Reviews
Thanks to this, Shark mirror5 was installed in SUPER BOLDOR.
This time, I don't like the snail-like cowl mirror of CB400SB, so I decided to replace it with a handle mirror like Naked motorcycle.
So, first of all, which mirror would suit CB400SB the best? After much agonizing, I finally decided on the Shark mirror5 from Tanax. I had a hard time because the price was too expensive even though it was only a mirror, and I had a hard time here, too. (Sorry, it was much cheaper than Webike.)
Finally, I tried to install it, but it hit the cowl when I tried to put it on normally. I almost lost my mind, but since I had bought an expensive Mirror, I decided to go ahead and buy an OffsetHolder-45 (which was also too expensive!). In desperation, I decided to use Quantity:2pc. Set was bought, and Challenge was made to install it again.
As a result, thanks to this OffsetHolder, I was able to install it without hitting Cowl. It is like the OffsetHolder is attached to the original Mirror as well, so the Quantity:2pc. It looks like you are attaching OffsetHolder of Set, but it is attached in a nice way.
There are two reasons why we chose four pieces:One is to fasten iron to iron with bolt so that it does not slip, and the other is to use something like genuine leather or rubber to hold the bolt in place.:I wish it had been attached as a set, and the price is too high. However, I think the precision is fine and the construction is perfect. And since they are made by TANA-X, I don't think there will be any problem at all.
I have also tried to see if it would move with vibration after installation, but so far there seems to be no problem.
Personally, I think it turned out really cool. By the way, I spent a lot of money on MORIWAKI products to cover the hole in the cowl mirror. (I was already in a state of desperation.)
View detail
Good for dress-up use rather than functional use!
Normally I could only let go of my Left hand when I was tired, but thanks to these Parts, I can also let go of my Right hand? I can also let go of my Right hand thanks to these Parts.
SpeedQuantity:Set requires hang, but you will get used to it.
Parenthesis is good just by putting it on. (Lol)
View detail
By Motorcycle!
I use it instead of the cruiser, and it has been working fine on my CB1300SF, although it has loosened a little due to vibration. I am afraid that it might break because it opens its mouth during installation. It seems to relieve my shoulder stiffness since I don't have to keep twisting the Axel while driving. View detail
For Smartphone Holder
The Clamp is very useful for my SuCUB, because I have to tighten the Clamp to the Mirror and then attach the Smartphone Holder. If the Clamp is facing the wrong way, your head will be in a state of a ring of wisdom, so please check carefully before purchasing. View detail
It was a little short!
After installing Extension India on PCX, Mirror and Extension India interfered with each other, so I bought this as a countermeasure. I had no choice but to adjust it by shifting the Extension India, but the interference could not be improved, so I decided to ride it as it is. I will buy OffsetHolder45 later. View detail
I like it! I'm curious about some things.
Originally, I bought it as a countermeasure against Throttle's Wobble.
Look what I got.
I'm not sure I'll be able to get a gutter on this thing.
So, installation
2 dowels are designed to prevent the Throttle from contacting the Switch box, and the Ring does not need to be attached. (It is possible to put it on by making a cut in one place, but I don't think it makes sense.)
So only Seat is used.
The result is so good! I feel sick every time I twist Axel. (Compliment)
However, there is also Demerit, and after a few twists and turns, Seat's
Konnichiwa!
I may hang on to the installation as I do so ….
View detail
I need to buy two
Quality and texture information The paint finish is clean and good It certainly looks good on the sense of use Product to Buy Together Product # BCM-10 Installation difficulty easy Perfect for cost performance and comparison monkey 125 WeBike packaging is always great, arriving in a week for delivery and packaging Advice Since the screw is in the forward direction, it should be installed after checking carefully If you install it incorrectly, the screw line may be disrupted and the package configuration is composed of one, so please buy two and save time and money Many people buy only one View detail
This is a good one!
I bought it because the one I had on two years ago was getting ragged.
