Reviews
The texture and feel are both good.
[How is it used?
Because the OEMLever of the GSX-S 125 is not adjustable, and also to Upgrade its appearance.
We compared it to Endurance's Lever, but this one seemed to be more to our liking in terms of lever shape, length, etc., so we went with this one.
Was the one you received as per Image?
The texture is as good as the picture shown.
Was the installation difficult?
No problem.
How was your experience with it?
The adjustable type is easier to adjust to the position of your choice, and it also feels better when you run.
[Included Parts:were they on?
I think it came with a ManufacturerLogo sticker.
[Was there anything that disappointed you?
Nothing in particular. I dare say that the Retractable Lever was so loose that it moved immediately after arrival that I had to retighten the nut to prevent it from moving.
Blue Anodized is a little lighter than U-KANAYA's Blue, etc. I think it fits GSX-S125's Birdton Blue. (The Normal Holder has a large amount of play, so it may rattle a little, but I think that can't be helped. If you are worried about the rattling, it would be better to replace the MASTERBODY with Landor or brembo.
View detail
It is easy to operate and looks stylish.
Installed on a GSX-S125, almost OEM and comfortable. I chose the black color, so the Knob for adjustment is red, which is a good accent. It is adjustable, but it was not so useful for me because I have small hands and use it closest to the grips. (I think it would be useful for people with large hands who use the OEM Lever too close to the Grip). The quality is high, and I am satisfied with the non-slip finish on the part where the Lever's fingers hit the surface. View detail
Fits: HONDA 400X, HONDA 400X, HONDA 400X, HONDA CB125R, HONDA CB250F, HONDA CB250R, HONDA CB400F, HONDA CBR250R, HONDA CBR400R, HONDA CBR400R, HONDA GROM, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA CB300R, HONDA CB150R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
I chose Brand again because it is a reliable Brand.
The look was good enough for me and I decided to go with SNIPER again. It is easy to use. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Good but not perfect
Made reasonably well and installed perfectly, unfortunately they arrived slightly damaged due to non-protective packaging, which is a shame. -------------------------------------------------- -------- Facted discreetly well and they are perfectly installed, unfortunately you get slightly ruined due to a non-protective packaging, pity. Powered by Google Translator View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Discrete
Beautiful but unfortunately arrived with some small aesthetic defects, due to poor packaging from the manufacturer and the supplier also considering the journey to be undertaken. -------------------------------------------------- -------- Beautiful but unfortunately you arrive with some small aesthetic flaws, due to a bad packaging of the manufacturer and supplier also given the journey to face. Powered by Google Translator View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERStem Nut Cap
I installed it with One pointAccent. I think it's pretty good. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPERSNIPERClutch Lever & Brake Lever Set
I bought it because of the design and color and I love it! View detail
Fits: HONDA CBR250RRR
Failure on Brake lever side
Although I am not dissatisfied with the appearance and functionality, the bolt threading holes on the Brake Side are not accurate enough to allow the bolt to be penetrated during installation.
I was forced to make a guess and installed it by penetrating it halfway, but for a moment I thought I had the wrong parts.
I may not buy it next time.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
Quality is fine, but be careful when using Handlebar Guard together.
The OEM brake lever seemed a little far away, so I decided to replace it with a brake lever with a grip distance adjuster.
The installation is not so difficult, and even an amateur can do it if he has Universal tools, so I did it myself at my own risk. However, there is no need to do anything to the brake fluid line; all you need to do is remove the bolt from the bracket where the lever is attached and replace the part. It was a bit tedious to remove the bolt. I had to loosen some parts around it.
After installation, I was able to use it comfortably.Adjust adjustment of Lever was also easy, and it was in a quite nice position.Quantity:Now that I can set the brake lever, it is easier to operate the brake at a moment's notice, so I don't have to keep my finger on the brake lever all the time, even on narrow small roads.
However, the tip of the lever interfered with ZETA's AdventureArmor Handguard, which was installed later, and hit it, making it impossible to grip the lever, so I removed it in tears. A little more. (5mm more) I had the option of cutting off the end of the Lever, since it was shorter and could be compatible without interference, but it was kind of a waste...
I'll sell it at GarageSale on Web!ke. (Lol)
The product itself is fine, Material:Aluminum and lightweight, I am satisfied with the quality.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Parenthesis OK
The 3D processing of Lever is very beautiful.
Tension goes up whether you are driving or looking at it.
Levers easily fall over, but I think I prefer them to be a little tighter.
Well, it is safe to say that in the event of a fall, it will fall right back down.
View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN S 650, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000, KAWASAKI VULCAN 650
It was the right decision to buy it.
It is easier to grip than OEM ones and I like the color.
However, I think it might be a little short.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It is slim and easy to use.
I used a UK made one on my first 25R, but the SNIPER one I had installed on my 6R was slimmer and easier to grip, so I bought one for my 25R as well.
The fact that it is Foldable was also a Point of Purchase.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Good color.
First of all, it looks great and the texture is great.
Installation was easy. I applied a light coat of Grease before use.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
It is easy to install.
I think the play of the attachment part is a little too large, but the feel is good. View detail
textured good feeling
Texture and Design are good. It is a slender Frame, so I think the Aluminum Frame will bend if it falls down.Carbon parts seem to be Large sturdy if Dry carbon, but Wet Carbon will break with a single blow. View detail
Fits: HONDA CBR250RRR
Easy Exchange
It was easy to replace the clutch, but I felt some wobble when operating the clutch and breaking the foldable for the first time, and I wondered if this was just a normal thing.
Easy to grip, lever position adjustable, and cutting is great!
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
textured good feeling
Easy to use and adjust. Maybe Large sturdy even when tipping over. View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
I am satisfied with the position adjustment.
I replaced it because I had small hands and felt that Lever was too far away.
I don't like Short lever, so I looked for a long lever.
We decided to go with this Lever.
There is some Wobble, but it is within expectations for this type of Lever.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Replacement from Back Plastic
The OEM was black plastic and poor looking, so I wanted to change the look and dress-up the look.
Black Anodized Finishing was my first choice, but Webig only has Gold, and I have a SFF-BPFork in Gold and a SNIPER product in Gold on my Master Cylinder, so I chose Gold for a sense of unity.
This Stem Nut Cap is completed by simply removing the black resin cap using a peel-off tool and inserting it.
This Stem Cap…
I am glad I purchased it because the anodized finishing gives it a more textured look.
Two SNIPER Stickers are enclosed, which is a nice touch.
I thought it would be Large sturdy in the heat of summer since it is only installed with a thin oRing tension.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Replacement of Resin Cap
The OEM resin Cap was poor.
I paired it with a front fork cap.
It's nice
View detail