Reviews
heavy
Heavy.
I felt Fashion had a lot of personality,
It is too heavy, partly thanks to unnecessary design.
The construction is sturdy and easy to see without blurring.
The Handlebar area is too heavy to be operable.
We ended up reverting to OEM.
View detail
Not good
It might be a little hard to see and I don't like it. View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
Installed on yzf-r15 India Spec. 2013 Not very satisfied
The included rubber cap was not usable because it was a size larger than Mirror.
There was not enough room in the loops of the mounting holes, and the Left Mirror was easily attached, but the Right Mirror was attached by brute force.
The Mirror in its packaging was facing the opposite way, so it could not easily be turned 180 degrees when trying to turn it.
Visibility is good.
View detail
Style is good! Accuracy is extremely poor!
It is short, small, and the handlebar area is refreshing. The back is almost invisible, but I like it because of its excellent style and texture.
The accuracy of the screws for adjusting the angle of the Mirror is so bad that the screws on the One Side are spinning around and not tightening properly. This must be replaced. What kind of tools are they using when assembling? It's just too much.
View detail
Rearward visibility increases, but ….
The Good
Good about quality and texture.
The mirror surface is easy to see due to its reduced glare and large area.
[Not so good].
Too concerned with Design, it looks lumpy and sharp.
Anyway, it is heavy.
The angle adjustment of the Body section is subtle and difficult.
I have now returned to NORMAL because of the heavy handlebar area, but I would recommend it to anyone who wants a wider rearward view.
View detail
Fits: HONDA CRM250, HONDA XR250, HONDA NC700X, HONDA CB900, HONDA CB1100, HONDA Smart Dio, YAMAHA TW200, YAMAHA TW225, YAMAHA VOX, YAMAHA YB125, SUZUKI ST250, SUZUKI DR-Z400, KAWASAKI ZRX400, HONDA TODAY, HONDA SMART DIO, HONDA JULIO, HONDA CB1000R, HONDA CB1000SF, HONDA LITTLE CUB, HONDA LIVE DIO
There are a lot of messy parts.
First of all, when I try to install the Mirror Holder with only the Included Parts:, there are so many Mirror Holder mounting bolts, each corresponding to a different size, but all of them are long.
The hole depth is not deep enough for a normal Mirror Holder.
Also, the glue used to attach the mirror surface is on the body side, and although the shape is good for Parenthesis, it is an inferior product that only looks good.
View detail
Parenthesis is good, but ….
I can't see behind me because it picks up vibration and blurs the image…. View detail
Design is Cool but
Normal mirror was available from Handlebar, so I installed it to make it easier to slip through, but the vibration absorption was so weak and shaky that it was hard to see, so I went back to Normal (tears). View detail
Impressions after 9 months of use
I like the design and have been using it for 9 months.
First of all, the paint was not applied to the edges of the Mirror when it was not used immediately after opening the package, and the surface was visible. However, after driving for a while, the turner part of the Left Side loosened and the Mirror moved at about 80km/h. I was afraid that I could not see the left rear side of the car at all on the highway. I was afraid that I would not be able to see behind the Left Side at all on the highway, and as long as the Mirror does not move, the visibility is good, but since it moves while driving, the function as a Back Mirror cannot be demonstrated 100%. I think it can be used without any problem as long as you don't touch the Mirror at about 60km/h in town driving.
I like the design.
View detail
Foldable Back Mirror is
It is hard to see backwards compared to OEM.
The small overhang was unavoidable, but there was some blurring and we eventually returned to OEM.
It should be considered as TradeOff and used according to the usage situation.
View detail
I might remove it.
I was worried about this product and the Amazon Large land-made product, but I bought it because DRC is cheaper if it is made by WeBig. I tightened it within the movable range, but it is no good. Is this the kind of parts for off-road vehicles that are supposed to fall down? View detail
Anyway, it's a blur!
It looks great and is easy to use, just shaky anyway! View detail
Anyway, it's a blur!
I was prepared for a certain degree of blurriness from the word-of-mouth, but it was more blurriness than I had imagined! View detail
Separate handle makes it difficult to see the upper rear side.
With the separate handle, it is difficult to see the upper rear side even if the mirror surface is adjusted to the fullest extent. View detail
It may not fit in Separate handle.
