Reviews
Fits: SUZUKI GSX1300R HAYABUSA 99-16 GSX-R1000 01-06
It is difficult to use because the position of Mirror is not adjustable
Mirror and Arm, the root of the Arm is not working at all, and the adjustment of Mirror is not possible It's sloppy
It's Carbon Style, but it's kind of cheaply made
In addition, the Mirror is quite the same as the OEM or a little bit bigger than the OEM Balance on the Motorcycle is a little less than satisfactory It was
View detail
A fraudulent product!
This is not a Level product that should be handled Even more so because I trusted this Site
It has fingerprints and scratches, and the packaging is MirrorMatte only
There is no Package No matter how much it is CHINA, there is no such thing
Do the buyers know how to handle it, or is the Rubber frame around the Mirror partially floating around, too? I did
View detail
A classic trap
I wasn't going to write an imprint, but it was terrible, so I'll still write it
The angle adjustment part on the MirrorBody side is loose, and no matter how much Screw on the Bracket side I tried to fix it in place but the fine-tuning part moves on its own, so it's impossible to use it while driving because it's visible in the Gap
When you ask the manufacturer to replace it, there is no abnormality (= this is the Spec.), so you can replace it with a new one He said he wouldn't do it
If you're unlucky enough to get a loose one, you'll end up throwing your gold down the drain like I did (And one of the two bottles I bought was not loose)
And by the way, the quality of the paint job is nothing to write home about
I can't believe that the price is twice the price of Napole On's AZ Mirror or any other product that's so great! Quality
The quality and paint is much better over there I'm not trying to yell at Napole On This one is just too bad
This is a product that looks like the Manufacturer's Delicacy A standard item? This?
View detail
be disappointed
When I checked the product, I found out that when I put the product in the DisplayCase? I have temporarily fixed the Mirror to the Pole, but I have to use the following techniques to secure the Mirror Quantity:The SetScrew marks were firmly attached to the Pole
If the Pole is attached to the Motorcycle and there are marks in an inconspicuous direction, it helps was also there, but it was firmly attached to the direction of prominence (top side)
In case you're wondering, Quantity:Pair (for Left and Right) I bought two bottles of the minute and they were both in the same condition Disappointing
View detail
There was nothing nice about it
The Mirror was rattling and the image looked distorted and uncomfortable
My elbow hit the Mirror and shattered it easily Naturally, no Repeat purchase
I don't know if there was a quality control issue with Rose, as others have rated it surprisingly well But it was not a good product anyway
View detail
I can not fix it.
When the Fixing Screw on the back of Mirror instantly repeats slackening and tightening, Screw on the Mirror side will be broken.
The root of the Mirror shaft is also loosening soon and the Mirror turns downward while driving.
At first it was One Side, but after two months Both Sides did not become usable but changed to another car OEM Product.
View detail
NOT communal left to right.
Product is good quality. Description said communal from left to right this is not correct. Purchased two pieces for honda today 50. Thread was incorrect for left hand side. View detail
After all the stamp is ...
I knew that there was an uncracked stamp on the Body of Black Type when I saw the picture on Net, but I ordered it because I did not find a picture of Plating type, but after all I am sorry to have it firmly. (Also this is so badly prominent, why do you print on such a place ??)
Earthquake resistant (Reduction of blurring) , I did not feel the big difference as compared with other companies' ZMirror. (Also, using Short Bracket was almost the same as Tanax's AZ mirror. Bracket is thicker though. )
It may be a matter of compatibility with my Motorcycle, but I think that it is better not to make excessive expectations. (It is quite wonderful that there are many imprints of relatively high evaluation)
View detail
Fits: SUZUKI VOLTY, YAMAHA SRV250, SUZUKI VANVAN200, SUZUKI ST250, KAWASAKI 250TR, YAMAHA SR500, YAMAHA SR400, SUZUKI GRASSTRACKER, HONDA MAGNA250, HONDA SHADOW, YAMAHA VIRAGO250, HONDA CB400SS, HONDA STEED, HONDA GB250, HONDA FTR223, YAMAHA XS650, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, KAWASAKI VULCAN400, KAWASAKI W400
It is for 1-inch
22. I was looking for ClampMirror for 2 mm but this is 25. 4mm is
Please note that the description and content are different
There are many ClampMirror of this shape, but 22. It is disappointing because there is almost no present condition for 2 mm
View detail
It is the lowest.
After installation, if it is high speed or urban area medium speed or more, I reflect my hand and I have not played the role of Mirror at all. We tightened Screw again and tightened the Joint part of the Mirror itself, but finally Mirror got out of the handle and can not be reinstalled. Only the shape was good with Initial Model tick but this quality is the lowest despite the security parts. I will not buy it again. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
It was supposed to be a brand new but I was licking.
Screw was licking though it should be a brand new.
Quantity : Pair (for Left and Right) , I bought two, but only one was licking.
Since it was a brand-new one, I did not confirm each part so much, when I handed it over to others, I pointed out that I was licking, it became a little Trouble.
View detail
Movable - I bought it because I will fold it ....
It is nice to have a joint and move, but its turning over causes the disappointing joints and strength of the mounting part. Tighten the axis Screw of the joint part - Even if the mounting part is tightened tightly, the strength is not as good as the OEM Product and it has a certain visibility and degradation of the resin part - Where the useful life is concerned. Strength - If the price increases by raising the texture OK! I will buy it again. View detail
Stylish but bad quality
Even though the motorcycle is stored inside at night, after a month of installing them, there are rust marks all over them. Would not buy again. View detail
It is invisible by vibration
Installation is easy!
Quality feeling is fairly good for price.
Shape is also pretty Sharp and cool as the distance to Handlebar becomes short.
Visibility, but I can not see this at all, Arm is too light for Body being hardened Plastic
While the vibration of the Engine etc can not be killed completely, it does not become useless at all with blurring while running.
Well it depends on the Motorcycle you install - - -
I am thinking whether I will make it different though it is currently installed - - - Sorry it's pretty cool.
View detail
Screw has no mountain......... Rust is here.
What you see is what you can do with chitin.
If you observe well after the following problems occur
"Rust" occurred at the connection between Mirror and Arm
Although the problem is attachment, the Arm side is less than half of the included Bolt length only Screw is not cut out
The hole length is open but the Screw is not cut
I cleaned it by machining by myself,
Although I adjusted Mirror even after installation, I am not convinced how to adjust
Only one-third of the rear field of view can be seen
I will make it something else
View detail
Ideal as an ornamental Mirror
Impression with KTM 690 DUKE.
Clearly, practicality is almost none etc.. Yes!.
Since the viewing area is narrow and there is no vibration damping property, it is hard to see even with Idling, the installation Bracket etc are also simple, so the usability is the worst because you bow on the general road.
Unfortunately, in a few days I replaced it with another Manufacturer's item.
There seems to be an impression that Cost performance is good, but there is also a much more practical Mirror in the same price range, so it is hard to say that it is good in COSPA.
But as a good point, it looks stylish and Parenthesis is good.
I thought that user-friendliness would be even better if the Mirror area is a little larger in the design as it is. (Then Bracket and vibration - Wind measure is not usable unless it is more solid)
After that, choosing Coloring is pretty epoch-making. Since other Mirror is Black one option, if it is important to look, ant may be.
It is also advantageous that it is marketed at Motorcycle mass retailers. Since I can buy it by seeing the real thing, I think that the point that it is easy to purchase with reference to Color should be evaluated.
As a general comment, as Mirror for ornaments, ant. Practical use is absolutely pear. It does not pass even for an automobile inspection, and it is not pear even at that point.
View detail
Well
BALIBALI Look at the legendary CB child wearing it
I have longing for Napoleon OnMirror, realizing my longstanding dream
I finally wore it, Mirror from a certain speed range
Beaten by arbitrage (Angle changes) Thing turned out.
It's a tiresome Mirror that has to rectify the angle one after another
It turned out.
You can improve by bringing the Mirror surface to the inside more
It may be, but the visibility got worse and the meaning disappeared
That's right.
I evaluate it as Foldable, but if it collapses with wind pressure
It makes no sense.
(Foldable part (Screw with Cover) Do not touch
It is also written in the Instruction Manual so it can not be adjusted. )
View detail
Although it is satisfactory in price, there are individual differences that the making is cheap.
Title It's that strange, I knew that it would shake with vibration, but how about shaking from such a low speed - - -
60 km by brand new / I feel that it does not reach the reaching point as a practicality slightly to be blurred at the h position.
This one was still a good one.
View detail
Was it a bad thing?.
Just as it is cheap, the construction of details is not good.
The Mirror department was also a bit dirty from the beginning, and it did not become Beauty even if it was polished.
I do not say it until the Instruction Manual, but I wanted you to attach the Bill of Material.
I guess I bought it just looks and lost a little.
View detail
Quantity : 1pc. is
Quantity : 1pc. To know to buy twice without knowing... Body is relatively firm but Bolt rusted abnormally long and soon.
Because my Fork is thin, I rolled up the Rubber sheet, but I will exchange it.
View detail