Reviews
Fits: YAMAHA YZ80, YAMAHA YZ250 A-C, YAMAHA YZ125, YAMAHA YTM225 DXK, YAMAHA YTM225 DX, YAMAHA YTM200 K-L, YAMAHA YTM200 EX, YAMAHA YTM200 EL, YAMAHA YSR80, YAMAHA YSR50 E, YAMAHA XT500, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125 J, YAMAHA TY50 M, YAMAHA TW200, YAMAHA TT250 R, YAMAHA TDR125, YAMAHA SR500, YAMAHA SR400
Parts that are worth replacing even in NORMAL.
The handling felt heavy and a bit unmanageable, so I took it to a Motorcycle shop for a checkup.
→Steering's diagnosis was that the Ball in the Bearing was crushed. 。
It is a weak point for the SR400's OEMBearing 。
[Type of SR400OEMSteeringBearing.
...depending on the year Ball type When Angular Type." but both have low resistance but poor rigidity due to point contact.
The angularity used in older models is somewhat better than the normal Ball, but I am still concerned about rigidity.
TaperBearing was then recommended to us.
TaperBearing.
Tapered roller bearings are bearings with a structure that can receive loads generated by rotation (struss load) and axial loads (radial load). 。 The rigidity is increased to accommodate each load.
examples showing the use (of a word) : Tapered Roller Bearings are used for axles, Engine, etc. →Seems to be rigid.
TaperBearing or ball bearing?
Ball bearing→* that which the rolling element is a ball. Ball bearing (Ball bearings)
Roller bearing. (Roller bearings)
Rolling elements are balls or rollers that are incorporated inside the bearing.
[Merit of TaperBearing
◎Handling is prone to rattling under severe use at high speeds, such as on highways and circuits.
Ball bearing→ ball-shaped, so it is weak under load and crushed.
TaperBearing→ Loads are taken up by the "wire" of the Needle, resulting in a larger bearing area, improved durability, and smoother handling. 。
In other words, the load is received in a line→ The load flows as it is because the load direction is a single line.
Effect after replacement
◎I could feel less shaking of the handlebar at high speeds, and could sense that stability had improved.
◎SelfStir can be easily taken out. as Image, put the one in the direction you want to turn lightly, and Image turns smoothly.
◎Push walking became somewhat easier.
By changing to this, we were able to experience an increase in rigidity.
The difference is especially noticeable at high speeds and in situations where the front load increases, such as when driving at high speeds and in situations where the front load increases due to winding.
TaperBearing is a good thing, but it also has its weak points.
[Weaknesses
Due to the increased resistance caused by the surface contact, it is not good in the speed range from very low speeds to street level speeds.
The lightness of the OEM is slightly outweighed by the lightness of the OEM.
Considering MaintenanceCycle and Cost performance, if you judge overall, I think OEM Angular is a good choice for those who ride Main in the city. For those who want to enjoy touring and winding with high speed driving in mind, we definitely recommend the Taper.
*It is better to have the replacement done at a Motorcycle shop if at all possible.
View detail
Fits: KAWASAKI BALIUS [BALIUS] I B1-B4, KAWASAKI BALIUS [BALIUS] I B1, KAWASAKI BALIUS I B4, KAWASAKI BALIUS [BARIOS] II B1-B4, KAWASAKI BALIUS [BALIUS] II B1, KAWASAKI EL250 E1-E2, KAWASAKI BALIUS [BARIOS] II B4, KAWASAKI EL250 E1, KAWASAKI EL250 E2, KAWASAKI ELIMINATOR 125 [ELIMINATOR] A1-A2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2-B3, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B3, KAWASAKI ER500 A1, KAWASAKI ER500 A1-A3, KAWASAKI ER500 E1-E3, KAWASAKI ER500 A3, KAWASAKI ER500 E1, KAWASAKI ER500 E3, KAWASAKI ESTRELLA [Estrella] B
Mounted on ZZr250
Mounted on ZZr250
SelfStir was a tough car model,
After replacing it with this one, that has been alleviated.
