Reviews
Stable TANAX NapoleonOnMirror.
Stable TANAX NapoleonOnMirror.
A gem that is both visually appealing and easy to see.
However, the paint will surely peel off if you do not wrap the curing tape for installation.
View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XV400U, YAMAHA YJ50SP, YAMAHA XV1100, YAMAHA SRV250, YAMAHA V-MAX1200, YAMAHA SRV250S
Large and easy to read Mirror!
[How is it used?
KIJIMA's Mirror was not practical and was replaced in tears.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It is only a replacement for the NORMAL. It can be installed without any problem at all.
And since it is for Yamaha, no Adapter is needed.
How was your experience with it?
It is large, not blurred, and very easy to see.
[Included Parts:were they on?
There was nothing in particular
[Was there anything that disappointed you?
It is a little too large to be stylish, but I would give it a high score.
▼Mirror is Large but this Mirror is easier to see than Normal and is a good recommendation with good parenthesis!
View detail
Vibration made it shaky and unusable.
[How is it used?
I replaced it with Small Mirror because I wanted to make it Stylish.
Was the one you received as per Image?
The Mirror was smaller than the Image.
Was the installation difficult?
It was easy to do as I only had to replace it with NORMAL.
How was your experience with it?
Perhaps because of its slenderness, the vibration caused severe blurring, making the situation unbearable to watch.
Not practical.
[Included Parts:were they on?
There was nothing in particular
Yamaha cars must be fitted with Adapter.
[Was there anything that disappointed you?
It was too small to see and too dangerous because of the vibration.
Since ▼Scooter has this blurriness, I think this Level is enough to be known during testing at the time of product development. This is a Level that we would like to see the company make sure of.
View detail
Nice yellow color and good condition. Fast delivery. Bosozoku style. Fit to honda dio ,scooter, moped. 8mm screw diameter. View detail
Fits: BMW R100, BMW R80, BMW R90Series, BMW S1000RR, DUCATI 1098, DUCATI 1198, DUCATI 1198, DUCATI 1299 Panigale S, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO, DUCATI 851STRADA, DUCATI 888 STRADA, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999
I bought it to put on my MATE 80, but it didn't stick.
I bought it to put on my MATE 80, but it didn't stick. View detail
![[Highsider] RODMirror MONTANA](https://img.webike-cdn.net/catalogue/images/49334/98581_TS.jpg)
Replaced with xsr700 OEMMirror.
Compared to the horizontal Mirror of the OEM Product, the Round Type Mirror is naturally harder to see.
As for the texture, I think it is good with a Gold feel.
I think it looks great on the xsr.
View detail
Small measures are blurred and difficult to see.
[How is it used?
Purchased to change to Classic style Mirror.
Was the one you received as per Image?
No, it was cheesier than I expected.
Was the installation difficult?
Since it is a replacement for NORMAL, it is easy with Bolt On!
How was your experience with it?
When running, vibration causes blurring, and Mirror is smaller than expected and difficult to see.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
Large is Small
Vibration makes it blurred and hard to see.
View detail
I think it is so-so.
I installed it on a BirdCity155, which requires a conversion bolt because the Right Mirror on the Yamaha has an Opposite Thread Screw, but it still fits a little lower than the Normal. The included Bracket Extension Bolt is not necessary for BirdCity. The Mirror in Blue will reduce the reflection of the light from the following vehicle. "Made in Germany The Mirror and the construction of the Mirror are very solid and solid. The difference between Mirror and Normal, which is too tacky and vulnerable to vibrations, is vast.
However, this Mirror itself is also movable to some extent for adjustment. "Hardness There are individual differences in
Quantity:Pair (for Left and Right) To Quantity:I bought 2 pcs. 1 pc is too hard and doesn't work at all, the other one works with some force ….
It's not too loose, it's not something I touch often, and I can't tell what it looks like, so it's not a problem, but I feel like I'm missing something.
View detail
I think that it is a good product
I installed it on a short cylinder GB250 CLUBMAN.
