Reviews
Fits: HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC, HARLEY-DAVIDSON Dynamo Dell, HARLEY-DAVIDSON XL1200C SPORTSTER 1200
no problem
No different from OEM Product 。 This is the second time I've had to replace it, maybe it's where it breaks down quickly.
This is helpful for those who can fix it themselves.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
OEM and same as etc. products
The HarleyOEM Snap ring was rusted out so I bought this product instead.
The impression is that it is built to be quite rigid, just like the OEM.
Snap rings are inconvenient because you need a special tool to attach them, but they are useful because bolt etc. will fall out if you don't wear them.
I am very satisfied and will try to buy this product again next time.
View detail
Easy to grip!
[How is it used?
busy
Was the one you received as per Image?
Street Image
Was the installation difficult?
This was my first time replacing a lever on a Harley, but it was easy since all I had to do was pull the pin.
How was your experience with it?
I had the impression that the thin one was easier to grip than Harley's thicker Lever.
[Included Parts:were they on?
Reinforcement Spring
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
important point
⇒Pivot pin is hard to pull out without a tool.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Pimping is not possible, but the cosmetics are good.
I purchased this product because OEM is expensive. As other people have commented, the hole where the cone enters on the lever side is full of BALI and needs to be corrected by Fileetc. However, considering it as a consumable item, the cost is good. View detail
It worked for now.
At least it worked for now;
I am concerned about how far it can be used.
I hope it is Large sturdy…
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
A little long.
The description says it is compatible with OEM Style, but it is still a bit long. The accuracy is not good, and I could not install it without cutting it with Leutor. It may be difficult to say it is a good product. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Before it snaps.
Cable's Outer has been cracked, so I replaced it.
It's a better price than OEM, but it's well made and will work fine.
The installation process was easy and quick.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
it is normal
It is a small part, but it is helpful to have Lineup.
The difficulty of the exchange was low and it took a short time.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
COSPA is good.
It is as good as OEM and cheaper than OEM.
It is well made and I appreciate that there are various lineups to choose from in terms of length.
The difficulty of the exchange was low, and it was possible to exchange it in a short time.
View detail
COSPA is good.
It works as well as the OEM and is definitely cheaper than the OEM.
The texture is good and the feeling of use is normal.
I appreciate that there is a length line up to choose from.
It was a quick and easy exchange with low difficulty.
View detail
Fits: HARLEY-DAVIDSON Old schoolHand control by NeoFACTORY
Lever break, then.
Ideal for replacing a broken Lever.
However, the accuracy between Nut and Lever is poor, with no adjustment range….Brake master and Quantity:It's a shame because I had no problem with Lever in Set.
View detail
Fits: HARLEY-DAVIDSON Old schoolHand control by NeoFACTORY
The texture is nice.
Polish texture is Parenthesis good. View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily
Fallen cannibals
I bought 4 of them to avoid opening the pliers too much and bending them, or skipping them and losing them…. I have not used it yet because I was able to do it well, but if I don't have a spare, the mental margin is Large difference. I can't get over how cheap NeoFACTORY is. View detail
the product is great. nice chrome on top with plastic on bottom. the button very good to press. the shipping take a little bit long, about twenty days. View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
Quality is not good
I had the replacement done at a specialty Shop and the Lever side Ring shattered upon adjustment! I'm glad I didn't start running it. I guess they didn't inspect it or anything. The return and exchange was also no good. It is better not to use the original without knowing the identity. View detail
Thanks for the good product.
Equipped with a pretty handle riser at an affordable price. It is simple and has a good oldschool feel. And it is easy to mount the phone holder. I always use neofactory products Thank you !!! Hmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm ----------- It was equipped with a handle pretty analyzer at an affordable price and is recommended .simple oldschool feeling. And easier to mount a cell phone holder. I always use thank neofactory products !!! ㅇㅎ you ㅎㅇㅎ Powered by Google Translator View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily
OEM same etc.
It is used for 2003 MODELXL1200C SPORTSTER 1200.
I replaced it with the Clutch lever at the same time.
The shape is the same as the OEM's and is easier to grip.
View detail
I will write well.
Best of all, if you buy the right length. It's cost-effective and great.. But it's a big trap for me to do it wrong. According to the handle height or size, measure the length carefully and check the color carefully before purchasing. I am very satisfied. Thank you.~~ Best of all, if you buy just the right length. The cost performance is good and it's awesome... But I made it wrong is a big trap. Measure the length according to the handle height or size and check the color carefully before purchasing. I am very satisfied. Thank you. translated by Google Translator View detail
I'll use it well.
I don't really leave any reviews about the cable, but it's a good value for money cable. If you buy it according to the length, it will be better than any expensive cable. It's also good for reviving the old-fashioned poster feel. I want to get it replaced soon. Well done thank you Haha The cable is not particularly late, but it is a cost-effective cable. If you buy well, it will be better than any expensive cables. It's also good for reviving the old-fashioned sposter feel. I want to change it and get on. Thank you. hehe translated by Google Translator View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily
Can be used for the same as OEMs, etc.!
I purchased this for Replacement as a maintenance for Clutch Cable.
First of all, it can be used for the same as OEMs, etc.
The installation accuracy is also within the limits of what is acceptable.
It was shaved with File because there was a little BALI in the hole which inserts Pin on the Lever side.
Cost performance is good.
View detail