Reviews
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
for Replacement
It's a good product with a lot of Color variations and reasonable price.
It's also easy to adjust, though once you do, there's no touching it.
If you have several kinds of different colors, you can use it in combination with your favorite. If you notice, the fourth one.
View detail
Paint is weak
It's been about 5 years since I installed it. I keep it indoors and don't ride it in the rain, but aluminum rust has started to appear.
The paint is weak.
They don't seem to be doing any kind of Anodized or Plating.
This is a part to shift the Mirror to the side to increase the viewing area, so it is fully functional, rigid and good.
I need to use Sandpaper to remove the rust and paint it.
View detail
I want one of them to be 22mm inside diameter.
Normally used for Size adjustment, Material:It's Rubber so it's not noticeable.
The Clutch Side goes through a Handlebar diameter of 22mm, so one side should have an inner diameter of 22mm.
It is Just size for Throttle pipe.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
It's enough to install Smartphone Holder!
I bought this because I only wanted to install the Smartphone Holder.
NINJA1000sx, originally there are various equipment as standard, because the retrofit is a Smartphone Holder, this Size is enough, but I think that it was even better if there is a lid of Capetc. on the tip if possible.
View detail
Fits: KAWASAKI BALIUS2, SUZUKI GSX250FX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100
Good for fine tuning the Handle position.
The product name is "Handle holder spacer", but it is not famous and I couldn't find it on the web.
Webi doesn't come up unless you type in the product name. ・・・・
I was able to find it in a jungle where I could also find related products, so I just snapped it up, and I'm sorry I didn't buy it here.
I installed it on my Posh face Super Motorcycle Position Bracket, and it fit the Cinderella so well that I thought it was made at the same factory.
The adjustment fee is only 10mm, but this 10mm will expand the custom range around the Handlebar.
I used it myself to avoid interference.
If you are using the Handlebar Holder, you may want to use it to fine tune the position.
View detail
Attachment expansion
I purchased this product for my USB power supply and Smartphone Holder installation.
Even when used in conjunction with the GSX250R standard Handlebar Spacer removal, there was no interference with the FFork.
If you have removed the Spacer, you can install it with the OEM Bolt as the supplied Bolt is too long.
Nut under the Top Bridge has a loosening stopper, so you might want to be careful when removing it.
View detail
Easy to take off. Convenient Items.
It is easy to install. At the time of installation, there is also the impression that it disassembled and removed SpeedometerCase with difficulty because Bolt does not enter Holder of the front side if SpeedometerCase is not removed, but there is no need for it.
Remove the OEM Upper Holder and assemble the Multi Purpose Bar, Bolt, Spacer and Upper Holder before installing. (If you try to install it without assembling, the Bolt will not fit because the Speedometer Case is in the way. Screw hole position is also Exactly.
Pipe diameter is Φ22.2, same size as Handlebar Pipe diameter, I think it is convenient to install Hook, Carabiner and various holders. The rigidity is high and it looks like OEM parts.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI NINJA1000R [Ninja]., KAWASAKI Ninja 1000SX
Just like that!
The installation was very easy, and although some reviews say that the original Handlebar bolt was too hard, it came off without difficulty and the installation was completed in about 2 minutes.
I installed the Quad Lock Smartphone Holder and I am satisfied that it works as Image without any problems at all.
However, the point of concern is that it is hollow, so if water accumulates on the inside, is it Large strong?
Nevertheless, it's easy and a good product that serves its purpose.
View detail
For visibility.
Because the body is Large threshold, in OEM position
All I could see was his arm, and I thought it was dangerous.
I bought it instantly.
Good visibility after installation.
I need a hexagon for installation.
It was not included and had to be purchased separately.
The texture is very good, but
It's a little pricey.
View detail
Ideas product!
It is an Analog type Cruise Control.
So easy to install!
I wouldn't use it for city driving, but it works great on the highway!
View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Used to make up the shortfall
When I replaced the Stem for KMX200 in KMX125 which I bought in Yahoo!
For some reason, I didn't have enough steel balls for Stem bearing, so I checked the size from Parts List and bought them.
So far I have no complaints about the sphericity or hardness.
If you have a Kawasaki, you can check the size of the Stem sphere from the Parts List.
View detail
You can use this.
In the case of XSR700, because the brace cannot be installed in the OEMHandlebar due to the position of the meter
I bought this Clamp Bar.
Now the Navigation is in place.
It's not the product's fault, but it's just a pain in the ass to insert and remove the keys.
It's even harder to do. (We knew that...)
View detail
Fits: YAMAHA TZR50, HONDA NSR250, YAMAHA XJR400, YAMAHA RZ50, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, HONDA NSR50, HONDA CB400SF, HONDA NS-1
exchange
In NORMAL, it is an exchange because it is a small piece of work and dirt was noticeable.
Large size, easy to turn around.
Gold, I thought it was a mistake in terms of color, and I would change to another color the next time I buy it.
View detail
OffMotorcycle blister prevention.
Of course, my arms go up in the air as I grip the Grip for hours at off-road races, but of course, my arms go up in the air … (crying) The base of my thumbs gets rubbed and the skin peels off (sweat)...just me?
I installed it as a precautionary measure (easy framing).
The color is, well, aside from the color, I think it's functional enough, the thickness is there? Not much? I think it's normal. I think it's somewhat blister-proof.
View detail
I installed it, but ……sorry?
Easy to install
However, I installed it on MT09, but it interfered with the Cell and the Engine cannot run.
When I installed it by shifting it, it would be out of the purpose to begin with, so I gave up and removed it and decided to change the Mirror itself.
View detail
Good vibes
I bought it to install my Smartphone Holder. The thickness of the board allows for a very secure installation. View detail
Handlebar Mount Bracket
This is a carbon-exclusive design, so you will be able to install this product without any discomfort.
It is useful for installing a USB power supply, smartphone (Navigation) or SENA's REMOTE CONTROLLER.
There is a Multi Holder for the CBR400R available from DAYTONA, and with a little bit of work, you can install it on the CBR650R as well, but it didn't look as chicty as it should have.
The KIJIMA KIJIMA Handlebar Mount Bracket is designed for the CBR650R so it won't interfere with the meter's visibility or interfere with the cowl.
View detail
I had no trouble installing it.
Installation of Ninja250Rni. When Mount is attached, it is not the degree which becomes matter of concern, although it diverges and is connected from Wiring of Tail lamp, and it mounted in the place of Mirror. View detail
Fits: その他
Color change
I ordered Repair Parts to change the color of my car. It's very easy to makeover as it's very cheap and easy to replace. View detail
Improved rigidity
I changed Stem to ZETA, but I bought the highest size because it is said that the height of Handlebar can be changed, too. I haven't changed yet, but when I ride the small size MXMotorcycle with both kids and large people, it is very helpful to have such a product. View detail