Reviews
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
High quality!
I was looking for a Round Type with the same Image as the OEM and found this product.
The Mirror is a small size, but visibility was not a problem.
The mirror is too small to be inspected.
View detail
The shape and reflection are fine, but ...
This is a comparison with AZMirror made by Tanax.
The first TANA-X AZMirror I installed was too small, and the second was too small.
I replaced them because they became difficult to see due to vibration while driving at high speeds.
It looks just like the Image and was not difficult to install,
After installing the lens, I tried riding it and found that the reflection was at the ideal large size,
It is less sensitive to vibration than AZMirror and easier to see.
Unfortunately, there is no Rubber between the Mirror section and the Body,
AZMirror was better in detail where Mirror's cut surfaces were visible.
Except for that part, Hi-Viz Mirror is better in terms of performance,
I am satisfied because this is a safer way to drive while driving.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
OK
Quantity:I didn't have high expectations because of the price for 2pcs, but the Mirror's image quality is much better than the very cheap Mirror made in China. [Color] Clear
The Mirror part is blurred on the cheap ones, but this one looks as good as the expensive ones like Magical racing, even though it is cheap. The screws are also available in all sizes, including Opposite Thread Screws, so there is a wide range of motorcycle models to be installed. The screws are sturdy and well packaged in a neat box. Even if it breaks down, I will buy it again because it's inexpensive.
View detail
Replacement from OEMMirror
EliminatorOEMMirror was replaced because it was not flattering.
The mirror area is also good and reduces the reflection of LED light.
View detail
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Should have bought this first.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Great for people who just need it on.
It is a standard product in the Off-road area!
Tipping over is a common occurrence on forest roads and courses.
If the Mirror is attached to a bracket that also serves as a lever holder, the lever angle will change when the Mirror falls over, and the lever holder will be damaged.
This product can reduce those risks.
And by far the lightest.
As for Demerit, it is hard to check the original function as Mirror = backward
Because the legs are short and have little overhang, and the adjustment range is narrow.
I think it's best to discount the assumption of direct visual inspection in this regard.
I'm just lucky if I can see it.
I'm completely divided in that way, and I basically only drive on forest roads (load transfer and neighborhood forest roads, so there are only a few travel sections). Mirror attached. I bought it just for that!
Quantity:Pair (for Left and Right) There is a distinction between the two, but each can be mounted on either the top or bottom of the Handlebar.
Many people seem to put it on the bottom side, but I put it on the top side.
When I cut the Handlebar, I thought it might hit my Knee, and I also thought that the top one would be more natural for some reason.
Bracket is a split bracket, so it can be installed without removing anything else.
It's super easy with just one Driver!
The price is so cheap that I don't think I'll care if it breaks, but I hear it's hard to break.
Watch." I think this is the one for those who want to focus on factors other than
View detail
Stage 6 Mirror
Fast delivery within a week. Quality and appearance looks great. Easy installation. The only downside are is a zoom-in lens. With quite small lens. Zoom-in lens can be quite hard to look at. Hope you will consider the change to normal lens View detail
Fits: HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Monkey (MONKEY), HONDA Dio ZX (DIO), HONDA Dio SR (DIO), HONDA Dio SR (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Dio (DIO), HONDA Ape(100)(APE), HONDA Ape(100) (APE), HONDA Ape SPECIAL (APESPECIAL Knife), HONDA Ape Deluxe(100) (APEDELUXE), HONDA Ape Deluxe(APEDELUXE) (50), HONDA Ape (50)(APE), HONDA Ape (APE)(50), HONDA Ape Deluxe (50) (APEDELUXE), SUZUKI Lets4G (LETS Forge)
Normal Mirror for mopeds.
ThirdMotorcycle's Today Mirror snapped off and I had to replace it. Very easy to read! Reasonably priced! … Too bad the Week Point is a little cheaply made…. "luxury" This is not for those who are looking for the best Mirror for their feet, but it is the best Mirror to wear on a foot scooter! View detail
Very good mirror
I acquired this Mirror quickly because the OEM one I had purchased with the CUB 50endless limited edition car had been replaced with a different narrow handlebar and ugly squares. Although it looks beautiful and has an off-road vibe, it is regrettable that it is so easy to move around by vibration and to see if there is a mirror outside in a better location. Ultimately, after obtaining the OEM mirror, it has been removed and is currently stored in the garage as a spare item. View detail
Good vibes
It is a little difficult to adjust the movement, but I am satisfied. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA CBR1000RR, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA CBR600F, BMW R1100R, BMW R1100RS, BMW R1100GS, SUZUKI GS1200SS, SUZUKI RG500γ (Gamma), YAMAHA FZ1FAZER, YAMAHA TRX850, YAMAHA FZR1000, YAMAHA YZF750, YAMAHA TXR250 95-99, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, Others , SUZUKI RG400, KAWASAKI ZX-12R
Excellent quality.
I installed it on my gsxr750rjk. I am happy with the lightness, design, ease of viewing and adjusting everything. The price is high! View detail
Review
Fast shipping to singapore. Came with bolts and nuts to fit different fittings. Anti-Glare. Only downside is that the image is zoomed in. Would be nice if it's not so judgement could be better. Overall nice product! View detail
I think it is neat and stylish.
The snail-like OEM mirror on the cowl of the CB400SB was not very nice and I didn't like it, so I replaced it with a handle mirror.
After much thought and consideration, I finally settled on DAYTONA's Quantity:2pc. I narrowed it down to Mirror, which costs just over 4,000 yen for the set, or Tanax Shark mirror5. Price-wise, it was DAYTONA.
I am sorry, but Webike was not able to get the price, so I bought it elsewhere at a much cheaper price.
I was worried about whether replacing it with a Handle mirror would contact the Cowl since it is a SUPER BOLDOR, but since no one has mentioned it in the Reviews so far, I don't know and decided to take the initiative and give it a try.
As a result, it was impossible. but with an Adapter, it was Large sturdy. Expensive MirrorQuantity:2pc. Set、AdapterQuantity:2pc. Set, CapQuantity of screw:2pc. Set, with the original Mirror hole Cover (MORIWAKI), it became the most expensive Mirror in my Motorcycle history.
I think it took more than an hour to adjust this and that, but I think it turned out really cool.
Large Satisfied
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It reduces glare.
When the Mirror is attached, there is a small gap and the original Mirror can be seen.
This is an escape from Mirror's individual differences, so
It is normal for a gap to form.
The gap is so small that you have to look closely to see it, so it doesn't bother me.
The Mirror on the Right Side did not fit due to individual differences, but I warmed up the edge of the Mirror with a dryer and adjusted it.
It is a little bit easier to see backward, but...
It is not for those who expect a wide angle as it is not excessively wide.
Blue Mirror is self-sufficient.
I'm glad I put it on
View detail