Reviews
Fits: HONDA FTR223, HONDA GB250 CLUBMAN, HONDA CB400SS, HONDA MAGNA(V-TWIN MAGNA), KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W400, KAWASAKI VULCAN400, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225E, YAMAHA DRAGSTAR250, YAMAHA VIRAGO250(XV250), YAMAHA SRV250, YAMAHA RENAISSA
unique quality products
I bought this years ago. I love the clean and simple look of the handlebars. I shortened the length a little. I had a little accident. The bracket was broken, I repaired it by welding. That's why it started to rust. I love the way it looks. The mirror is very easy to use, the viewing angle is sufficient. I disassembled the fork for oil change, I will clean the rusty. I will buy another one again for my Xs 650 project. I definitely recommend it. View detail
Less blurring.
[How is it used?
Mounted on GSX-S750
Was the one you received as per Image?
As per Image. Firm and solid.
It is lower, but the visible range is the same as OEM etc.
If I could adjust it well, I could see a wider area than the OEM,
I'm not very good at adjusting Mirror ….
Was the installation difficult?
Installation itself is simply a matter of turning the hexagon.
How was your experience with it?
OEMMirror was getting scared fast, so I replaced it and it is better.
However, this too starts chattering at about 120 km/h.
[Included Parts:were they on?
Screws necessary for installation are included.
Right is also Opposite Thread Screw.
[Was there anything that disappointed you?
When you are scared, you really feel like you can't see anything.
Other items that would be helpful
Installation Point or hang
Right makes Washer a Quantity:1 pc. with a masquerade
There is no longer any interference with the OEM's Brake master.
But I don't feel like I'm stopping with Snap.
important point
Quantity:Pair (for Left and Right) Quantity as the same:2pc. When I purchased the Set, it was Shape of Right & Left Differ number.
Screw lock agent required.
View detail
(Commuting) BattleMirror
I was concerned about the width of OEMMirror and purchased it. It is not only wide, but also tall, and is built as expected.
Compared to other products, the design is more OEM-like, so I think the balance with the overall body is good.
By the way, this is the second time I bought this because the one I bought before broke.
View detail
The shape and reflection are fine, but ...
This is a comparison with AZMirror made by Tanax.
The first TANA-X AZMirror I installed was too small, and the second was too small.
I replaced them because they became difficult to see due to vibration while driving at high speeds.
It looks just like the Image and was not difficult to install,
After installing the lens, I tried riding it and found that the reflection was at the ideal large size,
It is less sensitive to vibration than AZMirror and easier to see.
Unfortunately, there is no Rubber between the Mirror section and the Body,
AZMirror was better in detail where Mirror's cut surfaces were visible.
Except for that part, Hi-Viz Mirror is better in terms of performance,
I am satisfied because this is a safer way to drive while driving.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Quality good
Side mirror is good quality, matches the look of my bike. However require to order 2 unit. Each order is only 1 side mirror. Hence, i am required to order 1 more side mirror. View detail
Stage 6 Mirror
Fast delivery within a week. Quality and appearance looks great. Easy installation. The only downside are is a zoom-in lens. With quite small lens. Zoom-in lens can be quite hard to look at. Hope you will consider the change to normal lens View detail
Good vibes
It is a little difficult to adjust the movement, but I am satisfied. View detail
Inexpensive and good
When I replaced the OEM up type separate handle with the HURRICANE Pipe Handlebar KIT, I also replaced the long OEM cowl mirror that I did not like with this mirror.
Although it is harder to see backward than the OEMCowl mirror, I am satisfied with the mirror because it is not bad looking, lightweight, and has a wide mirror surface.
An adapter was included to extend the bracket and make the rear more visible, but I did not attach it because I do not like the way the Mirror extends beyond the Bar End.
By the way, to change NINJA1000 to Handle mirror, Clutch/Brake Clamp with Mirror hole of Z1000 is required.
View detail
Fits: SUZUKI DR-Z400, SUZUKI ST250, YAMAHA YB125, YAMAHA VOX, YAMAHA TW225, YAMAHA TW200, HONDA Smart Dio, HONDA CB1100, HONDA CB900, HONDA NC700X, HONDA XR250, HONDA CRM250, KAWASAKI ZRX400, SUZUKI ADDRESSV125 , SUZUKI ADDRESSV125 , SUZUKI ADDRESS110, SUZUKI ADDRESSV100 , SUZUKI LETS5 , HONDA X11, HONDA JOKER50
The ball joint could be a little stiffer from the start….
