Reviews
It's pretty solid
It is used in SRX400 I wanted to make it a high slot because I felt like I had to re-grip it and turn it
At first I thought I could get away with it if I bought only the inner pipe and processed it a bit, but it was more than I thought The NORMAL is the only one with a Switch and a Throttle holder Because it is an integrated model, the Switch was appropriated from FZ-1
Some effort is needed to fix the wire It was actually quite solid, although it felt like it was I apologize for underestimating the installation
There is no installation instruction manual and my sons cannot install it Maybe not Well, I guess it's not supposed to be built by amateurs, and people who ride Motorcycles have a certain amount of Or maybe it's just that I've got the experience and knowledge, but..
I don't think it's a loss to buy it because you can easily change the retraction dimensions by replacing the inner pipe
SRX is a NORMAL machine with 38 diameters and 42 diameters this time it may be severe, but it doesn't seem to be a problem with the Single 400 I'd rather go with the 44th
View detail
If you're looking for texture, you're in luck
I used it for TW200
Handlebar is 22.2φ but it's a souvenir I bought at BALI
The accuracy is a bit more subtle
The texture is very nice.
Normally, the plastic Throttle would be in the Gold genus or something like that
I don't want to be a little cheesy! This may be good for people who are
I've combined it with the same Cable from GOODS and the NIBBI carburetor
The insertion point of the wire is a little stiff and not fully inserted
I put the Engine on and the Wire was hanging up a bit
The wire insertion point is cut out and the wire is inserted into the throttle first
It was easy to install
Maybe it's because the paint on the Handlebar was a bit of a Sugar Crystal finish
Does it feel a little heavy when you twist it, like aluminum or stainless steel? The smooth one
I think it's a good idea to use the Resistance Small measure
I think it fits the STREET type of Custom
The round, smooth design is also a nice touch
I wanted to use NIBBIOEM because it was TRACKER flavored
I didn't see it on LineUp
We were happy enough here as well
View detail
The price is reasonable, but the installation effect is satisfactory
There is no instruction manual and it may take some time to install You can do this Level if you look up the point in advance on the Net
In my case, I didn't have Parts cleaner to remove the Grip, so it took a lot of time and I did
Also, the size seemed to be a little different from the OEM and it didn't fit perfectly
I couldn't adjust the Grip part alone, so I finally finished adjusting the ThrottlePulley part
After the exchange, the need to regrip the Accelerator grip during the acceleration phase was reduced by about a third I'm glad I replaced it
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUBC125
While changing the Grip
I bought it while I was installing the Grip heater
It can be fitted with external grips with no problem of accuracy
High Solo is nice too, because it's less open than the OEM
Recommended for people whose wrists get sore when fully opened in OEM
The price is cheap and large, and I'm satisfied
View detail
Fits: HARLEY-DAVIDSON Softail Deluxe EFI FLSTNI, HARLEY-DAVIDSON Screamin' Eagle Softail Springer FXSTSSE2, HARLEY-DAVIDSON 883 Custom XLC, HARLEY-DAVIDSON Screamin' Eagle Road King FLHRSE3, HARLEY-DAVIDSON 1200 Roadster XLCX, HARLEY-DAVIDSON 883 Low EFI XLL, HARLEY-DAVIDSON FXR 2, HARLEY-DAVIDSON Switchback FLD, HARLEY-DAVIDSON Electra Glide Police FLHTPI, HARLEY-DAVIDSON Sportster 1100 XLH, HARLEY-DAVIDSON 883 EFI XL, HARLEY-DAVIDSON Softail Slim FLS, HARLEY-DAVIDSON Softail Springer FXSTS, HARLEY-DAVIDSON Sportster 1200 XLH, HARLEY-DAVIDSON Electra Glide Classic EFI FLHTCI, HARLEY-DAVIDSON Forty-Eight Special XLXS, HARLEY-DAVIDSON 15th Anniversary Fat Boy FLSTF, HARLEY-DAVIDSON Softail Heritage FLST, HARLEY-DAVIDSON Softail Rocker FXCW, HARLEY-DAVIDSON Softail Deluxe FLSTN
Drag Specialties DUAL THROTTLE SLEEVE BLK
It's one of the things I need for my motorcycle. I needed some time in shipping, but I'm fully satisfied.Thank you for your attention in securing the inventory. I will continue to use it as a leaf. View detail
Throttle Tube
This throttle tube should have come stock from Honda. It's the perfect upgrade to this small bore bike. Makes riding and banging through gears so much easier. Good upgrade and at a very low price. Installation was easy. View detail
Large strange good
Cheap and easy to install, High Solo status is almost & hellip; Limit The Pipe itself is a little bit small, but you can get more satisfaction than the price indicates that one can 。 View detail
Good Items
perfect fit on my honda Grom Sf it is easy to install and it reduce the gas rotation...very nice...buy a new set of rubber handle when u install it.. View detail
Compared to OEM, construction is chatty but it is convincing
It is chatty compared to OEM, but it is convincing if you consider the price. The effect can be experienced, it is attached to the CB 125 R, but with the High Solo effect Axel opening and sense of acceleration of feeling etc. etc. I think I got it wrong. View detail
very good value for money.
nice product for a very good price. if you want your msx to have better throttle response combined with less movement of the wrist,this is a good product. shipping was very fast with economy mail(10 days between order and delivery) happywith the purchase. View detail
To CB 125 R.
