Reviews
To improve Position
Replaced OEMHandlebar as it was too wide and tiring, width is just right.
The height is between OEM and Cafe, which is good for sports driving, but a little more height is needed for long touring.
The cables are fine as they are, but there are a few left over, so I replaced them with cafe cables and throttle holders.
The mirror was also replaced with a CAFE one because the narrower handlebar made it feel like it was popping out more.
Because of the narrower width, the car will not pass inspection without the separately sold Spacer, but it is possible to change the structure by paying 5,000 yen at Plaza, so if you do not plan to return the car, it would be better to change the structure.
View detail
YAMAHA BOLT Shoulder Bag (ABS made of 2022) Used in
The angle is more gentle than the Robot Handlebar made by ALCAN hands that was previously used, and even if it is tilted forward, the angle of the wrist does not become tight, so there is more freedom of adjustment, and the position feels easier here.
The brake hose is a HURRICANE brake hose joint. (20cm) If it had been 15 cm, it would have stuck out.
View detail
Replaced for position change
Replaced because I wanted to lower the position a little from NORMAL.
I used Meter relocation bars from Mukawa and removed the Stubby because it got in the way during installation.
View detail
Fits: HONDA CB400SS, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX, KAWASAKI BALIUS, KAWASAKI BALIUS2, SUZUKI RV200 VANVAN, SUZUKI ST250, SUZUKI ST250 E Type, SUZUKI GSX400
Good.
Condor, Swallow, and Separate handle, in that order.
I'm afraid it's going to be hard to get on.
Swallow's Position is not that tight.
No, it is not. Just not at too much of an angle.
For fine-tuning because of contact with Tank
It takes a lot of care.
We checked with Mr. Manufacturer and found that for the past 1.2 years
The component material itself is not stable, he said.
I think the delivery time will be quite long.
It took me almost a year.
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA FTR223, HONDA FTR223, HONDA NC700S, HONDA VTR250, HONDA APE 100, HONDA APE 50, HONDA APE 50, HONDA HORNET250, HONDA MONKEY, HONDA MONKEY, KAWASAKI 250TR, KAWASAKI W400, KAWASAKI W800, KAWASAKI ZRX1100, KAWASAKI ZRX1100II
Speaking of Cafe racer
Speaking of Cafe, the original
Separate handle, Swallow, and Condor.
I think, but of those three, if you don't reverse-engineer it.
I think the first Position is the easiest.
However, when I installed it, I was surprised.
It looks like it's angled properly, so...
It is moderately Recommendation.
For the last 1.2 years, according to Manufacturer, the parts
The ingredients themselves are not stable, he said.
I think it will take much longer in terms of delivery time.
View detail
easy to ride
It is recommended for people who are quite Handlebar Up Type and have difficulty leaning forward, etc.
However, the handlebar is unexpectedly narrowed down, so there may be some differences in taste.
View detail
The pull is quite Large.
This is a very well-made handlebar with beautiful plating.
The Narrow Trucker Bar was a TRACKER-like Position Image.
I used it on a TW200, but it was squeezed to make it Narrow and the position is much more drawn forward.
If that is your preference, it is fine, but if you are too pulled in by the name TRACKER, the Image may be a little different.
I am 180cm tall and when I held Handlebar, I felt like I was standing upright.
It is suitable for those who like to ride Style sitting on the street.
View detail
Can be mounted on WR155
[How is it used?
Available for WR155 Handlebar.
OEM is low, so anything taller than this item may be tough.
Also, this Handlebar is too low, making it difficult to close the Bolt on the Clamp.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Drilling is required to replace the handlebar.
How was your experience with it?
It is a good aperture.
[Included Parts:were they on?
It came with a set of bar pad.
Bar end caps were included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Position is good
This product, which is squeezed with The Same Shape as OEM, improves the HandlebarFeel, which makes the OEM's shoulders stick out.
However, if you have a BEET Handlebar or something like that in front of it, the Large body may use the EFFEX Handlebar weight. However, this Handlebar cannot be used with EFFEX. You have to use a short bar weight. I was not aware of this and ended up having to cut a tap on the inner parts of the handlebar weight and add an OEM handlebar end.
View detail
Fits: SUZUKI GSX400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX
Lightweight and corrosion resistant
The handlebar was corroded so badly that I replaced it with a POSH Super Motorcycle Bar. I was surprised at the weight difference between the OEM handlebar and the Super Motorcycle Bar, even though it looks exactly the same. I painted the DAYTONA aluminum stabilizer, top bridge, brake caliper, and disc center gold to give it a fake KATANA look. View detail
I think it's good
Low Handlebar makes it easier to attack even in Naked.
