Reviews
Fits: HONDA MONKEY [MONKEY]., HONDA DAX [Dax]., HONDA MONKEY [MONKEY]., HONDA DAX [Dax].
OEM as is
I had given up on parts because it's an old motorcycle, but I didn't realize how good they were. I'm very impressed, I'm disappointed when the Screw is rusty, but I feel good when it's Beauty. View detail
Fits: KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
Easy to prevent fatigue
It was used in BALIUS?
I chose silver anodized color to make it inconspicuous when installed on the OEM Handlebar Post.
Bolt and Harnesses were easy to install.
After running the car, it is only 10mm up, but because I am a small person, it is certainly easy for me and saved me from long distance touring.
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Cheap and great.
This is a 1/4 size steel ball.
It is used for the Stem bearing (above) of TS125RK and the Stem bearing of KLE250.
The price is about 2/5 of the OEM product. 50 units for 2 units, where it costs 2,500 yen, but it only costs 1,000 yen.
It's a quality product.
View detail
Was it a good buy?
I was replacing the Mirror, but the Mirror was a little low, so I was looking for something better.
I found this product and researched it, and it's a good height and distance from the Lever, so I bought it.
I'm glad I bought it
View detail
Used for free rides!
I bought it because my free ride hand guard of KTM, which I enjoy off-road, was broken. It has a high degree of freedom and I was able to install the Hand guard of other brands. I'm happy with the way it's fixed and secure. View detail
It can be easy.
You can take your hands off the Right hand on the highway, even if only temporarily.
Depending on the slope of the road surface, it's difficult to adjust the speed, either too much or not enough.
It is useful for continuous highway driving in vehicles that do not have a cruise control.
View detail
Good product
In the C125, you had to shift your body to see the rear.
Installing this product made it easier to see.
Speed of delivery, packaging and responsiveness are very good.
View detail
Various mounting options for Handlebar/Handlebar Brace
The JA55 CT125CT110 HUNTER CUB has a generator output of 190W to match its engine displacement volume, so you can't increase the attachment of the electrical system too much.
But DriveRecorder is the first priority, so I installed a Chinese DriveRecorder
I installed this Bracket on the Handlebar Brace, which is easy to check while driving because it is a main unit with monitor.
It seems to have been stuck on reasonably firmly though it was only stuck on with 3M Strong Double-sided Tape
It is impossible to make a hole with Drill because there is no space in the back side, though it is sufficient if it is not so heavy.
It's not a bad product if you use it as not a bracket to install more than a small object.
View detail
Very good
Our Motorcyclec125 had poor rearward visibility, which has been improved.
There are two different colors and the accuracy of the product is fine.
Installation is easy.
View detail
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
The quality of the Handlebar area will be increased.
It's another tiny part, but it's attached to the handlebar, so it's not a big deal for the whole ride. Visibility. So, although the OEM Product's iron + Chromate treated parts perform a function It is not beautiful. At worst, it can rust.
Mr. SPTakegawa was really good at reaching out to such an itchy spot. Parts. It's not specific to Grom, but it can be used for most Large motorcycles. It is a Universal Product. Of course, you can't use this product with Hydraulic Clutch. There is a combination of fancy blue and red anodized color. Unfortunately, Gold is not available, so I chose the safe Black. Of course, the processing is beautiful, and the installation is easy to install by simply pulling out the OEM Product and replacing it. It's easy (you have to remove the Clutch lever). The logo of SP TAKEGAWA in small letters is also a nice touch! It is.
The diameter is a bit larger than the OEM, so it's very easy to adjust. It's a bit larger than the OEM, so it's easier to adjust. The only problem is that the Material:Be careful not to screw the screw thread in a strange way because it is aluminum. Don't forget that AluminumScrew is soft.
Now that that silver-colored Screw that is always in your line of sight is gone, you can soak up the feeling of something better. It's a small thing, but when you change these things hanghang, the atmosphere is Large. It's a small thing, but when you change these things hanghang, the atmosphere is Large It will change.
