Reviews
Fits: HONDA FTR223, HONDA GB250 CLUBMAN, HONDA CB400SS, HONDA MAGNA(V-TWIN MAGNA), KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W400, KAWASAKI VULCAN400, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225E, YAMAHA DRAGSTAR250, YAMAHA VIRAGO250(XV250), YAMAHA SRV250, YAMAHA RENAISSA
unique quality products
I bought this years ago. I love the clean and simple look of the handlebars. I shortened the length a little. I had a little accident. The bracket was broken, I repaired it by welding. That's why it started to rust. I love the way it looks. The mirror is very easy to use, the viewing angle is sufficient. I disassembled the fork for oil change, I will clean the rusty. I will buy another one again for my Xs 650 project. I definitely recommend it. View detail
Installed on an EC250.
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
I enjoy exploring the forest roads I find while touring, and I often find that Mirror gets in the way on forest roads, so I love this Mirror, which can be folded and stored compactly.
To be honest, it is difficult to check the rearward view, and there are some parts that shake due to vibration, but I don't feel like wearing anything other than this Mirror, which can be stored in the compact size.
View detail
Nice Design, BUT
It is a small and cute mirror suitable for classic motorcycles. The quality of the painting surface is good and the texture is strong. However, when I changed the position of the mirror of the new product, there was a deep wound. I'm fitted with a new product, but others would think I bought a used one. View detail
Parenthesis good
Clamp is solid and no problems.
Visibility is not as good as OEM, but it is within the acceptable range.
I like it because Parenthesis is better than anything else.
And the price is reasonable!
View detail
Good quality
It's good to give off a classic look. Good finish and neat design. It's easy to adjust the handlebar size because there's an extra gasket in it. View detail
Not bad
Not bad considering reasonable price. Nice minimal/vintage/classic design. Visibility is not so great . And SR400 high vibration may be a problem since the mirror itself and stem is very light weight. View detail
Fits: SUZUKI VOLTY, YAMAHA SRV250, SUZUKI VANVAN200, SUZUKI ST250, KAWASAKI 250TR, YAMAHA SR500, YAMAHA SR400, SUZUKI GRASSTRACKER, HONDA MAGNA250, HONDA SHADOW, YAMAHA VIRAGO250, HONDA CB400SS, HONDA STEED, HONDA GB250, HONDA FTR223, YAMAHA XS650, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, KAWASAKI VULCAN400, KAWASAKI W400
It's well built
When tightening Bolt, it is better to use a pad cloth. The paint peeled off due to rubbing by the tool. View detail
Fits: HONDA FTR223, YAMAHA VIRAGO250, YAMAHA DRAGSTAR250, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225, YAMAHA DRAGSTAR400, YAMAHA RENAISSA, YAMAHA SRV250, YAMAHA XS650, KAWASAKI VULCAN400, KAWASAKI W400, KAWASAKI W650, KAWASAKI 250TR, HONDA GB250, HONDA STEED, HONDA CB400SS, HONDA SHADOW, HONDA MAGNA250
the beautiful side mirror mounting review
The side mirror is mounted downward, so it seems to be simplified and gives a clean feeling. But the delivery is late and a little disappointing. Quality seems to be as priced. But I'm so pretty after the installation. And you should be careful to get a side view. View detail
Cost-effective! Well made!
I bought this Mirror because Shovel's Mal Mirror was RustRust and difficult to see.
The clamp portion had the same shape as the existing Mirror and was easy to replace.
The visual quality is only slightly better, but the Square Mirror alone makes the Image more rigid.
Since it is cosmetic, it is good to replace it when it gets rusty or tired, as the mood strikes.
View detail
Fits: HONDA FTR223, HONDA GB250 CLUBMAN, HONDA CB400SS, HONDA MAGNA(V-TWIN MAGNA), KAWASAKI 250TR, KAWASAKI W650, KAWASAKI W400, KAWASAKI VULCAN400, SUZUKI GRASS TRACKER, SUZUKI ST250, SUZUKI RV200 VANVAN, SUZUKI VOLTY, YAMAHA SR400, YAMAHA SR500, YAMAHA TW200, YAMAHA TW225E, YAMAHA DRAGSTAR250, YAMAHA VIRAGO250(XV250), YAMAHA SRV250, YAMAHA RENAISSA
Great Quality Mirrors
Love these mirrors. Bolt up nicely to the forks and are completely adjustable to get them pointing exactly where you want them. Once they're set they stay nice and firm and no need to readjust. Nice quality over all finish and the mirror glass is clear and reflection is crisp View detail
Fits: Others , KAWASAKI VULCAN400, KAWASAKI W400, KAWASAKI W650, KAWASAKI 250TR, SUZUKI VOLTY, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI GRASS TRACKER, YAMAHA XS650, YAMAHA RENAISSA, YAMAHA SRV250, YAMAHA VIRAGO250, YAMAHA DRAGSTAR250, YAMAHA TW225, YAMAHA TW200, YAMAHA SR500, YAMAHA SR400, HONDA V-TWINMAGNA MAGNA250, HONDA SHADOW
It looks surprisingly good.
Back Mirror to be used by clamping to Front fork.
I introduced it to make the front area simple.
