Reviews
กระจกมองข้างทรงกลมพร้อมขาหนีบเพิ่มลูกเล่นใหม่ให้แก่ตัวรถจักรยานยนต์ของคุณ รายละเอียดสินค้ามีความเงาและชุบโครเมี่ยมที่ดี View detail
Lightest weight, highest quality Mirror.
[How is it used?
I was looking for a product that would meet my needs in terms of appearance, performance and stability, and I knew that Magical racing was the one I was looking for.
Was the one you received as per Image?
The image is just as it should be, high quality, and so lightweight that one wonders how Mirror can be so light. It is so lightweight that you may wonder if Mirror is really that light. Moreover, it is well made, so there is no fear of it being damaged while driving.
Was the installation difficult?
This is a common installation method, so there is no problem. However, the combination with Arm and position adjustment depends on the Motorcycle.
How was your experience with it?
Once you use Mirror, you will not be able to use any other company's Mirror. It looks good and is lightweight, but above all, Mirror does not shake at all, no matter what the speed is. Even when driving at full throttle in a circuit, the rearward vision is still there.
[Included Parts:were they on?
Everything is provided, but I purchased the Short arm separately. The length can be adjusted by replacing the Attachment.
[Was there anything that disappointed you?
Gold amount is … however, I think it is reasonable considering the quality.
View detail
Design is Cool but
Normal mirror was available from Handlebar, so I installed it to make it easier to slip through, but the vibration absorption was so weak and shaky that it was hard to see, so I went back to Normal (tears). View detail
enduro doubletake mirror
Thank you so much webike. This is my 4th time to purchase and you always amaze me with your outstanding service and amazing products. The doubletake mirror has a robust build and is stable even on high speed. It is so easy to install (no tools needed) More power and im looking forward for my next purchase View detail
Impressions after 9 months of use
I like the design and have been using it for 9 months.
First of all, the paint was not applied to the edges of the Mirror when it was not used immediately after opening the package, and the surface was visible. However, after driving for a while, the turner part of the Left Side loosened and the Mirror moved at about 80km/h. I was afraid that I could not see the left rear side of the car at all on the highway. I was afraid that I would not be able to see behind the Left Side at all on the highway, and as long as the Mirror does not move, the visibility is good, but since it moves while driving, the function as a Back Mirror cannot be demonstrated 100%. I think it can be used without any problem as long as you don't touch the Mirror at about 60km/h in town driving.
I like the design.
View detail
Looks surprisingly good on you.
As the name suggests, the Mirror of this round type is an image that suits Kawasaki's NAKED, but it also looks great on the XSR, which is classified as a Neo-class.
Also, the Material:Aluminum is not as expensive as foreign makers.
View detail
Compare with Takatsu's Trial mirror
I flirted with Trial mirror in Takatsu but came back to DRC.
Takatsu has a small Mirror surface and a very narrow angle adjustment range.
The DRC has a larger mirror surface and a very wide angle adjustment range. This drastically reduces the number of times I have to turn around to look behind me while driving. I replaced the DRC Mirror with the DRC Mirror for safety reasons.
View detail
Loosening of the folded movable part is
I buy Repeat because it is essential Items for forest road touring.
Since Mirror's foldability is the main selling point of this product, we are concerned about the looseness of the screws in the foldable part.
Demerit and I had a more serious mistake when we first bought the Mirror, we had the Mirror in the upright position and hooked it to the helmet that we had taken off. After a while, the moving parts folded up and I dropped my new helmet on the Asphalt, ruining it. Since then, I have frequently adjusted the hex screws on the moving parts. It loosens with vibration...
View detail
Fits: HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR250R, HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA XLR BAJA (BAJA), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service), HONDA SUPER CUB DELIVERY (SUPER CUB Postal Service)
Fits old Honda Motorcycle
Purchased for use in Honda's Initial Model R&P. In recent years, motorcycle parts, both Bracket and Mirror, are short and compact.
It was difficult to find something that was easy to see, so I kept looking and finally found it. I am now using it with satisfaction.
View detail
Fits: HARLEY-DAVIDSON Universal
It is almost invisible.
If you are only looking at it, you will be satisfied, but not as a Mirror.
You have to twist your body to see behind you.
View detail
The viewpoint to Mirror is farther away, which reduces eye movement and makes it easier to check the rearward direction.
[How is it used?
Mirror problem that I personally had been struggling with right after I bought my SV650X.
Perhaps it is because I am not accustomed to riding a naked type motorcycle with separate handlebars, but it is difficult for me to see backward with Mirror.