The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …)
View detail
Fits: HONDA GROM, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA CT110 HUNTER CUBCT125, HONDA Rebel1100, HONDA Rebel250, HONDA Rebel500, HONDA CL250, HONDA CL500, HONDA GB350, HONDA GB350S, HONDA DAX125
The anti-glare effect is perfect.
Since it is simply attached to Normal mirror, anyone can install it as long as they do not fail in positioning.
The anti-glare effect is effective against the Light of following vehicles during the day when the sun is strong and at night.
The degree of wide angle is not very promising. There is no difference between NORMAL and LARGE in actual view.
View detail
it's recommended
The glare from the ledHeadlight is also much reduced and easy to see at night. View detail
It's looking good!
When adjusting the field of view by moving the Mirror after installing and fixing the Mirror Bracket, it is better to cover the screws on the Mirror side with Tapeetc. to prevent the screws from damaging the Bracket. View detail
I am mostly satisfied!
The installation work took a little bit longer than the same Mirror Non-security Compliant Type, because there were two screws to install, and I was not used to it. 。 On the other side, it didn't take much time because I was able to grab HANG. View detail
Mirror Replacement
Easy to install
This is the first Mirror I've ever installed under the handlebar.
It will take some time to get used to looking at the Mirror below the Handlebar while driving!
Blue Mirror is very easy to see
View detail
I like the blue lens and this shape.
We selected Napoleon OnMirror because there was no other mirror with a blue lens that was slightly parallel to it.
Quantity:Pair (for Left and Right) Two of these products must be purchased for installation in a
The installation was easy and quick with Bolt On, the position adjustment is wide, and the visibility is fine.
The vibration caused by the vibration is more difficult to see at high speeds than OEM products, but I think it is relatively better than other brand products.
I think it would be good if you don't want it to be Design-like and tactile.
View detail
It's more upscale and cooler ?.
Due to damage to Normal mirror, we were looking for a replacement Mirror.
As expected from DAYTONA, the MirrorBody has a luxurious feel, and the bracket part is relatively thick, so it was not difficult to see due to vibration.
The angle and position of the Mirror can also be changed as desired by loosening the Screw, making it easy to use on any motorcycle.
I chose the shorter Bracket, but the longer one would have been fine as it shows the body more easily.
View detail
Fits: HARLEY-DAVIDSON Universal
I think it's good
Mounted on a PullBagHandlebar with Handlebar height.
I am satisfied with the long shaft, which allows me to fix it at the point I like.
View detail
Amazing built quality.
The workmanship for this mirror is marvelous. Would be better if rubber bushing is included in the package so it would help to minimise the vibration that is being sent to the mirror when travelling at higher speed. Clarity would be compromised with the Speed above 100km/hr. View detail
Well, okay.
Used for square-grained CUB No. 90Custom
We wanted something that would not extend too far beyond the width of the handlebar, but still allow for fine adjustment front to back.
In the CUB, the handlebar switches and Mirror are integrated into one unit, so if the Brake lever position is set to the upper side, the Mirror will be tilted too far toward the front. Am I the only one who thinks that the lever of the CUB is too far downward, and that Mr. Honda should do something about it?
Thanks to this, Mirror fits in a good position.
The Mirror diameter is a little small, but I didn't mind.
Installation is a bit of a hassle with all the Nut.
Let's do our best while looking at the instruction manual.
For the time being, a rubber cover is attached, but the hole and the arm are not very tightly sealed, so the waterproof property may not be good.
View detail
Fits: HONDA CB1300SB, HONDA CB1300ST, HONDA CBR250R, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja650, SUZUKI GSX-250R, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI Gixxer SF250, YAMAHA FZ1 FAZER, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI Ninja400
Smaller Mirror
Product Name
DAYTONA DAYTONA Hi-Viz Mirror Diamond Short
Item Number
16947
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
10 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because the Mirror was hard to see and it was too Large.
Was the one you received as per Image?
It was as per Image. Shorter than I expected.
Was the installation difficult?
I did not find it particularly difficult.
How was your experience with it?
I don't think it's as easy to see; I should have chosen Long. But if you are more concerned about the appearance, this is the one for you.
[Included Parts:were they on?
Instruction Manual and so on.
[Was there anything that disappointed you?
expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail