Reviews
Great for people who just need it on.
It is a standard product in the Off-road area!
Tipping over is a common occurrence on forest roads and courses.
If the Mirror is attached to a bracket that also serves as a lever holder, the lever angle will change when the Mirror falls over, and the lever holder will be damaged.
This product can reduce those risks.
And by far the lightest.
As for Demerit, it is hard to check the original function as Mirror = backward
Because the legs are short and have little overhang, and the adjustment range is narrow.
I think it's best to discount the assumption of direct visual inspection in this regard.
I'm just lucky if I can see it.
I'm completely divided in that way, and I basically only drive on forest roads (load transfer and neighborhood forest roads, so there are only a few travel sections). Mirror attached. I bought it just for that!
Quantity:Pair (for Left and Right) There is a distinction between the two, but each can be mounted on either the top or bottom of the Handlebar.
Many people seem to put it on the bottom side, but I put it on the top side.
When I cut the Handlebar, I thought it might hit my Knee, and I also thought that the top one would be more natural for some reason.
Bracket is a split bracket, so it can be installed without removing anything else.
It's super easy with just one Driver!
The price is so cheap that I don't think I'll care if it breaks, but I hear it's hard to break.
Watch." I think this is the one for those who want to focus on factors other than
View detail
Quantity:Pair (for Left and Right) Purchased at
Quantity:Pair (for Left and Right) This is a duplicate since it was purchased at the For those who have only seen this one.
I had been using another product, but the non-adjustable moving part came loose and the Mirror started pointing the day after tomorrow while running, so I bought a replacement.
I read the Review before purchasing and eliminated any Spec. that were prone to the same symptoms as the previous one.
Mounting is 17mmQuantity:2pc 14mmQuantity:Easy to prepare 2pcs.
*100 points if there is a 17/14mm thin Combination spanner. It can be installed without it.
The arm section is rounded and can be set quite far back depending on its position, allowing rearward visibility without having to point the arm too far outward.
It was also possible to keep the elbows out of the picture even when the usual seating position is in the front.
It can also be folded up and positioned so that its presence is forgotten, as shown in the photo.
The hang should have the notch facing inward as shown in the photo.
It is perfect if you position it when folded before fixing this area.
The only Neck is OffMirror in general, but vibration at high speeds.
No matter what position I bring it to, it is so scared that I can't see behind it.
If it were 60 km/h on a normal road, it would not be a problem and I would not be concerned, but those who use the highway to travel to the forest roads should be careful.
View detail
Very good mirror
I acquired this Mirror quickly because the OEM one I had purchased with the CUB 50endless limited edition car had been replaced with a different narrow handlebar and ugly squares. Although it looks beautiful and has an off-road vibe, it is regrettable that it is so easy to move around by vibration and to see if there is a mirror outside in a better location. Ultimately, after obtaining the OEM mirror, it has been removed and is currently stored in the garage as a spare item. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA CBR1000RR, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), HONDA CBR600F, BMW R1100R, BMW R1100RS, BMW R1100GS, SUZUKI GS1200SS, SUZUKI RG500γ (Gamma), YAMAHA FZ1FAZER, YAMAHA TRX850, YAMAHA FZR1000, YAMAHA YZF750, YAMAHA TXR250 95-99, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, Others , SUZUKI RG400, KAWASAKI ZX-12R
Excellent quality.
I installed it on my gsxr750rjk. I am happy with the lightness, design, ease of viewing and adjusting everything. The price is high! View detail
Review
Fast shipping to singapore. Came with bolts and nuts to fit different fittings. Anti-Glare. Only downside is that the image is zoomed in. Would be nice if it's not so judgement could be better. Overall nice product! View detail
I think it is neat and stylish.
The snail-like OEM mirror on the cowl of the CB400SB was not very nice and I didn't like it, so I replaced it with a handle mirror.
After much thought and consideration, I finally settled on DAYTONA's Quantity:2pc. I narrowed it down to Mirror, which costs just over 4,000 yen for the set, or Tanax Shark mirror5. Price-wise, it was DAYTONA.
I am sorry, but Webike was not able to get the price, so I bought it elsewhere at a much cheaper price.
I was worried about whether replacing it with a Handle mirror would contact the Cowl since it is a SUPER BOLDOR, but since no one has mentioned it in the Reviews so far, I don't know and decided to take the initiative and give it a try.
As a result, it was impossible. but with an Adapter, it was Large sturdy. Expensive MirrorQuantity:2pc. Set、AdapterQuantity:2pc. Set, CapQuantity of screw:2pc. Set, with the original Mirror hole Cover (MORIWAKI), it became the most expensive Mirror in my Motorcycle history.
I think it took more than an hour to adjust this and that, but I think it turned out really cool.
Large Satisfied
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Ninja1000SX, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja ZX-25R
It reduces glare.