I guess it is a standard Custom for ZZr250.
View detail
Fits: YAMAHA RZ250R 29L, YAMAHA RZ350R, YAMAHA XS400 D-K, YAMAHA XS400S H, YAMAHA XS400S J, YAMAHA YTM225 DX N, YAMAHA TDR125, YAMAHA TZ125 G, YAMAHA RD350 LC, YAMAHA XS250R, YAMAHA XS250 R, YAMAHA XS250 S, YAMAHA XJ600, YAMAHA SRV250S, YAMAHA SRX250, YAMAHA RZ350RR, YAMAHA SDR200, YAMAHA SR250 G-J, YAMAHA SRV250 S, YAMAHA srv250 runessa
Satisfied
Used for YamahaRZ250R I had a rattle in my handlebar that could not be fixed by adjustment, so I decided to go with TaperBearing because OEM is ball bearing and it is more expensive. ??They are the best. ??Most old cars have ball bearings, so it is worth it to switch to Taper. It can be used on many different types of cars. If you feel something is wrong with your handling, you should change to Taper. ?? View detail
Fits: YAMAHA DT80 LC 53V, YAMAHA DT200 R 37F, YAMAHA DT125 R, YAMAHA DT80 LC II, YAMAHA TDR125, YAMAHA TDR250, YAMAHA serow 225 [serow].
SEROW225 1KH Changed from ball bearing to taper bearing
SEROW225 1KH I was able to change from ball bearing to taper bearing and I am satisfied with the Large change.
I was able to find old SEROW parts in high quality and Large was very helpful.
View detail
Fits: HONDA CB-1, HONDA CB1000 F, HONDA CB400 FOUR III, HONDA CB400 SF Y V-TEC, HONDA CB500 S, HONDA CB500, HONDA CB750 SC, HONDA CB750F II 92-, HONDA CBR1000 F Hurricane, HONDA CBR250 RR, HONDA CBR400 F 1-3, HONDA CBR400 RR N, HONDA NS250 R, HONDA NS400 R G, HONDA NSR250 F, HONDA VF1000 F G, HONDA VF1000 FII G, HONDA VF1000 R, HONDA VF1100 C, HONDA VF1100 S
NSR250R steering taper bearing replacement
The OEM and Bearing specs have been changed, and the area of contact between the OEM and Bearing has been increased, so I feel like there is more information. It was a little noisy on rough surfaces, but I am satisfied with the result because of the increased rigidity. View detail
Fits: YAMAHA YZ80, YAMAHA YZ250 A-C, YAMAHA YZ125, YAMAHA YTM225 DXK, YAMAHA YTM225 DX, YAMAHA YTM200 K-L, YAMAHA YTM200 EX, YAMAHA YTM200 EL, YAMAHA YSR80, YAMAHA YSR50 E, YAMAHA XT500, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125 J, YAMAHA TY50 M, YAMAHA TW200, YAMAHA TT250 R, YAMAHA TDR125, YAMAHA SR500, YAMAHA SR400
Used by MAJESTY125
A lot of Yamaha bikes are ball type, which is fine from a handling point of view, but the MAJESTY125 has a lot of Stem gurgling problems!
So, I replaced it with this product of high durability.
Of course, the new one works great and is now normal from the dizzy Handling that seemed to mock up.
However, the replacement work is very Large strange, Top level so far (Large strange in a sense than full Overhaul by taking down the Engine)
It's not the kind of difficulty that can be managed with tools, and beating the Race is a feat of strength.
Of course, after all the rods around the front, we had to fight with the bearings for a few hours, and the race press fitment was also very careful.
If you don't know what you're doing, it's best to take it to a shop, because you won't be able to return it to its original state and take it to a motorcycle shop.