I had owned a good number of Separate handle type motorcycles, but all of them were full cowl type, so the Mirror was cowl mounted far forward of the handlebar. The SV650X, however, has a long bracket from the handlebar mirror holder to the front of the handlebar, and the mirror is mounted on the handlebar in a cowl mount far forward of the handlebar.:Pair (for Left and Right) Since it is on the Close to the point of view." + Mirror bracket section is long. Quantity for Mirror:Pair (for Left and Right) The distance between the two points makes it difficult to check the rearward direction only by eye movement.
I am a timid person with poor driving skills, so I had to check the back of the car more often, so even if I did a little work each time, the fatigue would accumulate over the distance and time and become a stress.
Was the one you received as per Image?
In the midst of all this, I found Napoleon On's "BAREN T.T. MirrorMirrorEX", the rise of the bracket from the front of the Mirror Holder and the adjustable angle of the bracket were just as I imagined.
Was the installation difficult?
Simply remove the existing Mirror and install this product; rather, installation is easier than with Normal mirror.
Just set it to the Position of your choice, and then use the Quantity:Pair (for Left and Right) may be somewhat cumbersome to adjust to the same opening.
How was your experience with it?
The mirror's mirror surface is more forward than that of the Normal mirror, so the viewpoint movement is reduced to a Large width, making rearward visibility easier.
[Included Parts:were they on?
The MirrorBody contains two Bolts for mounting to the Holder, one Opposite Thread Screw and one Pure Screw.
[Was there anything that disappointed you?
Disappointing, I would say, personally. I would like to have a VERSION with a longer bracket by about 10mm. Is it like that?
Other items that would be helpful
Point and hang of installation
No difficult task, but Quantity:Pair (for Left and Right) Mirror of Quantity at the same angle with the same opening.:Wouldn't it be better to have it set to Parenthesis in terms of Balance?
[Availability and clarity of the Instruction Manual
There are simple instructions on the back of the Package, but there is only one way to attach it, so there is no need to be confused.
[Notes]
If not firmly secured, they may begin to loosen due to vibration or wind pressure, causing you to panic while driving.
After installation & adjustment, be sure to check the tightness (but be careful not to over-tighten).
[ITEMS TO BUY TOGETHER
Nothing in particular. It may be possible to replace the parts of interest around the Handlebar with parts you like while replacing Mirror.
[Opinions and requests to Manufacturer
I have been relying on you for a long time to line up Mirror of various designs, and I hope that you will continue to maintain the lineup.
View detail
Design is good, but you can't see the back
When I replaced the handlebar, the angle of the BAREN Mirror Mirror I had been using was no longer suitable, so I searched for a similar Mirror of a Small Type and decided on this product.
In terms of design, it is nice, reflecting and not conspicuous.
However, you cannot see the back.
I wish the bracket was 5cm longer.
Also, the narrow width of the upper and lower sections makes it difficult to see the back of the car on slopes. I wished the upper and lower widths were 1 cm wider each.
I am well satisfied with it myself, but I would not recommend it unconditionally to others in terms of visibility.
View detail
Preliminary.
Is it too much to ask for OEM-like ease of seeing in Foldable, which needs to be adapted to the usage situation for rearward checking and blurring? View detail
Foldable Back Mirror is
It is hard to see backwards compared to OEM.
The small overhang was unavoidable, but there was some blurring and we eventually returned to OEM.
It should be considered as TradeOff and used according to the usage situation.
View detail
Installed on GSX s1000
Feels very good as tightly! View detail
Installed on cb400sb Changed from Cowl mirror to Handle mirror
Installation of Tanax Napoleon Shark6 on cb400sb NC42.
The difference from Shark3 seems to be that the mounting Bolt is Stainless Steel.
However, the Stainless bolt is painted Black, but the paint is messy and there is paint buildup in the Cap section, so the Hexagonal Wrench will not fit.
The supplied bolt was not used, but a cap bolt was purchased separately at a hardware store.
I used a Bolt that is 5mm longer than the supplied Bolt because it is tightened together with the Plate, which is used to attach a switch and voltmeter to the DRA RECO Switch.
I was disappointed with the included Bolt, but I am glad I bought Mirror itself.
View detail
I might remove it.
I was worried about this product and the Amazon Large land-made product, but I bought it because DRC is cheaper if it is made by WeBig. I tightened it within the movable range, but it is no good. Is this the kind of parts for off-road vehicles that are supposed to fall down? View detail
Design is good, but,
The design and overall construction is good, but I think the quality is commensurate with the price. View detail
Yanashiro Tanax
Its absolutely goreous, the mirror is nice and very easy to install. My bike looks so great with this mirror. The mirror come in pair, thats good, price is pretty cheap compare to what i got! I strongly recomment these for whom finding an option to replace oem mirror! View detail
Anyway, it's a blur!
It looks great and is easy to use, just shaky anyway! View detail