When the Mirror is attached, there is a small gap and the original Mirror can be seen.
This is an escape from Mirror's individual differences, so
It is normal for a gap to form.
The gap is so small that you have to look closely to see it, so it doesn't bother me.
The Mirror on the Right Side did not fit due to individual differences, but I warmed up the edge of the Mirror with a dryer and adjusted it.
It is a little bit easier to see backward, but...
It is not for those who expect a wide angle as it is not excessively wide.
Blue Mirror is self-sufficient.
I'm glad I put it on
View detail
This mirror is worth its price!
Finally got this attractive mirror! lol! Made of a high-quality material, and looks durable. Wide-angle view and no grade side mirror. I feel like I am riding on a big adventure bike with a unique side mirror. Easy to install on my ADV 160. However, I did a little adjustment on the distance of the mirror's arm since I installed a long windscreen and it may hit a little to the screen when maneuvering the handlebar. A bit expensive to other brand but yes, this item is worth its price. The item is secure with bubble wrap, and the mirror itself has been wrap separately from the arms. My order was shipped out earlier than the estimated shipment date. But, disappointed on the courier I chose. EMS/PHLPOST in Philippines is worst. Of course, I have to pay the handling fee of 151 pesos but the courier ask additional 134 pesos without issuing a receipt because they deliver the item to my house. So, why ask a payment for the delivery if it's door-to-door service. Overall, I am satisfied with the product. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
It is easy to install. Anyone can install it in 1 hour.
Installation is easy with only 4 bolts. The mirrors are of a spec that will not glare at the lights of following cars, and the overall high-end look is perfect. View detail
I'm happy with it
It is a Simple design, almost as good as OEM, but the functionality is Plusα. The Bellows part is back and forth from Quantity to Quantity.:Pair (for Left and Right) The Mirror can be moved to the position of your choice. Most importantly, when you fall over, the Mirror will probably run away from you, which will reduce damage to the Mirror. View detail
Because I purchased only one by mistake.
I made a mistake and only bought one, so I ordered again. m (_ _) m View detail
I think it's a good idea.
I replaced the handlebar with a new one because I could not see the Mirror I had been wearing. View detail
I can see you, I can see behind me too!
The Normal mirror only shows the ground due to the change in the angle of the Handlebar, but this Mirror allows for a good rearward view.
I also used a 1 inch BallMount and Arm from another company that I had on hand, and it worked well for changing angles and fixing.
View detail
good
I'm very satisfied with both the color and size. I ordered only one because I needed one. Don't misunderstand that 2 pairs are 1 set. View detail
Fits: SUZUKI ADDRESS V50, HONDA XR50 Motard, HONDA SS50, HONDA SL90, HONDA SL125S, HONDA MD90, HONDA CS90, HONDA CS50, HONDA CS125, HONDA CM125, HONDA CL90, HONDA CL70, HONDA CL65, HONDA CL50, HONDA CL125, HONDA CB93, HONDA CB92, HONDA CB90, HONDA CB50, HONDA C92
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
8mm Quantity:Pair (for Left and Right) Normal Thread Screw is good.
[How is it used?
YamahaCHAPPY (CHAPPY) I chose this product for a new Mirror because the Mirror for my old one was not turning due to rust and eventually broke.
The round shape for Yamaha was difficult to find a good one, so it was machined and installed.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
Quantity:Pair (for Left and Right) Since it is an 8mm Normal Thread Screw, it cannot be attached to CHAPPY as it is.
On the Right Side, the hole was extended with a 6.8mm Drill and the M8 tap stood up, and on the Left Side, the M8 tap was cut by removing the Inserted Resin Parts.
Handlebar Switch is Material:It is aluminum, so it is 6.8mm, but there is no particular difficulty in hand drilling.
How was your experience with it?
Visibility is good.
I thought it was a little long for what it looked like. I thought it was a little long, but it turned out to be as I expected.
[Included Parts:were they on?
MirrorBody only.
Nut is originally attached to the Body, so there is no need for it.
[Was there anything that disappointed you?
Not particularly
【Review】
I am satisfied with the round Mirror Style as I expected at this price.
8mm Quantity:Pair (for Left and Right) The Normal Thread Screw was easy to modify and install.
View detail
It fits the aperture Handlebar.
I replaced the handlebar, but the OEMMirror is too long and looks like a bug's antennae.
Installed by Short.
It fits well with the aperture handlebar and is easy to see behind.
View detail
Fits: HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
Quality as good as OEMParts
The Mirror of Crf250RLY50 is OffMotorcycle, but the Mirror that looks like a big road motorcycle is Standard Equipment.
We chose this one, which has the same shape as the XR250OEMMirror.
The appearance, texture, performance, and quality are the same as OEM Mirror.
liked it
View detail
Mirror
Plating Mirror looks good but I am concerned about rust and peeling, so it was nice to have Black. View detail