Reviews
The quality of modeling is rather good.
Material:Plastic and relatively well formed, there was no BALIetc.
Female thread side has embedded Nut for secure installation.
Well, it's still a bit expensive there, so I hope it's a bit cheaper.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250, KAWASAKI Ninja 250R
Used for 250DUKE
It is sold for NINJA2 Helmet50, so I bought it for use on 250DUKE at my own risk.
When replacing, there was some interference with the Handlebar Clamp, it was hard, and the Socket size of 22mm and 24mm were required.
View detail
If it is a bit cheaper
It is a must have product to replace a different handlebar diameter, but a lower price tag would be better.
Also, if you could include a thin double-sided tape, it would make positioning easier.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA CB250R
Bolts are ….
The quality is fine, but how much better it would have been if the Bolts were Black!
I was so focused on the features that I didn't pay attention to the coloring, which I thought was a mistake.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA CB250R
Convenient for attaching attachments
We are using it to install a clock and HandyGPS on a CT110 HUNTER CUB.
Good machining accuracy and painting, and easy assembly.
When assembling, we recommend applying low-strength liquid screw lock to prevent screw loosening.
View detail
Looks Refreshing
I bought this product because it is a Bar end mirror vehicle and I wanted to make it look as Refreshing as possible.
Master Cylinder Cup is replaced by another manufacturer's Bracket.
I am satisfied with the quality and precision of the product, but I feel that the price is a little high for a single small replacement part.
View detail
Off-set Holder 45 was better.
[How is it used?
Used to improve visibility of VTR250OEMMirror.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Angle adjustment is troublesome, but not difficult.
How was your experience with it?
Off-set Holder 45 was also purchased and compared.
It works well at 30, but 45 was better.
[Was there anything that disappointed you?
None in particular
[Opinions and requests to Manufacturer
It looks a little wild.
I would like a Mirror that can be placed forward without this.
View detail
Compatibility with Windshield
https://www.webike.net/sd/21402188/
I managed to put it on with the LE-13Windshield from Asahi Windshield.
However, the dimensions are limited, and the mounting direction is limited to backward.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
processing
Some vehicles do not have long enough bolts, so it is necessary to replace them with longer ones or cut the spacers. View detail
Fits: YAMAHA RZ50, HONDA NSR50, YAMAHA TZR50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NS-1, YAMAHA XJR400, HONDA NSR250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
It purchases by a dress-up grade up.
It purchases by a dress-up grade up. View detail
It was quality.
It was quality. View detail
Shorter than expected
I have a HURRICANE:V Blade Mirror TYPEII on my WR250X.
Rear visibility was fine, but the Mirror was almost directly above my Left hand, and it was hard to get a "Yaaaay! I bought it because the Mirror was almost directly above my left hand, and it was hard to do "Yaaaay!
There are 30 and 45, but I chose the 30, which was a little cheaper, without taking measurements, thinking there would be little difference.
When installed, it is shorter than expected.
I regretted a little that I had not measured properly, but it was a little easier to do so, so I guess that's OK. is a little easier to do now, so I guess it's OK.
Note that Cap is not included.
I have driven about 1000 km on commuting, mountain passes, and highways, and so far there has been no misalignment or rotation.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
HURRICANEHandlebar Holder Spacer T10
I wanted to make the handlebar a little higher, and after much consideration, I found one that could be attached to the STD Handlebar Post and installed it.
I have not done a long distance test drive but would like to do so in the future. We recommend that the tank be removed for installation and that two people work on the tank (the tank may be damaged). (The tank may be damaged.)
View detail
Buy at for Repair
I bought it at for Repair.
Wires are important parts, so please read the instruction manual carefully.
View detail
Repair item for Set Back Holder?
I bought this thinking it was a Spacer for the Bolt of Set Back Holder, but the diameter didn't match and it didn't fit. View detail
Nice try, really nice try……
I bought it to keep my stem area tidy, but it may interfere with some models of sports cars with cowls.
I thought it would be very easy to use for bar handle types like StoFire and NAKED.
Since the Reverse side Nut&Washer is Silver, I bought the Black color separately.
View detail
It's a very ordinary Heat Shrink Tube.
Used to fix a wrap-around Grip heater.
I used to use a common Heat Shrink TubeTube that is also sold at Home center, but I was a little concerned because it was slippery or compatible with Glove.
It's in the product description.
The surface is designed to be non-slip and secure.
I bought this book because I was attracted by a sentence that says
In conclusion, it is the same with Large. Rough operation, if you are not careful, it will slip.
If you don't care about the manufacturer or the pattern, Recommendation is not for you.
I bought a cheap heat gun from Amazon for installation. (It's not that hot) I worked with it, but this product was easier to shrink and I had the impression that it was less loose when I heated it up again using the Grip heater.
Overall, I don't recommend it, but I think it can differentiate itself from other users who use Heat Shrink Tube. The price is a little bit high.
View detail
it is normal
It is a small part, but it is helpful to have Lineup.
The difficulty of the exchange was low and it took a short time.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Simple and good.
I bought it because I thought it would be easy and simple to put on afterwards.
The edge where it meets the Handlebar is not beveled.
If the Handlebar is attached to a part that has a slight bend in its shape, the painted surface will be scratched.
I think the material is Duralumin, please pay attention to the tightness of the screw.
The mounting holes for the attachment bar are long holes, so you can't expect the rigidity you need for off-road driving.
If you put your weight on the Handlebar while standing, it will move slightly.
I also raised a Review of the Attachment Bar, and it was strong enough to hold up to a windshield.
It's a 125cc, so it will be checked up to 60km.
View detail
Fits: HONDA NC750X, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Note the dimensions
I wanted to add a windshield, so I replaced it with a MINITrail Cross Bar.
The shaft length you select when ordering is the length between the shaft holes.
The product is sturdy and simple, but I would like you to make it easy to understand.
I bought the 200mm, made a mistake, and bought the 250mm again.
In addition, with a nominal length of 250mm, the thickness of the φ22.2 part is 200mm.
I used their Clamp set for Attachment Cross Bar to attach it.
Even with the windshield, there were no strength issues.
It`s a 125 so I`ve only tried it up to 60km/h.
It comes in many colors and is easy to match with Motorcycle.
View detail