View detail
Fits: YAMAHA RZ250R 29L, YAMAHA RZ350R, YAMAHA XS400 D-K, YAMAHA XS400S H, YAMAHA XS400S J, YAMAHA YTM225 DX N, YAMAHA TDR125, YAMAHA TZ125 G, YAMAHA RD350 LC, YAMAHA XS250R, YAMAHA XS250 R, YAMAHA XS250 S, YAMAHA XJ600, YAMAHA SRV250S, YAMAHA SRX250, YAMAHA RZ350RR, YAMAHA SDR200, YAMAHA SR250 G-J, YAMAHA SRV250 S, YAMAHA srv250 runessa
I'll believe in "Made in Japan quality"!
Frame headPipe Outer for under bracket bearing on the underside The process of typing lace was a battle with anxiety … Han Merlingu typing in is noisy (Neighborhood nuisance.) I was so scared because the position where the outer lace stops is so far back Is there any mistake in the parts? Is it possible that the handlebar is not turned off due to contact with the pipe?
The inner diameter of the outer lace is thinner than the diameter of the inner wall of the head pipe, so remove it again There are no dents in the bearing Also, when the bearing is worn out, the bearing's wall thickness is not in contact with the bearing's thickness, making it inoperable hellip; I was so worried
On the way, I tried to apply the Under bracket; Because it was not possible to turn back, I continued typing as it was
…As a result, the installation is complete I did We'll run for a while and see what happens It was a windy day, but the neck root (Stem) The feeling of rigidity transmitted from the car is increased and the car becomes stable and fun to drive
I think you should ask Shop to do the work for you
View detail
Fits: YAMAHA RZ250R 29L, YAMAHA RZ350R, YAMAHA XS400 D-K, YAMAHA XS400S H, YAMAHA XS400S J, YAMAHA YTM225 DX N, YAMAHA TDR125, YAMAHA TZ125 G, YAMAHA RD350 LC, YAMAHA XS250R, YAMAHA XS250 R, YAMAHA XS250 S, YAMAHA XJ600, YAMAHA SRV250S, YAMAHA SRX250, YAMAHA RZ350RR, YAMAHA SDR200, YAMAHA SR250 G-J, YAMAHA SRV250 S, YAMAHA srv250 runessa
Handlebar moves to Smooth
When you cut Handlebar there is a catch,
As I was concerned, I watched everyone's impressions and purchased
Carefulness is required for exchange, but take time
I think I can do it if I try
Let's ask Shop for those who do not have themselves
It is satisfying with Smooth operation feeling after exchanging
View detail
Fits: YAMAHA YZ80, YAMAHA YZ250 A-C, YAMAHA YZ125, YAMAHA YTM225 DXK, YAMAHA YTM225 DX, YAMAHA YTM200 K-L, YAMAHA YTM200 EX, YAMAHA YTM200 EL, YAMAHA YSR80, YAMAHA YSR50 E, YAMAHA XT500, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125 J, YAMAHA TY50 M, YAMAHA TW200, YAMAHA TT250 R, YAMAHA TDR125, YAMAHA SR500, YAMAHA SR400
Speaking of TaperBearing, this
It is an exchange from Ball which became the gorigol of 1997 formula SR.
It is troublesome to exchange frequently, so we made it as durable as possible Taper.
Unlike the sense of the previous gorillades, the Stir that makes a sudden turn is a pleasant one.
View detail
Fits: HONDA XL185 S, HONDA XR80 R, HONDA XR75 K1-, HONDA XL100 S, HONDA TL125 S, HONDA XL75, HONDA XL70, HONDA Z50 A, HONDA CT90 K1-K6, HONDA CT90 K6, HONDA CT90 K1, HONDA MB5S 50, HONDA MB80 RS D, HONDA MBX125 FE, HONDA MBX50 SW, HONDA MT125 K1, HONDA MR50 K1, HONDA MT50 Z, HONDA MTX80 C, HONDA NS125 RK
At Restore
As a restore of NS-1, long ride after fixing
OEM's Bearing was gorigori so I tried inserting Taper roller even in the sense of experiment
First of all, since the area to be hit is different even from the receiving side of Bearing, I think that it contributes to the dispersion of force and is related to the Length of the life span.
