Reviews
Fits: HONDA CUB90
Quantity : 1 Set of 2pcs. This price
Quantity : 1 Set of 2pcs. This price.
It was not a cheap worse, it was a proper item.
I used it for work CUB, but it is already reserved Quantity : Even if 1 Set has it, there seems to be no loss.
Oh, 110 CUB is 10 mm instead of 8 mm so be careful.
I purchased a new Adapter. w
View detail
ClubGreen Light Sam.
I think that Mirror in this hand moves the largest Large.
I think that it depends on the car type and use, but it is really convenient on Off-road, it offset me quite a while ago, it really does not get in the way.
I also tried RALLY 50690, but I think whether this is better if I try to fold up on Compact.
The stiffness feeling is somewhat inferior.
View detail
OEM crossing
Mirror blur without single cylinder engine!
Backward vision is too good! What was the countermeasure against self-made shake so far? It is cheap but startled with perfect practical performance!
Until now I just bought with Design ignoring the function but this is within the scope of acceptance. Practicality is bad.
View detail
It is good.
I think that it is the same shape as OEM Mirror of SEA BASS CHOINORI. Compared to the SEA BASS product, it has solid problem with no problem.
If you bought the same shape with another company's product, Mirror breaks down Fixing is sweet and it looks enormous, but this is good.
View detail
Instead of OEM!
Where I was thinking that I should paint because Mirror of used and rusted was rusty, I found this item.
I did not expect it because the price is expensive, but I made it steady and elliptical shape to Stylish than NORMAL! The movable range of angle adjustment is also Large so it is Large changeable satisfaction!
If you buy this paint you will have a lot of advantages at the same time buying this product.
View detail
Large sturdy Mirror
I'm looking for a sturdy Mirror but also a good looking thing, purchased this time.
Because the outside is made wide, it is easier to check backwards slightly from the OEM.
Adjustment, Mirror Bracket tightening, angle (Stepwise) And Mirror's neck premise, there are few adjustable parts, it's simple, and there is not yet any slippage during driving.
Attachment for reverse screws is also included so there was not anything particularly missing.
View detail
Fits: HONDA CUB90
MIRAXBlack circle Plating stay Mirror
Since Mirror of CUB got rusted, I was satisfied with Large going to this Mirror if I was coloring Mirror.
I was surprised at the price. Really Quantity : 1 Set of 2pcs. I was wondering, but I was wondering if Quantity : 1 Set of 2pcs. was. I am planning to buy it for Spare again. I think that it is perfect for Restore & Repair.
View detail
Convenient Mirror
At the forest road Touring, broke Mirror so purchase.
I was worried about Trial mirror, but I was concerned about the Space of Handlebar and decided to Takatsu Off-Road Mirror II.
Very easy to install.
Impression after driving is slightly harder to see than OEM.
Vibration is not too bad.
The nice thing about this Mirror is folding.
Even safe to moss in forest road.
View detail
YAMAHARightOpposite Thread ScrewMirror and Adapter fitted with new standards
Since Mirror made by DAYTONA corresponding to the new standard was damaged, Adapter (8 mm forward screw and ? mm reverse screw) Using YAMAHARight (Reverse Screw type) Buy 2 Quantity : Pair (for Left and Right) We mounted on.
Height etc Exactly.
View detail
Makeover
Makeover wanted to exchange it.
Mirror is in 10 months and it is the third set (Lol)
I was with you earlier. "Y's Gear" Compared with the Short Type of the product, the visible range widens in the horizontal direction, making it easier to see.
Depending on the number of revolutions, I think that it is within the allowable range although it is slightly blurred. (It did not get shaken when Y's Gear was used)
Because the color of Blue is darker Custom feeling rises.
Installation requires a little hang. As I tighten Nut, the Adapter part gets relaxed so I attached Nut of the Adapter part with Screw lock so as not to loosen it. By doing this it was possible to install Firmly.
View detail
I tried it with Cool
I tried it with a Parenthesis shape
I got it on SKYWAVE, but the back slightly became hard to see, but it is not a concern.
It is a good feeling that Blue Mirror has Logo in it
I did not know that the conversion Screw was included, so I bought it separately, but it was included.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA FAZE, HONDA CB1300SB, HONDA CB400SB, HONDA FORZA
Dazzling by dimming
It seems that the water adhering to the Mirror surface spreads smoothly so that it is not wet.
I did not ride on a rainy day but I wanted to make it a dazzling Blue Mirror so I bought it.
I can see a little OEMMirror surface from the edge when installed but I am not worried much.
View detail
Fits: HONDA Universal, SUZUKI Universal
It's not only cheap. I do it properly.
It was uneasy with little review, but I was surprised by the solid result which was better than I imagined.
I installed it on C50 CUB but it feels better than OEM.
View detail
For Bw 's 125's for Repair
As Mirror got corrupted, as a result of searching for for Repair,
Quantity : Pair (for Left and Right) With this price.
cheap!
Surprisingly Mirror is expensive, is not it ~
If this price is OEM tick, COSPA is perfect!
View detail
Fits: BMW R1200GS 04-12/R1200GSAdventure 04-12,F800GS 08-12/F650GS(800cc) 08-12,HP2 ENDURO,R1200R,K1200R,K1300R
To buell
Buell was violently violent and at high speed OEMMirror was not able to say the function of Back Mirror so much as to say it was totally, but this Mirror wearing improved, it became easier to see than before. Round Type does not change from OEM Japanese Vehicle Inspection Correspondence is OK. View detail
Is good
When I went to the animal path, Mirror bought it with Jama when I pass through narrow space or under the tree. I used Short Type EnduroMirror before this, but I hated not being able to fulfill the role of backward checking on the general road, I bought it here. It is usual to use on ordinary roads, because we just fold up when we go to the mountains, it's easy to use and very satisfied.
View detail
It is a standard..
I bought two cars this time. As I purchased it at the time of purchase, I was riding, Mr. Screw tightening at the operating part of the side was sweet and it moved due to vibration.
Because it is not a troubled Large, it is perfect by tightening a little further at Phillips Screwdriver.
In addition, I will purchase the same product when I need it next time.
View detail
Standard product
Since OEMMirror is not tasty, hey MischiefSpec. Choose CROSS 2 to try to finish it.
The field of view will also become Large, and thanks to the shock absorption mechanism Spanneretc. I think that it will not be stolen easily from others to make it around unless you prepare a tool.
View detail
Tanax Napoleon On AZ Mirror
I installed it in LITTLE CUB. I liked it very much because I was also solid in making Plating and making. Only the mirror part could be adjusted with Screw and the backward visibility was enough. View detail
I attached it to SR of Separate handle.
Although it was an OEM mirror, but when pushing Motorcycle after making Separate handle, the arm hits the mirror (Such as when you disconnected Handlebar) A bit inconvenient.
Just OEM Mira likes Large.
I like Large, I made this a Separate handle and I thought that a little image change would be nice, so I bought this mirror.
I can set the arm part to the desired position and I think that the whole mirror is Offset on the front so it does not interfere with the arm and I think that it was good to buy with a feeling of stylish feeling anything.
If it is a cheap item, there are also things that do not rely on moving parts being too light and moving even if you adjust the mirror. The movable part is harder than that, it is not easy to move with vibration as easily.
As for SR, it is good that Plating suits. I am satisfied..
View detail