Used to exchange from OEM to RossiGrip.
I was able to install it without problems.
Because I liked both durability and operability by using it for about 2 years at the time of the front car Grom.
It was good to divert it. (This time it used a new one)
View detail
It's cheap but ....
Grip I bought it for exchange.
Replacement is necessary to loosen adjustment of Throttle valve side of Throttle Wire, so Right Side's Cowl needs to be attached / detached.
This product has shorter Pipe length than OEM.
With the grip I gave, the outside touched Handlebar and Throttle got hard to return.
I am dangerous and I hope improvement!
I put a thin Film in between Handlebar and Grip to deceive it.
View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
Because it is cheap, will it make a reasonable price?
When installing, I will tighten with Bolt & Nut, but there is too much play in the hole part where Nut is fixed and it got round and round and round and tightened.
I think that there is an error with manufacturing fixed because it is only one side problem but my feeling is Ha Gap?.
It was disappointing only to the Manufacturer whose name is known although it could be installed without gaps with Gold clusters in the gap.
The whole making is made of resin and it is a reasonable price. I hope that durability is good after that.
View detail
I was saved even when I told myself!
I usually wanted to make it to High Solo, but I was saved a lot by different things!
Maintenance was done before departure, but Throttle Wire expired due to deterioration at Touring destination, I caught my head if I could not go home ...
Throttle Wire inventory confirmation was contacted to the nearest Motorcycle supplies store, but OEM will be ordered.
However, because it was Active High Solo, Throttle Wire inventory was put in every store, so I could repair and went home safely!
Besides the High Solo effect, in the emergency there was also Universal property, I was deeply aware that it was good at Manufacturer which is placed in the shop.
View detail
It is not usable
I attached it to the 2016 model CYGNUS X that was in the corresponding model but the diameter of Throttle is too small and Axel 1 / About 4 will play. Once, I adjusted the play of Accelerator Wire but it is out of adjustment range. View detail
KITACO Super Throttle Pipe
The short-stroke gas knob of the kitaco perfectly fitted the Honda Lead af48, the stroke of the handle became shorter, the acceleration control became more convenient! View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
Precision is not right now
Buy HondaOEMSports GripHeater to FIMONKEY, purchase, Throttle pipe caught
Throttle pipe Since the catch remains even if it is scraped, if you check the Holder, the level difference between the top and bottom in the assembled state is 0. There was about 5 mm and somehow I got caught shaving it..
Also, since Starter switch is not needed, there is no Spec. It was better to have MODEL made cheaper by that much.
I thought about turning the Plate of the contact and turning it in the opposite direction to make it a Kill switch but if the contact worn out the Engine stopped and it stopped because it was dangerous.
(There is a possibility that the contact wears due to vibration of traveling to cause poor conduction)
Those who do Kill switch think that it is better to note that side.
View detail
To prevent fatigue of the wrist
Focusing on fuel economy Low to medium Torque is only a thick engine, so to surrender to cruising speed unexpectedly it is necessary to have a pretty Axel opening, let's convert it to High Solo.
Cover of Throttle department is Quantity : It's just stopping at 2 pc Screw, so you can easily remove it.
After loosening the main line, just remove the Wire on the Lever side and reattach it to the replacement item. Easy!
View detail
Purchase for the purpose of eliminating play of Axel
PCX (JF56) It attached to. It is cheap and it is Large satisfied with the aimed item.
There will be individual differences, but starting to ride PCX, Big Li to the extent of Axel's play!
Grip Even if you pull the Adjuster of Nemoto fully, the play still remains Large. Remove Helmet in,
Even checking Throttle side, Adjuster does not seem to exist - -.
So, attaching this High Solo, we thought that play would be of little concern and bought it.
The result is more than predicted, the position to multiply by Wire is also different, Adjuster is more Adjuster the more the adjustment range of play
Spread! And I think that the degree of High Solo is enough. Torsion of the wrist to the full throttle became a little easier.
Moreover, I do not mind the weight of Throttle because it is 15%. Previously, I put 30% on another Motorcycle
There was a thing, but it became heavy anyway, grip strength did not continue at Touring, I saw hell.
15% of this product is open degree - As for weight, I think that it is quite exquisite for PCX.
The price is also very cheap and easy to install, so if you are interested, feel free to think it's worth it.
View detail
It's neither good nor bad
The price is cheap
I wonder if it became a little high Solo ...
It is about
I want to convert it a little more High Solo
Grip has attached the Other Company Product
Installation is easy, PCX 150 Grip end
It is extremely tight.
I think that there is electric impulse
View detail