As for installation, it is the same as OEM and by saying that Bearing's Outer is press-fitted into the Frame's Stem section
Rubber with Han or the like etc etc. I hit and hit the OEM Outer that I removed.
Bearing is driving in StemRace, but I got on with the removed OEM Outer and hit it with PVC Pipe and inserted it
I assembled Stem into Frame and cut Handlebar, before exchange it had gorigoly feel but it was very pleasant to move to Smooth.
Grease sticks out water resistant Bearing Grease and wipes out if it runs out
I still can not get out of Fork's OH because of the Gold monetary problem but I would like to Impression if there is another opportunity after installation.
View detail
Fits: YAMAHA YZ80, YAMAHA YZ250 A-C, YAMAHA YZ125, YAMAHA YTM225 DXK, YAMAHA YTM225 DX, YAMAHA YTM200 K-L, YAMAHA YTM200 EX, YAMAHA YTM200 EL, YAMAHA YSR80, YAMAHA YSR50 E, YAMAHA XT500, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125 J, YAMAHA TY50 M, YAMAHA TW200, YAMAHA TT250 R, YAMAHA TDR125, YAMAHA SR500, YAMAHA SR400
For the SR this is the best set of bearings to use. Due to the odd size of one bearing, other sets available on the market are never 100% correct. If you want tapered bearings this set is the best option.
For the SR this is the best set of bearings to use. Due to the odd size of one bearing, other sets available on the market are never 100% correct. If you want tapered bearings this set is the best option. View detail
Fits: HONDA CB750 F F2, HONDA CBX250 RS, HONDA CB750 K1-K7, HONDA CBX400 F2, HONDA CBX550 F Integra, HONDA CBX650 SC, HONDA CJ360 T, HONDA CM250 C, HONDA CM250 T, HONDA CM400 T, HONDA CM450 E, HONDA CX500 C, HONDA CX500D A, HONDA CX650 E, HONDA FT500C, HONDA GB250 CLUBMAN [Clubman] E-S, HONDA GB400 F II Tourist Trophy, HONDA GB500 Tourist Trophy, HONDA GL500 I, HONDA GL1000 L
Exchange of a method was simply completed to exchange by oneself, since shakiness of the existing Bearing was worrisome rather than having considered, since it referred to the Net. The motion of a Taper Bearing was very smooth and the Handling became ver
Exchange of a method was simply completed to exchange by oneself, since shakiness of the existing Bearing was worrisome rather than having considered, since it referred to the Net.
The motion of a Taper Bearing was very smooth and the Handling became very good.
Pleasant time was able to be spent although it was
self-responsibility.
View detail
Fits: HONDA VF750 S F, HONDA VFR250, HONDA VT700 C, HONDA VTR250, HONDA VF700 C, HONDA PC800 PACIFIC COAST [Pacific Coast]., HONDA NTV650, HONDA MAGNA 750 [Magna]., HONDA GL1500 SE, HONDA GL1500 GOLDWING [Goldwing]., HONDA GL1500 GOLDWING [Goldwing]., HONDA GL1500 A, HONDA GL1200 L GOLDWING [Goldwing]., HONDA GL1200 GOLDWING [Goldwing]., HONDA GL1200 GOLDWING [GOLDWING] I, HONDA GL1200 D GOLDWING [Goldwing]., HONDA GL1100, HONDA GL1100 I, HONDA GL1100 D, HONDA GL1100 A
[webike Monee Tarr] It exchanges simultaneously with the Maintenance of the Front fork. Although not hurt so much, a cutback became easy from forward.
[webike Monee Tarr] It exchanges simultaneously with the Maintenance of the
Front fork.
Although not hurt so much, a cutback became easy from forward.
