Reviews
Naples Hon
I see why it's been a big seller for a long time, I can see it and Design is good! View detail
Naples Hon
I can see why it has been a big seller for so long. View detail
Replacement from OEMMirror
EliminatorOEMMirror was replaced because it was not flattering.
The mirror area is also good and reduces the reflection of LED light.
View detail
Very good mirror
I acquired this Mirror quickly because the OEM one I had purchased with the CUB 50endless limited edition car had been replaced with a different narrow handlebar and ugly squares. Although it looks beautiful and has an off-road vibe, it is regrettable that it is so easy to move around by vibration and to see if there is a mirror outside in a better location. Ultimately, after obtaining the OEM mirror, it has been removed and is currently stored in the garage as a spare item. View detail
I think it is neat and stylish.
The snail-like OEM mirror on the cowl of the CB400SB was not very nice and I didn't like it, so I replaced it with a handle mirror.
After much thought and consideration, I finally settled on DAYTONA's Quantity:2pc. I narrowed it down to Mirror, which costs just over 4,000 yen for the set, or Tanax Shark mirror5. Price-wise, it was DAYTONA.
I am sorry, but Webike was not able to get the price, so I bought it elsewhere at a much cheaper price.
I was worried about whether replacing it with a Handle mirror would contact the Cowl since it is a SUPER BOLDOR, but since no one has mentioned it in the Reviews so far, I don't know and decided to take the initiative and give it a try.
As a result, it was impossible. but with an Adapter, it was Large sturdy. Expensive MirrorQuantity:2pc. Set、AdapterQuantity:2pc. Set, CapQuantity of screw:2pc. Set, with the original Mirror hole Cover (MORIWAKI), it became the most expensive Mirror in my Motorcycle history.
I think it took more than an hour to adjust this and that, but I think it turned out really cool.
Large Satisfied
View detail
Inexpensive and good
When I replaced the OEM up type separate handle with the HURRICANE Pipe Handlebar KIT, I also replaced the long OEM cowl mirror that I did not like with this mirror.
Although it is harder to see backward than the OEMCowl mirror, I am satisfied with the mirror because it is not bad looking, lightweight, and has a wide mirror surface.
An adapter was included to extend the bracket and make the rear more visible, but I did not attach it because I do not like the way the Mirror extends beyond the Bar End.
By the way, to change NINJA1000 to Handle mirror, Clutch/Brake Clamp with Mirror hole of Z1000 is required.
View detail
It is easy to install. Anyone can install it in 1 hour.
Installation is easy with only 4 bolts. The mirrors are of a spec that will not glare at the lights of following cars, and the overall high-end look is perfect. View detail
Adjustment
I personally like this Mirror design because it is easy to match with the car body.
This is the first time I have tried to use TurnerSpec. but the adjustment is Large strange. when I try to adjust the Lens, the Turner part is pushed and turns before the Lens part.
I understand that it is natural in terms of functionality.
If the car is to be gapped on the road, we are looking at OEM diversion.
View detail
it's recommended
The glare from the ledHeadlight is also much reduced and easy to see at night. View detail
Mirror
Plating Mirror looks good but I am concerned about rust and peeling, so it was nice to have Black. View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA MT-09SR, YAMAHA MT-09, YAMAHA MT-07, SUZUKI ST250E, SUZUKI KATANA, SUZUKI GSX-S750, SUZUKI GSX-S1000, SUZUKI GSR250, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z125PRO, HUSQVARNA Vittopilen 701
I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between lef
I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between left and right? View detail
I like the blue lens and this shape.
We selected Napoleon OnMirror because there was no other mirror with a blue lens that was slightly parallel to it.
Quantity:Pair (for Left and Right) Two of these products must be purchased for installation in a
The installation was easy and quick with Bolt On, the position adjustment is wide, and the visibility is fine.
The vibration caused by the vibration is more difficult to see at high speeds than OEM products, but I think it is relatively better than other brand products.
I think it would be good if you don't want it to be Design-like and tactile.
View detail
Mirror was the easiest to see.
The texture is very good.
The mirror part of the Mirror is easy to see with color.
I've never bought Mirror other than Tanax, but I have no complaints.
View detail
Recommended for those who want to enjoy SportsCustom easily!
Due to an unforeseen trouble, we had to change the Mirror. Although it is an Adventure VST250SX, it is almost a Road model Mirror, and we wondered if there was anything that was light enough to be similar to an OFF model. We thought about it and came up with this one, which is lightweight with moderate cost performance.
It is a cheap model that is not a high-end aluminum line, and although it is quite light, it is not so poor as the OFF series, which is too weak and makes the view worse due to vibration, The mirror surface is closer to the wide side, so there is no deterioration in visibility itself.
This RidgeMirror has an Others LayerMirror (NA-002R) ProtectMirror (NA-003) It seems that there is a sibling who is the most aerodynamic in terms of design (...) as if it were the most aerodynamic. (^^) (I like it better than any of the others because of its shape.
View detail
Very good.
I had been wearing a cheap Mirror that I bought from an auction, but it was hard to see and the design was too ugly for its large size, so I bought this one with a modern design. I think it depends on the position of the Mirror rather than its large size. It is easy to adjust, I like the design, it looks good, and it is a good price. I think the Mirror is a great product from TANUX. View detail
Amazing built quality.
The workmanship for this mirror is marvelous. Would be better if rubber bushing is included in the package so it would help to minimise the vibration that is being sent to the mirror when travelling at higher speed. Clarity would be compromised with the Speed above 100km/hr. View detail
Long time favorite
I have been using this product since 1998 v-max. The OEM is round, but I personally prefer the rectangular shape and the visibility is excellent. View detail
Expensive but satisfactory
The shape of the mirror and the mirror surface reflected in the Violet give it a sense of luxury. The price is high, but it is a satisfactory product. Incidentally, this Mirror is sold by piece.:Pair (for Left and Right) Two of them must be purchased when attaching to the View detail
For those who want to increase visibility...
It has been on since I bought it and I was going to replace it as soon as I could, but it looks relatively good, has good visibility because it is MirrorLarge, and depending on how you mount it, it doesn't stick out more than a handlebar. ？？？？？ So I'm using it as it is. View detail
Fairly easy to see.
Replaced OEM Mirror due to damage.
Installation is easy but not a little cumbersome.
I think the range of visibility will be that much greater.
Mirror's appearance hasn't changed much.
View detail