Scratches rust because it is Steel, not Aluminum
View detail
For men.
Handlebar for the 1st pc replaced from OEM. it was introduced in SEROW Women's Custom, so I changed it, but it was too far for me with short Reach because of less pull. So I cut Both Sides 2cm and installed it. It may be good for tall women with long arms, but it may not be suitable for Small patterned people. View detail
Compact Position
There are few options for Taper Handlebar that can be used for On roadMachine, and I used it for the second replacement, which I tried to replace with a shorter Handlebar in stages.
As a result of replacing this Handlebar, which has a narrower overall width and a higher overall height value, it looks quite good as a Position.
A little less aperture would be nice, but unlike Separate Handlebars, the Pipe Handlebar does not have an adjustable aperture. You just have to get used to it.
You may or may not like this glossy product because of the way it looks. For me, I preferred the matte one. The quality is rated 3, but the finish is well done and no problems at all. I just would have preferred matte. Too bad there is no choice.
This is the best choice for those who want to focus on small, compact cars, and it is a position that makes it easy to feel as if you are controlling a motorcycle.
View detail
No problem.
The finish and shape of the handlebar is perfectly fine.
The rest will be whether the Position is to your liking or not.
Currently, I am using this handlebar in combination with a HURRICANE Set Back Spacer that is offset in the forward direction.
My personal impression is that the handlebar position is still a bit close to the handlebar position, even with this combination.
But I am glad to have more options.
View detail
easy to ride
It is a very comfortable and safe Position for people with back pain. View detail
Style is good.
I referred to Net's impressions before purchasing. It did not interfere with the Tank as most people wrote. I asked a motorcycle shop to install it because I was not confident in the handling of the Cable and Hose. There were no problems, and I am generally satisfied with the product. However, the Touring model is more stressful on my wrist than the OEMPosition model. I guess it is to be expected. It is a coincidence that the Curve and Front brakes master of CHIC DESIGN's Bikini cowl are perfectly aligned. View detail
Increased mobility
Purchased to improve the tightness of the riding posture.
Although you will be leaning forward, you will feel a sense of oneness with the motorcycle, and you will get a sense of being in control. However, it may cause neck and shoulder pain.
View detail
Change to Separate handle style position
The gsr750 has a unique tank shape, so the handlebar selection is quite large…
I wanted to use a Pipe Handlebar with a tighter aperture and a lower profile.
It still interferes with the full lock.
I thought about Swallow or Condor.
I didn't like the design and texture a bit.
I was looking for something.
DAYTONARoadSteering found!
With Aluminum Cut-outs
Rugged and Cool?
That's why I bought it.?
I installed it as soon as I could.
Brake hose hits Meter…
Accelerator Wire is also a bit tight…
For now, we have responded with Handlebar riser.
Also, if you turn it over or move it up or down in the fixed position, it's subtle.
Position adjustment is also possible.
I think it is a well-made product.
I put it on and ran a test run.
It's not as tight as the SS, but it's a reasonable front load and doesn't sacrifice street driving that much, but it's not as hard as the SS.
Pleasant turns on the pass.
I think it turned out to be a pretty good Handling.
It may be more straightforward than NORMAL.
In the case of gsr750, if you change the brake hose routing
I can make more adjustments, so I'll try again.
View detail
Fits: HONDA VTR250, SUZUKI SV650, YAMAHA MT-07
The shape I wanted.
Pipe Handlebars come in a variety of shapes and sizes from various manufacturers.
The EFFEX EFFEX Super Bar Superbike was Exactly in the shape I wanted.
This series has a line up of unusual shapes, so you may be able to find a shape you haven't seen before.
However, the manufacturer's website says it will be discontinued when it is no longer in stock.
Recommendations for early purchase.
View detail
Fits: YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900
I was able to buy it at a discount.
As other users have mentioned in their impressions, there is a possibility of thumb damage when fully locked.
I also eliminated the problem by biting the Washer into the Handlebar Post to bulk it up.
Since the handlebar is lowered, the clutch cable and brake hose must also be reworked.
Position-wise, it will look good, but it will be a little heavier since it will be made of steel instead of aluminum handlebar.
In my case, I was able to buy it at a reasonable price, so it's a great cosmetic product!
View detail