With a separate handle, even if the mirror surface is turned fully upward, the upper rear side is difficult to see. View detail
It was damaged.
Blister pack of Mirror packing material was damaged.
There were no pieces inside the box, so I think it was damaged during storage, not during transport.
The contents were fine, but the other party is Mirror, so please make sure you manage the storage properly. 。
I would have preferred to buy this at an actual store since the price is not much different.
View detail
It folds up easily, but...
[How is it used?
It was installed from the beginning for SEROW225W that was given to us.
This SEROW used to go mountain playing with me when I owned the previous Owner, and I saw how easily it folded up during Attack. It's so easy to fold. I thought I was using the Off-road mirror II by Takatsu was also very comfortable to use. If this Mirror gets damaged, would you consider Mirror from DRC?" I thought of it as a "one size fits all" type of thing.
Was the one you received as per Image?
Mirror gets in the way when bushwhacking or attacking difficult terrain." In such a case, the Quantity is placed just above the Mirror Holder.:Pair (for Left and Right) Simple design and mechanism that can be easily collapsed to That's because ConceptMotorcycle is often used for Dual PurPass vehicles at Motorcycle shows. It was a product that made us think.
Was the installation difficult?
Simply remove Normal mirror and install this product in the reverse order (fix it at the desired opening angle).
It is a simple product that can be installed without problems by anyone who can turn the Screw to attach and remove it.
How was your experience with it?
I thought Mirror looked useful at the time, but then I decided to get not only Mirror but also the entire motorcycle, and after servicing the vehicle, I immediately went for a test drive.
Off-road mirror. The product is quite likely to be installed in a single-cylinder engine Dual PurPass car, but this blurriness is...
If you tighten the screws on the folding part, it will reduce some, but really... Some It will only change and will be difficult to fold.
I can compromise when driving on forest roads, but I replaced it with Takatsu's OR-II because I felt it was not suitable for me because of constant shaking even on paved surfaces.
[Included Parts:were they on?
Only the product Body is contained within the Package.
[Was there anything that disappointed you?
Above. How was your experience with it? This is all that is stated in the following section.
Other items that would be helpful
Point and hang of installation
None in particular, Quantity to your preferred opening angle.:Pair (for Left and Right) Give them together and you are done.
[Availability and clarity of the Instruction Manual
The instruction manual is located on the back of the package, and is so easy to understand that it goes without saying.
[Notes]
Yamaha Motorcycles have had reverse screw type RightMirror since the 1980's (I have never owned a Yamaha Motorcycle before then, so I do not know).
[ITEMS TO BUY TOGETHER
Nothing in particular, but Quantity at Sale:Pair (for Left and Right) When the price is less than 3,000 yen at the time of purchase, you may be able to save money by purchasing peripheral parts such as Grip or Short lever to eliminate shipping costs.
[Opinions and requests to Manufacturer
Personally 160 Off-road mirror. Only the Mirror portion of the 161Off-road mirror. I would be very happy if you could change it to the Design of the "I would be very happy, thank you very much.
View detail
As I thought.
It's nice to be able to fold it up, but the field of view is still blurry. View detail
Quantity:Pair (for Left and Right) The blurring is different in…
Checking Mirror while driving at high speed, Left Side is [Color] Looks like Clear to me.
Right Side was blurred.
We plan to make adjustments in the future, as the tightness may change.
View detail
Fits: HONDA Forza350, HONDA Forza300, HONDA CB500X, YAMAHA XV1900CU, YAMAHA XV1900A XV1900, YAMAHA XV1900A, YAMAHA XV1900 Stratos Liner, YAMAHA MT-01, YAMAHA XJR1300, YAMAHA XT1200ZSuper tenere, YAMAHA XJR1200, YAMAHA VMAX, YAMAHA DRAGSTAR1100 Classic, YAMAHA DRAGSTAR1100, YAMAHA XVS950A, YAMAHA FZ8, YAMAHA XT660Z Terene, YAMAHA XJ6, YAMAHA FZ6, YAMAHA DRAGSTAR400
Poor quality…
From a distance, Mirror is beautiful, but up close, the quality of the plating is surprisingly poor.
The plating on the back of the mirror is covered with scratches, and I am surprised that such a thing is sold.
View detail