Reviews
It attached to the CB1300SF 07 model of HONDA. the Easy fitting bar (an Aluminum -- it is not -- the direction of iron) which carried out simultaneous purchase -- although purchase of was done at business -- the accuracy of a situation plug Handl
It attached to the CB1300SF 07 model of HONDA.
the Easy fitting bar (an Aluminum -- it is not -- the direction of iron) which carried out
simultaneous purchase -- although
purchase of was done at business -- the accuracy of a situation plug Handlebar --
-- since it was bad (the BALI remained in inside), attachment was dramatically difficult.
Since it is a Handlebar and the
Set, I would like to carry out へん about there perfectly, although the
bar Weight itself was improved by mono-はとて.
Although he wanted to use *5 つ in fact, since attaching took a serious labor and time,
*3 つ was used.
View detail
It attaches with an Aluminum Bar. Bar bores phi14 (Aluminum) and phi19 (Steel) -- it is correspondence to both. Although form was a method of 3 Type ある of the Short, the Middle, and the Long, I chose the Long. An uneasy element is one point, al
It attaches with an Aluminum Bar.
Bar bores phi14 (Aluminum) and phi19 (Steel) -- it is correspondence to both.
Although
form was a method of 3 Type ある of the Short, the Middle, and the Long, I chose the Long.
An uneasy element is one point, although the
Color variations is also as abundant as six kinds and a simple Design is pleasing.
being related with
attachment -- it is -- although -- although this Bar end is an easy mechanism in which a Rubber portion is crushed, swell by tightening a Bolt, and it is fixed within Bar, this fixed condition feels that he is a little uncertain for it.
If the lump of such a metal (Aluminum) separates and flies during the
run, it is a super-danger electrical!
Since it is individually worrisome, I would like to think that it is satisfactory, since it fastened tightly, but to carry out an increase bundle occasionally.
View detail
Fits: HONDA CBR1000RR, HONDA CBR600RR, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA HORNET600, HONDA HORNET900, HONDA NC700S, HONDA NC700X
From the elegance whose attachment is possible for a Normal handle to selection Form and a color are satisfactory. Compared with the elegance purchased several years ago, the color was thin a little. Since the fixing screw loosened and fell, it is
From the elegance whose attachment is possible for a Normal handle to selection
Form and a color are satisfactory.
Compared with the elegance purchased several years ago, the color was thin a little.
Since the
fixing screw loosened and fell, it is re-purchase.
To attachment, a Screw lock is indispensable.
View detail
It fell over during practice, and since the long screw had bent, it purchased for repair. It uses for one-set repair, and is walking around with one more set for the rainy day.
It fell over during practice, and since the long screw had bent, it purchased for repair.
It uses for
one-set repair, and is walking around with one more set for the rainy day.
View detail
Fits: KAWASAKI ZR-7/S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI Estrella Custom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, SUZUKI GSX250FX, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARSCustom
[Webike Monitor] Appropriation of the Handle cannot be mistaken and attached. it is cautious of the Grip end, and can purchase -- 。
[Webike Monitor] Appropriation of the
Handle cannot be mistaken and attached.
it is cautious of the
Grip end, and can purchase -- 。
View detail
[Webike Monitor] It arrived at NSR MINI. Since it was required of the Mini bike race on the Regulation, it purchased. If it Adheres to neither a function nor appearance since it is quite cheaper than the original manufacturer's
[Webike Monitor] It arrived at
NSR MINI.
Since it was required of the
Mini bike race on the Regulation, it purchased.
If it
Adheres to neither a function nor appearance since it is quite cheaper than the
original manufacturer's product,
pompon exchange can be carried out and it is economical.
View detail
It exchanged simultaneously with a [Webike-monitor] road bar. Since the kana ? price which became somewhat smart since it was exchange from pure black was also handy, it is satisfied.
It exchanged simultaneously with a [Webike-monitor] road bar.
Since the kana ? price which became somewhat smart since it was exchange from pure black was also handy, it is satisfied.
View detail
Although it is a [Webike-monitor] titanium color, it is the impression thin pink ?. Although structure was solid, only one sheet of the teflon in a photograph was attached, and it worried about the use. When the grip by the side of an axel probabl
Although it is a [Webike-monitor] titanium color, it is the impression thin pink ?.
Although structure was solid, only one sheet of the teflon in a photograph was attached, and it worried about the use.
When the grip by the side of an axel probably contacts, probably in order to improve a slide, there should just have been ? explanation writing.
View detail
It was used for the kawasaki Z1. Since it was an air cooled engine rigid mount, vibration was uncanny, but I think whether the half has been reduced with this product. Although change may not feel for some persons, I think the value whereabouts tr
It was used for the kawasaki Z1.
Since it was an air cooled engine rigid mount, vibration was uncanny, but I think whether the half has been reduced with this product.
Although change may not feel for some persons, I think the value whereabouts tried since the amount of money is cheap.
View detail
Since the car-body color was blue, blue was chosen. It is a good accent. An authentic positive one cannot be a reserve and is w.
Since the car-body color was blue, blue was chosen.
It is a good accent.
An authentic positive one cannot be a reserve and is w.
View detail
A 35-mm type was attached to the serow 225, and was seen. Although the clutch side was satisfactory, the throttle side was a type which is not rotated together with a throttle like a 29-mm type, but carries out expansion processing of the hole of a th
A 35-mm type was attached to the serow 225, and was seen.
