Reviews
Handlebar
I purchased this product along with Cut-outClamp.
It is also a good PARTS with excellent cosmetics.
View detail
Angle Bar
Angle Bar installed.
The angle can be changed in detail, so I was able to adjust the Position to my liking.
View detail
Fine tuning is by Large
It is useful for fine tuning during Fork Mounting. View detail
A bar that could be used for many things.
Bar.
It is a hollow bar with no holes.
In addition to the Handlebar, this bar can be used in different ways depending on the application, and is highly universal and has excellent cost performance.
You can use it like a Multi Bar and it comes with two bottles, so it's a great bar.
I think it would be an interesting bar if there were more color variations.
View detail
Recommendation for fine adjustment of the Handlebar position
[How is it used?
Mounted on Triumph's STREET TRIPLE
Was the one you received as per Image?
It was just as I imagined it would be, with No Color comparable to the picture.
Was the installation difficult?
I just plugged it into the Separate Handlebars that were already installed and it was not difficult.
Of course, it will be possible to remove the Grip's Bond and Switches.
How was your experience with it?
I was able to adjust the Sauce angle on the Separate Handlebars to achieve the ideal Position.
Specifically, it was hard for me to lean forward, so I installed it in a way that eased that a bit.
If you are not happy with the position of the Handlebar, or if you are a rider who wants to fine-tune the position of the Handlebar, this is a very useful Handlebar.
View detail
Buy 25mm at Repair
[How is it used?
I'm using a ZETA Pilot Handlebar (45mm) on my Racer YZF-R25.
I bought it from Repair because when I fell, the Handlebar as well as the Handlebar Bracket was bent.
Was the one you received as per Image?
As you can see in the image, the 45mm was too big and bent, so I chose the 25mm.
Was the installation difficult?
It's so easy, it only takes three bolts to stop it!
How was your experience with it?
The Fee Ring is the same as before. Also, since it's now 25mm, there's no more bounce.
As a result, I'm happy with the 25mm.
[Included Parts:were they on?
Included Parts:There are none!
[Was there anything that disappointed you?
There is a little bit of BALI, which is a bit of a bummer, but it's not domestic, so it can't be helped.
View detail
To Repairfor Falling Down
[How is it used?
I bought this for my YZF-R25 which was converted to a racer, and the handlebar itself is a ZETA Pilot Handlebar.
Was the one you received as per Image?
It was mostly as per Image, but a bit subtle as it is slippery to the Clutch Side.
Was the installation difficult?
There's nothing difficult about it. Just replace the Handlebar that comes with it.
How was your experience with it?
It's a little longer than the ZETA bars. It's about 10mm longer.
The Throttle side is nice and slippery, but the Quantity:Pair (for Left and Right) The whole surface is smooth.
To be honest, it's very subtle because it slides like Switch box and Left Side Grip.
Only the part where Throttle cone is attached like ZETA bar is slippery.
I think Others should choose textured bars.
[Included Parts:were they on?
It comes with what looks like an End cap. This is a nice Included Parts:.
I transplanted it to the ZETA bar. lol
View detail
To be honest, it was subtle.
[How is it used?
Used for Racerized YZF-R25.
Was the one you received as per Image?
This is the bar with Angle as per Image.
Since Memory is marked, Quantity:Pair (for Left and Right) You can align the Angle in
Was the installation difficult?
Installation itself is no problem, just a normal swap!
How was your experience with it?
To be honest, it was a bit subtle! The addition of Angle gave us a wider range of adjustments, but
It's kind of weird Angle, or it's weird when the bar is bent...
It's not a product defect, but I would recommend using the Straight bar.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
It was kind of weird because none of the hanging angles felt right.
View detail
I'm buying for Repair!
[How is it used?
It is used for YZF-R25 of the race vehicle, and Separate HandlebarsBody is also for Repair with Pilot Handlebar of ZETA.
Was the one you received as per Image?
It was just like the Image, of course. It's the same bar that came with the first one!
Was the installation difficult?
Nothing difficult to do, BoltQuantity:Loosen 2pc, replace and you're done.
How was your experience with it?
I bought it from Repair because I fell over and it was bent into a heap.
Even if you don't use ZETA, you can get the bar from many manufacturers.
I chose this Repair product because I wanted to use the same one after all.
[Included Parts:were they on?
There's nothing here! Just a bar.
[Was there anything that disappointed you?
There is none at all! Only the Throttle side is treated smooth and is GOOD.
I also bought the DAYTONA bars, but Quantity:Pair (for Left and Right) I think it should be smooth on all sides and the Clutch Side should be rough like ZETA.
View detail
Handle position is now easily aligned.
[How is it used?
Fitting of Z900RS CAFE Handlebar
Was the one you received as per Image?
Yes
Was the installation difficult?
No, this is a normal Level for a Handlebar replacement.:Pair (for Left and Right) We can work on them separately.
It's easier than replacing the Pipe Handlebar.
How was your experience with it?