I thought that this kind of Mirror is design priority, and it is necessary to sacrifice the practicality, but surprisingly, the rear visibility is not so bad. The visibility is like the Type which is slightly enlarged and projected.
The image used is that of looking backwards over your shoulder or arm, as opposed to looking over your shoulder or arm with a standard Mirror.
Note that the amount of eye movement increases. I use normal Mirror for Right Side and this for Left Side.
If you drive on the Bypass with the flow of cars, it will be blurred. I don't know what type of car is following me, but I can check whether there is a car or not.
For installation, the supplied bolt is too long, so I prepared a stainless bolt separately. If you don't mind, you can leave it as it is.
Also, I don't know the size of the screw that stops Bracket and MirrorBody. I couldn't find the right size of wrench among the tools I have. So I use a small Hexagonal Wrench and tighten it to the extent that I don't lick it.
The rear view is not bad and I am generally satisfied with the Custom that I aimed for.
View detail
It's a little hard to see, but it's okay
I installed it on my Honda ATC, it's cool, it's a little hard to see, but I like it just fine This is a buy
This is good for people who care about looking good
View detail
It looks neat!
It's a bit large for a size I thought until I installed it, but when I made Size small and did not see it, it was the end of the world It is a good size for me It's not a bad thing to look at and it's not a bad thing to look at, but it's fashion and the best of the costumer View detail
Fits: SUZUKI VOLTY, YAMAHA SRV250, SUZUKI VANVAN200, SUZUKI ST250, KAWASAKI 250TR, YAMAHA SR500, YAMAHA SR400, SUZUKI GRASSTRACKER, HONDA MAGNA250, HONDA SHADOW, YAMAHA VIRAGO250, HONDA CB400SS, HONDA STEED, HONDA GB250, HONDA FTR223, YAMAHA XS650, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR400, KAWASAKI VULCAN400, KAWASAKI W400
It is for 1-inch
22. I was looking for ClampMirror for 2 mm but this is 25. 4mm is
Please note that the description and content are different
There are many ClampMirror of this shape, but 22. It is disappointing because there is almost no present condition for 2 mm
View detail
To VIRAGO 250
It looks good, the price is also cheap. And there is no problem in performance.
Ideally it is Mirror for me.
I think that it is the best Mirror to make Silhouette with nothing above Handlebar.
View detail
Quantity : 1pc. is
Quantity : 1pc. To know to buy twice without knowing... Body is relatively firm but Bolt rusted abnormally long and soon.
Because my Fork is thin, I rolled up the Rubber sheet, but I will exchange it.
View detail
Easier to see than I thought.
OEMMirror's resonance was so bad that I replaced it with another company product. Refreshing on the Handlebar and feeling a little Custom feeling is also good.
It does not get in the way and I am satisfied with Large.
Since it is Up Handlebar, it does not interfere with Tank even at this position.
It is recommended because the price is not so expensive.
View detail
There are some difficulties in installation
First, Mirror is not normal. It seems that it is becoming an enlarged Large mirror. Because Small Mirror, I thought it was good, I was annoying myself. I wanted you to write it in item description. There is a very uncomfortable feeling because the angle of view is different around Mirror. It is dizzying.
If you get used to it Large if it is durable, expand from the beginning Large mirror if good, maybe.
And the worst is Mirror's fixed potato Screw !! Because the system is too bad I can snap so quickly. 1 in 6 M. 25 I do not have any special Screw so I was giving up 1 / There was 4 Screw, so I was able to do it with this. Because it was 1 pc 8 yen, is it good?. I can not recommend it for people who care about the appearance or those who do not have a home center nearby. Because it is cheap Gaman.
View detail
Installed on GB 250 CLUBMAN
Mounting on HandlebarRight Side.
It looks also Large thing but buy backward confirmation to buy properly.
Large is also Large Tiny and Small is not too good.
Since Bracket also has a length, it has a large adjustment width and it is easier to check the back.
However, if you attach to the direction of the previous one, the GB 250 CLUBMAN needs to be adjusted to a good position because it is too much to vibrate.
Satisfied and satisfied.
View detail
Be careful as you can not get Screw
Almost the same as those in KIJIMA etc.. It looks like.
The condition and construction of Plating is almost the same etc..
Whether it is GOODS or KIJIMA, Small I can not see it surprisingly well, so I like your favorite
It is Mirror.. I've liked it too much so I've used 15 books so far w
You have to be careful that the Mirror part is fragile. When a hard object hit
It cracks easily. The thickness of Mirror is sufficient, but there is not much stickiness.
Although I ran normally and never cracked, there was a little lack of the lower side once
There will. Although I might have hit it while I was not aware..
As Pole's Screw becomes rusty and hard to remove, it is necessary to periodically attach / detach it, or Thread compare
You had better paint the wound.
More than that, the disadvantage of the biggest Large is mounting Mirror Screw (Pole and Mirror
Potato Screw) can not be removed.
It rusts anyhow here. In the worst case, it is necessary to perform a cutting procedure like the attached image
To become.
This potato screw part is a troubling place because it is a part of exchange with good-looking goodness, but Thread
Periodically paint to regularly apply rust prevention, replace with M6 Bolt
You'd better do it.. Zed Thailand.
View detail