Although the clutch side was satisfactory, the throttle side was a type which is not rotated together with a throttle like a 29-mm type, but carries out expansion processing of the hole of a throttle tube, is penetrated, and is directly fixed to a handlebar.
If it fastens too much since a stationary portion is a metal touch, a handlebar may swell and a throttle may stop and moving to a smooth.
I think that what was necessary was just to have used a 29-mm type.
View detail
It is the price for the zephyr 750. the dress-up of a handle up -- it considered and purchased. I did not find the change of those other than honest appearance. It is merely large unexpectedly. Color chose gold. If a price is cheap to
It is the price for the zephyr 750.
the dress-up of a handle up -- it considered and purchased.
I did not find the change of those other than honest appearance.
It is merely large unexpectedly.
Color chose gold.
If a price is cheap to a slight degree, does evaluation become high further?
View detail
He thought that he would make bar end heavy in order to suppress vibration of a handle, and it equipped. As a result, surely, vibration decreased and straight line stability also went up it. However, the piece angle of a handle enters freely and h
He thought that he would make bar end heavy in order to suppress vibration of a handle, and it equipped.
As a result, surely, vibration decreased and straight line stability also went up it.
However, the piece angle of a handle enters freely and has become the handling using a nerve dramatically at the corner inlet port or the low-speed corner.
Although he will think that it is satisfactory if a steering damper is attached ... When there was a weight suitable for a machine, it was carried out in the restorative.
View detail
When running a circuit, in preparation for an emergency risk, I think whether the thing of the price of this grade may be sufficient. Although there may not be any bar end, in a direction, it is recommended as it is slightly unsatisfactory.
When running a circuit, in preparation for an emergency risk, I think whether the thing of the price of this grade may be sufficient.
Although there may not be any bar end, in a direction, it is recommended as it is slightly unsatisfactory.
View detail
As a product It is this time, although it is made thinly and is not easy to protrude. Although red was purchased Red has become brown before one year passes. Red is whether it is better to stop...
As a product It is this time, although it is made thinly and is not easy to protrude. Although red was purchased Red has become brown before one year passes. Red is whether it is better to stop... View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX250R, SUZUKI SV650 ABS, SUZUKI GSR250, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI Bergman 400, SUZUKI Gladius 400, SUZUKI Vstrom 250, SUZUKI V-STROAM 17, SUZUKI V-STROAM 17
A price is also common and appearance is also common. However, since there is a choice of a color, it is good to try many things.
A price is also common and appearance is also common.
However, since there is a choice of a color, it is good to try many things.
View detail
Exchange from an authentic positive one was performed. Vehicles are CBR1000RR. As it is also in in play [ of other persons ], it is a little light. There was an one more point problem. In wearing on a right-hand side lever, if it tightens
Exchange from an authentic positive one was performed.
Vehicles are CBR1000RR.
As it is also in in play [ of other persons ], it is a little light.
There was an one more point problem.
In wearing on a right-hand side lever, if it tightens a screw and is crowded to the last, the phenomenon which becomes an axel opening and releasing will generate it.
Since the size of some part does not suit, it is thought that it is because the rubber of a grip has interfered.
Therefore, shaving processing may be needed for a while to such an extent that a screw fastens, and the amount of lumps is adjusted or a rubber does not interfere.
The screw once rebuked me, and I adjusted and attached the amount of lumps.
When there is time, I would like to delete and process it so that a rubber may not interfere.
However, those whom slack of a screw does not worry think that the present state may be sufficient.
Moreover, since I think that it is not a phenomenon which happens by all the vehicles, either, I ask you for a check with the system to the last.
In addition, left-hand side exchange was able to be performed satisfactorily.
View detail
Although it is good, cheap one has only a product made of nylon, and if attached, it is visible [ with it ]. [ very well appropriate for Yasu ] It was also hard to devote oneself.
Although it is good, cheap one has only a product made of nylon, and if attached, it is visible [ with it ]. [ very well appropriate for Yasu ]
It was also hard to devote oneself.
View detail
Although a long distance had not run yet, the effect did not understand the comment with which it equipped only by appearance. Although attachment was easy, since an O ring did not enter, lube was attached just for a moment and put in. I think tha
Although a long distance had not run yet, the effect did not understand the comment with which it equipped only by appearance.
Although attachment was easy, since an O ring did not enter, lube was attached just for a moment and put in.
I think that what is necessary is just to think the dress-up purpose up since a price is also handy.
View detail
It attached to zep750 (a handlebar is an external general-purpose article). It is Uberzeugungserbrechen although I think that it is the bar end for off vehicles (smile). The refreshed design and the simple logo are pleasing. If a bolt is tight
It attached to zep750 (a handlebar is an external general-purpose article).
It is Uberzeugungserbrechen although I think that it is the bar end for off vehicles (smile).
The refreshed design and the simple logo are pleasing.
If a bolt is tightened and it is crowded, a stopper opens and is fixed, but I think that it will break with the metal fatigue if it attaches several times, it removes and it carries out since this portion is a product made from aluminum.
Moreover, if not careful of a bolt in the process in which it is fastened and crowded, a stopper may not open uniformly but a center may shift.
also arranging the direction of a character -- mend -- stinking (smile).
Although many things were written well, since it is the attractive design which are not, I wish to use for a long time.
View detail