View detail
Fits: YAMAHA RZ250R 29L, YAMAHA RZ350R, YAMAHA XS400 D-K, YAMAHA XS400S H, YAMAHA XS400S J, YAMAHA YTM225 DX N, YAMAHA TDR125, YAMAHA TZ125 G, YAMAHA RD350 LC, YAMAHA XS250R, YAMAHA XS250 R, YAMAHA XS250 S, YAMAHA XJ600, YAMAHA SRV250S, YAMAHA SRX250, YAMAHA RZ350RR, YAMAHA SDR200, YAMAHA SR250 G-J, YAMAHA SRV250 S, YAMAHA srv250 runessa
Since the Handle began to have blurred when it was running from before for a while without using a Knee grip, an order was placed. Since the car-body design was old from the first, brand-name parts have Been the usual Ball bearings, and it
Since the
Handle began to have blurred when it was running from before for a while without using a Knee grip, an order was placed.
Since the car-body design was old from the first, brand-name parts have
Been the usual Ball bearings, and it used them as this product.
Although wear of the
Tire was also considered as a cause,
condition stopped appearing only by Stainless-bearing exchange.
It became likely to have made into the Snap by having become
Taper-roller-bearing support.
It was good to carry out
exchange.
View detail
Fits: KAWASAKI BALIUS [BALIUS] I B1-B4, KAWASAKI BALIUS [BALIUS] I B1, KAWASAKI BALIUS I B4, KAWASAKI BALIUS [BARIOS] II B1-B4, KAWASAKI BALIUS [BALIUS] II B1, KAWASAKI EL250 E1-E2, KAWASAKI BALIUS [BARIOS] II B4, KAWASAKI EL250 E1, KAWASAKI EL250 E2, KAWASAKI ELIMINATOR 125 [ELIMINATOR] A1-A2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2-B3, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B3, KAWASAKI ER500 A1, KAWASAKI ER500 A1-A3, KAWASAKI ER500 E1-E3, KAWASAKI ER500 A3, KAWASAKI ER500 E1, KAWASAKI ER500 E3, KAWASAKI ESTRELLA [Estrella] B
Since the Ball bearing of the NORMAL was cracked and that it was a Motorcycle by which a Handle blurs easily from the first does not need to spill an exchange ? [ kana / which was reduced for a while ] Ball to a Taper roller. The place where a M
Since the Ball bearing of the NORMAL was cracked and that it was a Motorcycle by which a Handle blurs easily from the first does not need to spill an exchange
? [ kana / which was reduced for a while ]
Ball to a Taper roller.
The place where a Maintenance tends to carry out it is good. Since the Dust seal of the
NORMAL cannot be used, frequency goes up.
View detail
Fits: HONDA CB-1, HONDA CB1000 F, HONDA CB400 FOUR III, HONDA CB400 SF Y V-TEC, HONDA CB500 S, HONDA CB500, HONDA CB750 SC, HONDA CB750F II 92-, HONDA CBR1000 F Hurricane, HONDA CBR250 RR, HONDA CBR400 F 1-3, HONDA CBR400 RR N, HONDA NS250 R, HONDA NS400 R G, HONDA NSR250 F, HONDA VF1000 F G, HONDA VF1000 FII G, HONDA VF1000 R, HONDA VF1100 C, HONDA VF1100 S
Although I haven't run for a long distance after wearing, I know the difference from the genuine. It seems to be firm.
Although I haven't run for a long distance after wearing, I know the difference from the genuine. It seems to be firm. View detail
Fits: HONDA CB-1, HONDA CB1000 F, HONDA CB400 FOUR III, HONDA CB400 SF Y V-TEC, HONDA CB500 S, HONDA CB500, HONDA CB750 SC, HONDA CB750F II 92-, HONDA CBR1000 F Hurricane, HONDA CBR250 RR, HONDA CBR400 F 1-3, HONDA CBR400 RR N, HONDA NS250 R, HONDA NS400 R G, HONDA NSR250 F, HONDA VF1000 F G, HONDA VF1000 FII G, HONDA VF1000 R, HONDA VF1100 C, HONDA VF1100 S
It is used for [Webike-monitor] NSR250R and 88 models. Unlike a former ball bearing, it moves smoothly. I think that it is large well that the former state was too severe. Durability is likely to be expectable. Since the price regarded a f
It is used for [Webike-monitor] NSR250R and 88 models.