I used to put it on with a Gas burner to burn it at a distance, but I still prefer Heat gun.
Dryer would have to be very powerful to make it work.
I use it to prevent deterioration of the Grip heater from UV rays and to reduce vibration of the Handlebar.
When I ride my Motorcycle in the middle of winter, I use light gloves because I am a Grich + Cover.
Even in that case, many are more than warm enough to both protect and warm the grich!
View detail
If you want to use only Course
When I was riding KLX230R on Course, the Rubber at the base of the Handlebar was inevitably distorted when I fell over, and the Handlebar position became wrong.
Instead of the OEM Rubber, an Aluminum conical collar is inserted and rigidly fixed so that the Handlebar will not be misaligned when tipped over.
Instead, there is no rubber, so vibration and shock will be Direct. It is a question of whether or not to replace it for touring on public roads, but it is OK if it is considered to be for course use only.
View detail
Fairly easy to see.
[How is it used?
Used to improve visibility of VTR250OEMMirror.
Was the one you received as per Image?
As per Image
Was the installation difficult?
The angle adjustment was troublesome, but not difficult.
How was your experience with it?
Moving the Mirror forward has improved visibility considerably!
[Was there anything that disappointed you?
None in particular
[Opinions and requests to Manufacturer
It looks wild.
I would like to see a Mirror that can be placed further forward than the OEM without this.
View detail
![[Optional Parts] Lever Guard Spacer](https://img.webike-cdn.net/catalogue/images/21889/spacer1_TS.jpg)
For LeverSpace adjustment
Brake and clutch lever are inside the bar end.
OUTEXLever Guard is not a problem if you have
It will be attached directly to the Handlebar End, so it will be attached to the Bar End a little bit.
I wish there was a color setting since the Spacer is Silver on the ground.
View detail
That's the exclusive product
I bought this for a Holder for my phone exclusively for the SV650X.
It's a special product, and it comes with a firmly!
The Installation Instruction Manual says to remove the Master Cylinder, but I was able to install it just by shifting it slightly.
Neck the price is high...
View detail
CB250RHandlebar replacement essentials.
CB250R with HURRICANE's BMConti3 type
I purchased this product for installation.
28.In order to get the OEM of 6Φ to 22.2Φ.
Spacer collar is required.
Mounting is only A little on the outer side of the semicircle
Double-sided tape was applied to fasten the gap.
If you don't do this, you will always be in the Best position.
Color cannot be inserted.
Well, that's because it's mostly hidden.
It is not built to be so Beauty.
If I get the chance, I may replace it with something a little better built.
View detail
Mechanical cruisers
It can be used well enough as a simple cruiser.
However, please note that some motorcycles may interfere with Mirror and not be usable.
I installed it on a Harley, but it interfered with Mirror, so I moved Mirror and installed it.
View detail
cheap
[How is it used?
Mirror is now easier to see.
Was the one you received as per Image?
Yes
Was the installation difficult?
For beginners.
How was your experience with it?
Mirror is now as easy to see as I thought it would be.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy to pull out Pin.
Pulling out the Pin was made easy with this tool! View detail
It's not just about looks.
I thought it was completely custom in appearance, but when I fell down on a forest road, it spun around and prevented me from breaking the lever.
I think it can be used in Motorcycle other than Off-vehicle as a countermeasure against lever breakage of standing fall.
View detail
Almost satisfied
[How is it used?
When you want to rest your Right hand on the highway
Was the one you received as per Image?
Image itself
How was your experience with it?
Expected
[Points to note]
nothing special
How did it compare to other products?
do not know
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Bling look
I purchased this for my 2014 Honda 450 R and took me less than 2 minutes to install...worth it and looks great.Perfect bang for the buck to provide that bling look to your bike. View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It exchanged together with exchange of a clutch wire. Adjustment was felt easy that it is easy to carry out a pure twist time.
It exchanged together with exchange of a clutch wire.
Adjustment was felt easy that it is easy to carry out a pure twist time.
View detail