Reviews
In truth, it may be royal to ride as Original….
I bought it to change the position. The actual difference is slight (3cm up, 3cm back, width −6cm), but the feeling has changed a lot. It had been half a year since delivery and I was just getting used to the lower position, but now that it is a little higher and in front of me, the pain in my palm from over 50 km has lessened.
I don't think the appearance has changed that much. I originally liked the cafe's style, so I was glad that the design did not change. It's subjective, but ….
I know, but I personally prefer the Matte Black color, which is the same as the OEM, because the color is shiny and shiny paint. (I guess I just don't know about them …)
Note - I purchased a part to widen the width, but it is undeniably ugly, as it would require structural modification.
Incidentally, when we asked the labor charge for bringing in the parts to our neighbor's shop, they told us that it would be 17,600 yen if the clutch wire is replaced (this is a telephone inquiry, so please keep it as a reference). (This is a telephone inquiry, so please keep it as a reference only.) I tried to do it by myself, but it took a long time because I am not used to it. I recommend that amateurs ask a motorcycle shop to do it.
Conclusion - I was accustomed to a low Position, so my impression is that it is just a taste change, but I think it fits the Japan human body type.
View detail
subtle
No quality problems.
I think we have different tastes.
I have the Position set so far forward that it looks a bit Mischief, but this would be closer to my best preference if the Edge angle were just a bit shallower.
The wires are thinner than OEM, so they require additional parts, but only the clutch wire needs to be replaced. The rest was OK with OEM.
View detail
too bad
I was informed that it can be installed with a genuine cable, but for a smooth installation, a 10cm longer clutch and decompression cable is required. View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CB300R, HONDA CB150R
I am satisfied
The OEM Handlebar had a tendency to spread the arms, but this Handlebar is large and strong without spreading them too much. I am satisfied with it. View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
It varies from person to person.
I bought it used.
1:HandlebarBody
2:Long clutch wire
3:Long Accelerator Wire
4:Extension horn harness
5:Stainless Steel Mesh Brake Hose Extension
More than 5Quantity:The Horn harness was not included in the set, but I was able to install it.
Replacing the Clutch Wire and Stainless Steel Mesh Brake Hose is easy, but even as a former mechanic, I had to pull the carburetor so far out of the carburetor because the Accelerator Wire was so Large strange to replace.
If you're not confident in your maintenance skills, get a motorcycle shop to do it for you.
Brake hose replacement is also dangerous from a maintenance standpoint, so I recommend you to have a PRO do it.
The photo shows a comparison with the manufacturer's Quarter3
I liked the position of the Handlebar, but the aperture is so different!
The aperture was too tight, so I replaced it immediately.
The dimensions are published on the manufacturer's website, but the numbers don't tell the whole story.
HandlebarSingle Body and may be sold at motorcycle supply stores, so you should check it out in person.
The height of the Handlebar is also limited to ±4cm in terms of vehicle inspection, which is over, so CB400SF (NC39) is apparently not allowed.
That's all I have to say for this evaluation.
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R
Good handle lifting solution, there is room for lifting.
1. Regarding the product, the problem of raising the handle is solved, but the equipped throttle cable feels much heavier than the original car! I found that the line back to the throttle is not smooth, and the line length is also very tight, just enough, it also causes smoothness problems. 2. Regarding the service, I received the wrong throttle cable for the first time, which made it impossible to install. After a long time of tossing, I re-issued the correct throttle cable and did not communicate with me about the delivery method. I directly used the one I purchased. The way of freight, because I was not in a hurry at the beginning. I chose sea freight, which took a long time. I would rather speed up the transportation at my own expense, and didn't give me this opportunity. ``` 1. Regarding the product, the problem of raising the handle is solved, but the throttle line is much heavier than the original car! What I found was that the line back to the throttle was not smooth, and the length of the line was also very tight. It was just enough, which also caused smoothness problems. 2. Regarding the service, for the first time, I received the wrong throttle line, which caused it to fail to install. After a long time of tossing, Japan re-issued the correct throttle line and did not communicate with me about the shipping method. I directly used the one I purchased Freight method, because at the beginning I was in no hurry and chose the ocean shipping, which took a long time. I would rather speed up the transportation at my own expense, without giving me this opportunity. `` `translated by google translate View detail
Fits: HONDA CB400SF, HONDA CB400SUPER BOLDOR
I have short hands, and I'm grateful for that, but if you need to make structural changes, please state them
The vehicle inspection required a structural change; OEM 72cm, this item is 80cm
The expiration date of the vehicle's inspection was shortened by nearly a month, which meant a three-hour line for structural changes
View detail
Attachment, a Position, etc. are satisfactory in general. There is no Image picture and it worried about purchase. To the panel which only a Handle buys after attachment again ... I want the picture an attachment Image is more ap
Attachment, a Position, etc. are satisfactory in general.
There is no
Image picture and it worried about purchase.
To the panel which only a Handle buys after
attachment again ...
I want the picture an attachment Image is more apt to carry out.
View detail
[Webike Monitor] If it is felt somewhat far and comes together to the front for a while in case of pure Handle was thought, and it exchanged. texture is also good, and he is also opening the hole for Switch attachment, and followed the attachment
[Webike Monitor] If it is felt somewhat far and comes together to the front for a while in case of
pure Handle was thought, and it exchanged.
texture is also good, and he is also opening the hole for Switch attachment, and followed the attachment itself snappily.
An iris diaphragm is tight and practice is required kana in operation rather than I however thought that a cause had not got used to ride on the extracted Handle since it was an Off vehicle Main until now, but having considered ...
View detail