year transition, you have to change the Lever or it will interfere.
View detail
Looking forward to Lever Guard and vibration reduction!
I purchased this for Handlebar vibration reduction and lever protection.
At first it was difficult to tell which product could be installed.
I was confused, but in the case of Grom, the OEMHandlebar
Lever Guard is a special type of bolt that is inserted into the handlebar.
If you are using a different handlebar, you need to select and purchase a locking spacer of the correct size for the inner diameter of the handlebar. You can choose the thickness and shape of the lever guard except for exclusive products.
I purchased the 8mm thick one. Installation was easy.
The instruction manual was also good and easy to understand.
If there is interference, there is a Spacer made by the company that can be used.
Adjustments.
View detail
Fits: HONDA glom, HONDA MONKEY125
Vibration reduction
After installing these parts, the vibration was reduced to the extent that I felt that I had been straining my body to suppress the vibration. View detail
Texture and fixation are both fine.
We had been using ZETA's ArmourGuard, but it has been losing its fixation force with each fall due to an increase in the number of fall scars.
We have not tipped it yet, but it is highly rated by surrounding Riders, and although it is Custom against weight reduction, it seems to increase the possibility of protecting the area around the Lever and Reserver tanks.
Also, the vibration absorption, which was the original concept, seems to have been effective, and I feel that numbness and fatigue in my hands have been reduced.
It is difficult to judge whether my physical strength has improved in this area.
Also, as long as the inner diameter of the handlebar is checked carefully, installation can proceed smoothly and without problems.
It is a very Simple product, but I think it is very effective.
View detail
Fits: HONDA glom, HONDA MONKEY125
Very good product!
I had been suffering from the vibration of the handlebar, which is peculiar to Groms, during city driving and touring, but this product has made me comfortable. It is a very good product. View detail
Fits: HONDA MONKEY125, HONDA GROM, HONDA GROM
My payment includes FedEx cost, FedEx charge me twice
My payment includes FedEx transport to Poland. Now FedEx charge me twice. The handle bar guard is lossen even the screw is very tight, it's slippery on smooth surface of handlebar end View detail
Fits: Others
I appreciate the ability to reuse it.
Used in CT125CT110 HUNTER CUB.
Purchased a Vibration Absorption Lever Guard to install on my CT110 HUNTER CUB, which was used on my 690 DUKE before the switch.
When I pulled out the long, thin washer attached to the Adapter, it entered the Handlebar.
It would be nice to be able to use another type of car in this way.
View detail
More than I imagined!
I bought it because I didn't want to put on quite a bit of vibration + heavy weight due to the single cylinder.
There are many Lever Guard products available from various companies, but we chose OUTEX because Vibration absorption The other reason is that you can install any Bar End you like as long as it is M8-compatible.
There are very few Lever Guard that can put Bar End on other companies… I use Posh's Middle weight (Mud black) in conjunction with the
My impression from using it is that it reduces vibration more than I expected. But of course, it is not Zero.
The performance is unquestionable. But! As others have said, the bolt included is iron, which is not good.
View detail
Look good, feel great!
Put these, with the hand protectors, on Tuono V4. They really suit the bike and make a huge difference to the vibes through the bar! Didn't use the expansion inserts, instead used a longer M6 bolt, an M6-M8 sleeve, and a spring washer so I could fit it directly to the existing Tuono bar insert and keep the bar end weight too View detail
Lever Guard Bar End
I was fed up with the numbness and tightness of the STD Handlebar, so I replaced the Handlebar and decided to replace the Bar End because the inner diameter was different from the OEM. I bought it.
The inner diameter was slightly reduced and the outer circumference was reduced by 1mm or more.
I heard that the OEM Lever was a winner and I also purchased the Short lever.
Well, the key is vibration proofing, but I haven't tried Touring yet because of winter, but I ran about 60 weeks on the nearby Thousand Meter ShortCourse.
I want you to know that I want you to be able to do the same thing. (・∀・)
It is not Racer, enJOY, but is the vibration of the hand about normal NAKED?
It was no problem at all.
I'm looking forward to spring, which I think will make cruising at high speeds easier.
View detail
Fits: HONDA glom, HONDA MONKEY125
It works!
The Handlebar Guard I had been using is no longer available due to the replacement of the lever, so I installed this.
We had previously installed Posh's Heavy Weight Bar End and AELLA's anti-vibration ring.
I felt that both of them were definitely effective, but due to the increase in width of the car, I took it back and replaced it with this one.
Honestly, I thought it would be … effective, but it's no better than the above two! (= personal opinion)
This product is doubly great because it narrows the width of the car and adds Guard.
View detail