View detail
I bought it in preparation for Trouble
I bought it in case I had a WireTrouble on the road
I haven't had a chance to go out yet, but I feel comfortable just having it
It's inexpensive, so it's Recommendation
View detail
It's good enough to use as repair parts
I bought it for maintenance
It can be used fully as an OEM product
Buying an OEM Product is expensive
I am happy with this one as it is very inexpensive
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
It's good enough to use as repair parts
I purchased this for Throttle Cablefor Replacement
It can be used for the same as the OEM Product, etc
There's no need to go to the trouble of buying an OEM Product
I was satisfied
View detail
Increases the Universality of Mounting Parts
hand protection like the recent Cruiser and RALLY50 cars, as well as long hours of use I installed it to make Riding comfortable
When I tried to install my ZETAHand guard, I applied it to the Radial I installed it because I can't install both Brake and Clutch due to the harm of installing master
The Bar End was installed with a slight twist, which bothered me a little I put it on to avoid Harness interference and got an acceptable angle! 。
View detail
TANAX Off-set Holder 45
The quality is very excellent. The excellent appearance of the product is given by the excellent quality of a smooth and mirrored chrome finish. Before installing these mirror expanders, I had simple black mirror expanders, the appearance was not very impressive. After installing the chrome expanders, the appearance has changed, it looks very elegant. The bolts could be used 5mm longer, as I have the hand guard, these are a little short. After installation, the view from the back is much better. Very satisfied. The quality is very excellent. The excellent appearance of the product gives the excellent quality of a smooth and mirror chrome finish. Before installing these mirror expanders, I had simple black mirror expanders, the appearance was not very impressive. After installing the chrome extenders, the appearance changed, it looks very elegant. The bolts could be applied 5mm longer, since I have a guyra hand protection, these are a little short. After installation, the rear view is much better. Very satisfied. translated by google translate View detail
Fits: Others , HONDA MONKEY125, HONDA CL250, YAMAHA XSR125
SP TAKEGAWA Fat Type Cable Adjuster - Monkey 125
This Takegawa cable adjuster is a beautifully finished item unlike the cheap OEM one. Always love how they include a sticker with all there items. View detail
A must-have when changing your Grip
I use it every time I change the Throttle or Grip on Off cars
Installation in CYGNUS this time
Normally, the Throttle tube is grease on the Throttle tube and the slip of the Handlebar and Tube I'm doing a good job of
Grease degrades with rain and sand If this becomes too much, the Throttle can become heavy and difficult to return to
Off cars and other vehicles that run Dirt or have a lot of tipping will be affected morosely
I wish I could do maintenance on it, but it's better than maintenance I prefer to ride it and I want to ride it as maintenance-free as possible
Because this Teflon sheet has good slipperiness even without using Grease, etc It won't emulsify with moisture or call for dust like Grease Nope So basically, you can use it until your Grip is ruined
I think it's a hidden gem
View detail
Very good
Used on a millibarized Harley Aluminum Handlebar
Before the installation of this Handlebar Weight Does it really work? I was skeptical that the vibration of the Handlebar was too much by the harm of customizing Harley It became painful to hold the Handlebar after more than 3,000 rpm So I bought this reputable Weight, which I'm clutching at straws
It's very easy to install and it takes less than 10 minutes to replace both Sides
The result is a surprisingly low vibration I wish I'd used it sooner! I thought
View detail
I am satisfied
It's also called "Look Up", but I have a habit of gripping the inside of the Grip Pads The skin of my thumb is protected by the Grip Pads, and it has never been removed since I've used the Grip Pads There are no tears View detail
Behind-the-scenes, but the lead in the shadows?
Originally a part in a tiger car, but it does a good job on On and Off, on public roads and Closed They give you
There are similar imported manufacturer's products in the off series, but if you think about it in a practical sense, you'll be able to use them I know, but this is the best!
The only minus point is that I wish they would sell it with coloring that is a bit more in line with current times
View detail