Reviews
It was easy to install.
I didn't have a problem with it.
It would have been nice to have some sort of instruction manual.
It was so easy that I forgot to take pictures!
Prahan or Rubberhan is easier to work with.
I think it is better to wet the parts with Parts cleaner than silicon spray before insertion.
View detail
Used to install external grips on af09.
[How is it used?
Used to install external grips on af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
Easy
How was your experience with it?
Made by HURRICANE for safety and security.
It looks Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used to attach external grips to af09.
[How is it used?
Used to attach external grips to af09.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It is easy even for beginners as all you have to do is put it in the handlebar and turn the hexagon.
How was your experience with it?
Made by HURRICANE for safety and security, Simple and cool.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Knurl process is working.
Although the difference is very slight, the Knurl finish gives the product a much more luxurious texture and feel. View detail
Expected
Length can be adjusted in combination with Weight. Car inspection OK. View detail
No more vibration.
Installed when changing Handlebar. It is good because the vibration is gone. View detail
Handlebar width adjustment.
Added to HURRICANE SSC Side cap.
Extension Block.
One extension is 10mm.
I am using two of them connected together, but because of their convex shape, there is no wobble once the bolt is tightened, and I am not particularly worried about it.
It may need to be retightened over time, though.
The Handlebar width, which felt tight, was widened to allow for an easier ride.
View detail
For adjusting handlebar width.
The vehicle used is a motorized Scooter.
I want to put an ACTIVEHigh throttle on this thing too!
This is where it all started.
The OEM is an old-fashioned Scooter, so the throttle body is in a HandlebarCowl, the grip is Non-Penetrating 115mm, ← so it's a Quantity.:Pair (for Left and Right) The Handlebar length is also different in
Welding extension or Cutting Handlebar is also a hassle.
Originally, there was a feeling of tightness in the width between Grips, so I took the plunge and used the Quantity:Pair (for Left and Right) Both are to be extended.
I have been looking for. I wondered if there was anything I could do ….
… about a month (laughs).
There it is. It's HURRICANE. It's a great place to get an itch.
High throttle body has 120mmGrip outside Cowl.
Extension of just over 25mm approx.
The bar end section is simple, not too conspicuous, and very stylish. It is perfect for my taste.
Fine-tuning with Extension Block and Washer, Quantity:Pair (for Left and Right) They can be aligned.
I think Large sturdy in terms of strength … maybe.
Well, we managed (laughs).
It really is easier to ride.
View detail
Good and reasonable price
Looks good and minimal. Nice quality also. Also good to use with other weight system combined. Maybe using this for ohter bikes too View detail
HURRICANESSCHeavy weight bar end
My previous Bar End was rusting out, so I installed this one as a trial.
The size is Exactly here for gixxers with a Handlebar inner diameter of 18mm.
At 362 g per unit, they are about twice as heavy as the Bar End we used to use, and the vibration seemed to be much less.
I quite liked the Simple look and OEM-like appearance.
It seems that the weight can be increased with additional Option Parts, so it is good to be able to change the weight to suit your preference.
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI Estrella Custom, SUZUKI GSX250FX, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA
Utilized for NSR50
I used it on the Bar End of a Φ22mm Made by HURRICANEHandlebar. It is a very important part because it will be a guard in case of tipping over. It is inexpensive and easy to replace. View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZR-7/S, SUZUKI GSX1400, YAMAHA YZF-R1, HONDA PCX125, KAWASAKI Estrella Custom, HONDA CB1300 SF, HONDA CB750, HONDA PCX150, HONDA VFR400R, HONDA SILVER WING400, HONDA SILVER WING600, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF06), HONDA FORZA(MF06), HONDA FORZA(MF08), YAMAHA FZ400
Happy with the look and feel
I installed it on my Retro Motorcycle.
The texture is good and Simple.
View detail
To secure the space in the Handlebar
After I made a separate MASTER, the Bolt of Brake hose was interfering with the Meter a lot, so I introduced it.
It is said that it can be extended to the largest 25mm, but if it does so, the Bar End part becomes short and Parenthesis is bad, so I stopped at 20mm.
As you can see from the arrows, there is now a little more room. (The first one is BEFORE, the second one is AFTER)
However, it was very difficult to adjust the riding position because the position of Switchetc. is also gap.
It is a pity that Bar End cannot be changed to other things.
View detail
Grom JC61 '15
Used for groms
I installed it on a HURRICANE Forward Conti model 2.
Personally, it's become a staple for me, but with Grom, I'm not sure if I need the extra Weight yet!
APE 100, and I added Weight.
View detail
APE 100
Used for APE 100
Used in HURRICANE Flat0 type
With APE, you don't need Weight, etc., so I was confused with shell Type, etc.
I bought this one without Weight just for looks.
Very cool.
View detail
Good functional and understated appearance.
I installed it on my ZrX1100. the Handlebar is a Hurricane European1 Steel. The handlebar is a Hurricane European1 Steel with an inside diameter of 18-19mm, Exactly.
It's very easy to install, just tighten the bolt and it's very secure. I have ridden a few hundred kilometers and have not had any gaps or looseness, but I think you will need to retighten it from time to time as it is fixed using rubber elasticity. (I have no worries at all about the fixation.) It can be fixed firmly and should work as expected in case of an emergency (standing injury or light fall).
The Handlebar area is in Black, and I like the understated look of it.
My only complaint is that the Slider section is not sold as a Single Item. This means you can't repair it. Please sell the Slider part as a Single Item as soon as possible.
View detail
To change the color of your commuter Scooter.
HURRICANE's Handlebar Set essentials.Refreshing Design.Not extravagant and calm. Anodized in an inconspicuous place. View detail
Easy installation No discomfort
HURRICANEHandlebar Touring?Mold and Quantity:Pair exchanged
I purchased it at We-Big as they said they could not use the OEM end
View detail
Fits: YAMAHA DRAGSTAR1100Classic, YAMAHA DRAGSTAR1100, KAWASAKI VULCAN800, KAWASAKI VULCAN400, KAWASAKI ELIMINATOR 250V
Best Match!
The diameter of the Handlebar on my motorcycle is 1 inch I was looking for a Bar End to fit the 1 inch diameter Handlebar replacement
I bought the HURRICANE American Grip end because it fits the 1 inch diameter
I am satisfied with both the weight and the quality of the product
View detail
Tightly fixed with METAL lock
I was using it with some wobble, but this time I tried to glue it with METAL LOCK.
The result was a stiff fix.
Not the slightest movement.
If you are concerned about some wobble, you may want to try fixing it with METAL LOCK once if you are considering buying a new one, although it cannot be removed once glued.
View detail