Unlike a former ball bearing, it moves smoothly.
I think that it is large well that the former state was too severe.
Durability is likely to be expectable.
Since the price regarded a few as neck kana, they are four stars.
View detail
Fits: KAWASAKI BALIUS [BALIUS] I B1-B4, KAWASAKI BALIUS [BALIUS] I B1, KAWASAKI BALIUS I B4, KAWASAKI BALIUS [BARIOS] II B1-B4, KAWASAKI BALIUS [BALIUS] II B1, KAWASAKI EL250 E1-E2, KAWASAKI BALIUS [BARIOS] II B4, KAWASAKI EL250 E1, KAWASAKI EL250 E2, KAWASAKI ELIMINATOR 125 [ELIMINATOR] A1-A2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2-B3, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B3, KAWASAKI ER500 A1, KAWASAKI ER500 A1-A3, KAWASAKI ER500 E1-E3, KAWASAKI ER500 A3, KAWASAKI ER500 E1, KAWASAKI ER500 E3, KAWASAKI ESTRELLA [Estrella] B
Although it was dreadful before exchange for a handle to have blurred extremely and to have operated at 60~80 km, Since I had this attached at a shop, and there was firm touch even if it was as handle 謠。 whether blur of a handle was completely lost an
Although it was dreadful before exchange for a handle to have blurred extremely and to have operated at 60~80 km,
Since I had this attached at a shop, and there was firm touch even if it was as handle 謠。 whether blur of a handle was completely lost and also rigidity went up, it can have operated in comfort! It was good to buy it!
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-9R C1-C2, KAWASAKI ZX-9R C1, KAWASAKI ZX-9R C2, KAWASAKI ZX1100 D1 ZZR1100, KAWASAKI ZX1100 D1-D7 ZZR1100, KAWASAKI ZX1100 D7 ZZR1100, KAWASAKI ZX400 L1 ZXR400, KAWASAKI ZX400 L1-L9 ZXR400, KAWASAKI ZX400 L9 ZXR400, KAWASAKI ZX750 J1 ZXR750, KAWASAKI ZX750 J1 ZXR750R, KAWASAKI ZX750 J1-J2 ZXR750, KAWASAKI ZX750 J1-J2 ZXR750R, KAWASAKI ZX750 J2 ZXR750, KAWASAKI ZX750 J2 ZXR750R, KAWASAKI ZX750 K1 ZXR750, KAWASAKI ZX750 K1-K2 ZXR750, KAWASAKI ZX750 K2 ZXR750, KAWASAKI ZX750 L1 ZXR750R
When carrying out a right and left chip box by re-start after a stop, it worried about the phenomenon in which a handle goes out suddenly. When exchanged for the bearing here, it came to move to a smooth very much. We recommend exchange to the dir
When carrying out a right and left chip box by re-start after a stop, it worried about the phenomenon in which a handle goes out suddenly.
When exchanged for the bearing here, it came to move to a smooth very much.
We recommend exchange to the direction which feels sense of incongruity for the motion of a handle by old motorcycle.
View detail
Fits: YAMAHA DT80 LC 53V, YAMAHA DT200 R 37F, YAMAHA DT125 R, YAMAHA DT80 LC II, YAMAHA TDR125, YAMAHA TDR250, YAMAHA serow 225 [serow].
TDR250 was equipped. The upper part was a ball race an authentic positive one. Since it became a taper roller also with the upper and lower sides by changing to this product, it is expected that durability will go up. About the bottom, the bea
TDR250 was equipped.
The upper part was a ball race an authentic positive one.
Since it became a taper roller also with the upper and lower sides by changing to this product, it is expected that durability will go up.
About the bottom, the bearing parts number was the same in it being pure.
Although the dust cover stuck pure, it was not attached to this product.
Grease up may be needed.
Operation is very smooth.
Although others were also commented, it is kind if it sells not with set sale but with an up-and-down simple substance.
View detail