The vibration of the short-cylinder is not so much affected and you can check what's going on behind you.
The design is a good match with the Classic type Motorcycle.
View detail
Satisfied
I wanted a Z2Type Mirror, and at first I bought a cheap Mirror, but the vibration did not help at all.
I tried various vibration countermeasures, but they did not cure the problem. I saw that this product had a good reputation on the Net, so I bought it on the spur of the moment.
It comes in Short and Long, so I put both on, but the Short had less vibration, so now I put the Short on.
Rear visibility is excellent, vibration is gone, and now I can go touring with peace of mind.
Bought a good product.
View detail
I can see why it's been a perennial favorite!
[How is it used?
The NORMAL Mirror was not reliable, so I replaced it.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is an easy replacement for NORMAL!
How was your experience with it?
It is good, easy to see and easy to adjust.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No!
▼This is the Mirror that everyone is familiar with and has loved for decades.
It can be attached to anything by engaging the Conversion Adapter. For Yamaha, the Opposite Thread ScrewAdapter is required.
As for the Design, I know there are different tastes, but I think it is a Design that my uncle will miss.
View detail
Visibility is poor.
The design and texture were good, but the Mirror itself was blurred and difficult to see. It was also hard to see the distance, so I returned it to OEM. It's a shame. View detail
Fits: HONDA CB1300ST, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300ST, HONDA CB400SB HYPER VTEC, HONDA CB400SB HYPER VTEC revo, HONDA CB400SB HYPER VTEC SPEC2, HONDA CB400SB HYPER VTEC SPEC3, HONDA CBF1000, HONDA CBF600, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR150R, HONDA CBR250R, HONDA CBR250R, HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA CBR600RR, HONDA CBR600RR
Mounted on cb400sb
Purple Mirror is a good Accent.
Installation is easy with a Hexagonal Wrench.
As rumored, there is blurring at just under 100 km, but not so much that you can't see it, so it doesn't bother me.
I am satisfied
View detail
Fits: SUZUKI DR-Z400, SUZUKI ST250, YAMAHA YB125, YAMAHA VOX, YAMAHA TW225, YAMAHA TW200, HONDA Smart Dio, HONDA CB1100, HONDA CB900, HONDA NC700X, HONDA XR250, HONDA CRM250, KAWASAKI ZRX400, SUZUKI ADDRESSV125 , SUZUKI ADDRESSV125 , SUZUKI ADDRESS110, SUZUKI ADDRESSV100 , SUZUKI LETS5 , HONDA X11, HONDA JOKER50
Don't buy it.
I can't say how I feel about it because it was damaged before I used it or installed it. View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XV400U, YAMAHA YJ50SP, YAMAHA XV1100, YAMAHA SRV250, YAMAHA V-MAX1200, YAMAHA SRV250S
YamahaY's Gear Rearview Mirror Evaluation
I purchased this to replace the Rearview Mirror on my vmax 1200.
As expected of a Y's Gear Yamaha product, Mirror's visibility and texture are unmatched by other products.
The Mirror replacement and installation process was easy, even for an amateur.
The Mirror attached to the used Vmax of a low model year was Other Brand Product Mirror, but the newly purchased YamahaY's Gear product has changed the Mirror to Quantity Mirror.:Pair (for Left and Right) Both Yamaha OEM Mirror models provide good visibility and a pleasant touring experience.
View detail
So so
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Moderately
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
cool!
Very nice, but it is sold as a single unit. View detail
wobbly
It is wobbly when driving. I'm wondering if it's sturdy enough to run at high speed Large, I'll strengthen it using the method I saw on YouTube. View detail
KOSO Koso SPRINTStyleMirror
This is a replacement for the OEM Mirror. Installation is simply as per the Instruction Manual.
Separate Washer is required for installation on MT-09.:Pair (for Left and Right) The Mirror looks a little darker than I am used to, but it is not glaringly bright in the summer sun. This is my impression on the first day of installation, so I am looking forward to seeing how it will be used in the future.
View detail