The STD Handlebar was too low and too wide for me, so I decided to make it in the right position.
I'm glad we were able to get it in order.
[Included Parts:were they on?
There are no other Included Parts:that are required.
[Was there anything that disappointed you?
No, there is not
I think that it is good to position the hole for the switch box slightly carefully and carefully.
View detail
If you process it, you can pimp it.
Installed in combination with Cut-outSeparate HandlebarsSystem50φ.
You can change the Sauce angle to your liking.
Since it has an approximate Memory, the Quantity:Pair (for Left and Right) Easy to match the Sauce angle of
If you leave it as it is, there is too much length, so you need to Cut it to the appropriate length.
In the photo, I set the Sauce angle to the largest.
As it is, it will interfere with Cowl, so we'll take our time and see how it goes.
View detail
Maybe just a little longer.
The Angle Bar is my favorite because you can always find the angle you like when you turn it round and round. However, if you want to attach it to an mSS, etc. Is it a bit long? Because it is aluminum, it is easy to cut, and if the cut end is in order, the Blind cap can be reattached and used as it is, so it is possible to restore it as if the difference was also so. View detail
feel well
I purchased Impact's Separate Handlebar Kit as a remedy, now it is attached to the company's Fork Cramp and used it. I got lost because it was Silver or Black, but it was a correct answer to Black. Handlebar around looks tight. It is easy to open the hole of the Switch box, but I'm satisfied because it is not easy to hurt Material. View detail
Cospa is good
In Universal's Separate handle that I have, I did not have a Bar End, so I bought it.
It is beautiful Anodized Finishing.
Size is 22. It was 2 mm so I was able to attach it to Clamp which I had.
Just removing Cap removes the hand slightly or only a single cut is slightly distorted.
I caught Bar End, but I am a little concerned about distortion.
Since there is no way to take off unless you apply a strong force, those who do not mind are good.
View detail
The low price and high quality of DAYTONA products are becoming to generate a feeling of reliance these days. And so I had no doubts about choosing this part.Now about this angle bar.It is light and durable. The anodized coloring is beauti
The low price and high quality of DAYTONA products are becoming to generate a feeling of reliance these days. And so I had no doubts about choosing this part.
Now about this angle bar.
It is light and durable.
The anodized coloring is beautiful.
The angle can be adjusted finely.
You should adjust the angle to where your wrist settles all right!
Still, I will rate it with 4 stars, for I had been expecting more!
View detail
He bought it by the Handle and Set of the company.In order for one Bolt to fasten to the Fork, the large Bolt is attached.way may say an anxious person. [ which carried out the Screw-lock application ](I did not apply) Although the pu
He bought it by the Handle and Set of the company.In order for one Bolt to fasten to the
Fork, the large
Bolt is attached.
way may say an anxious person. [ which carried out the Screw-lock application ](I did not apply) Although the
pure Clamp was the structure which does not shift to a Fork fixed + Top-bridge flesh side at the time of a fall since it was a Screw stop, since this is only Fork fixation, when it falls, it may hit a Tank.becoming work since fixation is the above-mentioned Bolt, while adjusting the angle of a Clamp, and the angle of a Handle at once, although
Handle angle can also be changed finely -- one of adjustments are difficult.If a price is considered although it is , I will think that it is cheap.
View detail
Type GSX-R1100 was equipped for 93 years.Although the Bar handle was temporarily [ ] used, on the highway, the posture was raised too much, and since it was hot on the contrary, this product was purchased.It purchased by the Separate Handle clamp and
Type GSX-R1100 was equipped for 93 years.Although the Bar handle was temporarily [
] used, on the highway, the posture was raised too much, and since it was hot on the contrary, this product was purchased.It purchased by the Separate Handle clamp and Set of
company, and this product was attached once it returned to the pure Handle.
attachment and fine adjustment are easy and a fixed state also has sense of security.It becomes easy on the both sides of
town riding and a highway, and evaluation of a Tandem-rider Rider is also very best.
View detail
Structure is also solid and a Cost performance is good above all. Since it is about 1000 yen per one, it is good also as a Spare parts. If the End cap is the form appropriate for a Bar end to a slight degree, in addition, it is good.
Structure is also solid and a Cost performance is good above all.
Since it is about 1000 yen per one, it is good also as a Spare parts.
If the
End cap is the form appropriate for a Bar end to a slight degree, in addition, it is good.
View detail
the simultaneous purchase of a Top bridge -- it carried out. Although simultaneous purchase of the time of purchase was carried out by necessity, if structure target understands, it can make from a 500 yen grade in a Home center etc. Sinc
the simultaneous purchase of a Top bridge -- it carried out.
Although simultaneous purchase of the time of
purchase was carried out by necessity, if
structure target understands, it can make from a 500 yen
grade in a Home center etc.
Since it purchased with much trouble, it attached, but when using a Separate handle, since there are much expenses, such as the
Wire, it is somewhat useless shopping.
View detail