Reviews
Expected
I bought it for its looks and functionality, but there was an unexpected byproduct.
I have been using a Motorcycle Cover and have often caught the Mirror when removing the Cover. This Mirror is a fixed type, so it does not gap even if it is caught. At first I was annoyed that I had to use a tool to adjust the Mirror, but I personally like the fact that it does not move once the Mirror position is set.
The product is well made and can be recommendation.
View detail
I will not shake.
I used to have a ZMirror from Mukawa, but when I was having trouble with the blurred mirror surface, I found out about this one and bought it.
The back of the car can now be seen clearly.
Mirror is also slightly colored and looks luxurious.
View detail
Cost-effective!
[How is it used?
I bought it because I thought it would look good on my Retro car!
Was the one you received as per Image?
RaySave also synergizes and looks quite good!
Was the installation difficult?
Easy installation with 17mm Wrench1 pc
How was your experience with it?
Visibility is pretty good, as good as OEM.
[Was there anything that disappointed you?
Slightly weak against vibration. The Right Side is sturdier than the Left Side, and the Left Side is more susceptible to vibration.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03
Just right Custom
I installed it on my YamahaBolt and it looks great with the Round Type, a little less visible than the OEM but not hard to see. View detail
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
Blue sky reflected in the Mirror
The purpose of purchasing the product was to improve rearward visibility when merging lanes.
Immediately after receiving the product, we started installation. First, check the approximate position by placing it on the OEM Mirror. After degreasing the mounting surface, peel off about half of the protective seal on the double-sided tape of the Mirror to be mounted, and slowly apply the tape,
One SideIt took about 5 minutes. The dimensions show a slight gap, but it did not bother me at all while driving.
I bought the Blue color this time and I think the color is good. I went out after noon and the sky was a little white, but when I looked through Mirror, I saw the reflection in the Blue sky as seen in the picture and it lifted my mood. Unexpected effect. I have not driven at night, but I feel that the visibility is not bad even when driving in the tunnel, and I do not feel dazzled by the headlight of the car behind me.
View detail
"cool
I think this mirror is still the best looking mirror.
It doesn't make it easier to see or anything, but it's expensive.
I would have gone with Shark Mirror 3, but they didn't seem to have it in stock.
Almost no difference from 3, except for the lack of bolt head covers and the markings in odd places.
I'm running with my Hexagonal Wrench until I decide on an adjustment. lol
View detail
FZ750 OEM ShapeMirror OEM
The OEM is no longer in business and there is no supply of new ones.
A few even lick around Oaktion Site.
Even if there are scratches, the price is very reasonable.
There was another OEM company, but I heard that the Mirror part is curved, so it is out of the question.
This item was not listed here, but I was relieved when I placed an order for it in the normal Mirror section.
The difference is the lack of Yamaha's Logo and the texture of the plastic part is a little worse. The color is a little bit blue. It is hard to tell from a distance.
We do not know how long the Manufacturer here will also be producing them, so if you don't mind the difference, we recommend it.
View detail
I am satisfied with the quality function design!
I am very satisfied with the quality and functional design of the product, which also cancels out the vibration from the handlebar and ensures good rearward visibility! View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It's easy.
Seal for easy installation!
The light blue reflection alone has a custom feel!
I loved it.
View detail
Naples Hon
I can see why it has been a big seller for so long. View detail
Naples Hon
I see why it's been a big seller for a long time, I can see it and Design is good! View detail
It is a good product
I installed it on my SR400. It is a good product, and the fact that it is Japanese Vehicle Inspection Correspondence is a high point. View detail
High quality!
I was looking for a Round Type with the same Image as the OEM and found this product.
The Mirror is a small size, but visibility was not a problem.
The mirror is too small to be inspected.
View detail
Fits: HONDA CB1300SB, HONDA CB1300ST, HONDA CBR250R, HONDA CBR400R, HONDA CBR600RR, HONDA CBR650R, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI Ninja650, SUZUKI GSX-250R, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI Gixxer SF250, YAMAHA FZ1 FAZER, YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CBR250RR
Parenthesis good & easy to slip through
Mirror like insect antennae of Ninja1000sx when slipping through,
It seems to hit the car's expensive Side-view mirror and is in the way.
Replaced within a week of buying Motorcycle.
Up and down Quantity:Pair (for Left and Right) The camera can be moved to a wide angle, so it is good to have flexibility. wide angle.
However, is it Reduction in cost or Bolt is all Color:Unpainted…
I painted it Black because it floats around from Body.
It's a little hard to see, but Parenthesis is better, and overall I am satisfied.
PS:I'm surprised that Motorcycle with Cowl these days is not mommy to Mirror exchange too!
View detail
OK
Quantity:I didn't have high expectations because of the price for 2pcs, but the Mirror's image quality is much better than the very cheap Mirror made in China. [Color] Clear
The Mirror part is blurred on the cheap ones, but this one looks as good as the expensive ones like Magical racing, even though it is cheap. The screws are also available in all sizes, including Opposite Thread Screws, so there is a wide range of motorcycle models to be installed. The screws are sturdy and well packaged in a neat box. Even if it breaks down, I will buy it again because it's inexpensive.
View detail
Replacement from OEMMirror
EliminatorOEMMirror was replaced because it was not flattering.
The mirror area is also good and reduces the reflection of LED light.
View detail
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Should have bought this first.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Great for people who just need it on.
It is a standard product in the Off-road area!
Tipping over is a common occurrence on forest roads and courses.
If the Mirror is attached to a bracket that also serves as a lever holder, the lever angle will change when the Mirror falls over, and the lever holder will be damaged.
This product can reduce those risks.
And by far the lightest.
As for Demerit, it is hard to check the original function as Mirror = backward
Because the legs are short and have little overhang, and the adjustment range is narrow.
I think it's best to discount the assumption of direct visual inspection in this regard.
I'm just lucky if I can see it.
I'm completely divided in that way, and I basically only drive on forest roads (load transfer and neighborhood forest roads, so there are only a few travel sections). Mirror attached. I bought it just for that!
Quantity:Pair (for Left and Right) There is a distinction between the two, but each can be mounted on either the top or bottom of the Handlebar.
Many people seem to put it on the bottom side, but I put it on the top side.
When I cut the Handlebar, I thought it might hit my Knee, and I also thought that the top one would be more natural for some reason.
Bracket is a split bracket, so it can be installed without removing anything else.
It's super easy with just one Driver!
The price is so cheap that I don't think I'll care if it breaks, but I hear it's hard to break.
Watch." I think this is the one for those who want to focus on factors other than
View detail
Very good mirror
I acquired this Mirror quickly because the OEM one I had purchased with the CUB 50endless limited edition car had been replaced with a different narrow handlebar and ugly squares. Although it looks beautiful and has an off-road vibe, it is regrettable that it is so easy to move around by vibration and to see if there is a mirror outside in a better location. Ultimately, after obtaining the OEM mirror, it has been removed and is currently stored in the garage as a spare item. View detail