Reviews
difficult to install
It was difficult to install and tore during installation. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Amazing Top Bridge Dress Up Bolts
The quality is amazing with a great polished nickel look. I've included a photo for comparison. The supplied bolt is slightly longer and the countsunk has a larger surface area, I feel as though it's much stronger now. Would recommmend buying with polished top plate for a great look. Installation was extremely easy, I believe anyone can do it. Shipping was super fast from webike, always happy thank you webike! View detail
useful
The material is soft and comfortable, and my fingers stay cool even in the middle of winter, so it is very useful. View detail
To combat the cold.
I use it every year to prevent my hands from getting cold from leever. View detail
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
Fits: HONDA Super Cub 110, HONDA SUPER CUB 110
Recommendation to those with Small hands!
SUPER CUB110 (JA44) The OEMBrake lever is comfortable to hold, but the hand Small (short fingers) It is a somewhat distant position for me.
OEMLever is not an adjustable Type, so I was looking for one and found this product and bought it.
For the same reason, I installed it prior to the CROSSCUB110 and found it very easy to use, so I guess it would be a Repeat purchase.
Lever1 I am a little hesitant because of the price, but the quality of the product itself is very good, and above all, I am convinced of the comfort of the product after using it.
Since it is a part that is constantly touched while driving the Motorcycle, the cost per ride time is probably very small.
Installation is simple as a mechanism, but it takes a surprisingly long time, including removing the Cover on top of the Handlebar.
I broke my customary claw when removing the Cover:....
If you are clumsy like me, I think it is safer, cheaper and faster to leave the work to Shop ^ ^ ^.
In general, this is a very Recommendation product for those who complain that the Brake lever is too far away.
View detail
Effective for hand Small saiRider
Honestly, if the price of the Brake lever1 pc.
I think it is very expensive.
Still, I was right to replace it.
Brake lever of CROSSCUB110 because my hand is small
It was difficult to operate due to the remoteness of the
OEMs are levers that cannot be adjusted, and inexpensive for replacement
The OEMs are all in the same position as the OEMs.
The replacement work is simply to remove the Bolt and Wire that serves as the axis.
It is very simple:Wire on the front drum side.
It is best to do this after loosening the
After the replacement, the feel is Outclassing better!
Quantity of index and middle fingers:2pc seating in just the right position.
The following is a list of the most important items.
Not having an unreasonable hand position is the key here when driving.
I did not expect to feel as comfortable as I did.
Since it is an expensive lever, be careful not to fall and break it.
I would like to ride with it on!
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Cool!
The switch is mounted accurately on the 1inch handlebar. The processing is very perfect, and the feeling of the buttons is very good View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Awesome!
The switch is mounted accurately on the 1inch handlebar. The processing is very perfect, and the feeling of the buttons is very good View detail
It can be used for bicycles.
After polishing the brake lever with Water-resistance Paper, use Silicon spray for easy entry! 。 It can also be used for bicycles, and I think it's easier to make subtle adjustments with this on. View detail
Short Brake Lever
The texture of the Cut-out is very good, I shortened it due to the circumstances when I parked it, but there is no problem.
But Brake Lockand Unlock is NORMALLever easier to use.
View detail
It's easier to operate!
I installed this product to replace the OEM Product. It was easy to install and the Instruction Manual with pictures was written in detail. It is easier to operate the Lever than the OEM Product because the Lever position is closer than the OEM Product! It's just my personal opinion... but it was a good purchase. (^O^) View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA
Good length for OEMHandlebar
I bought this wire because my carburetor was PC20. When I purchased it, I installed and used STD Handlebar with no problem.
SHIFT UP's Catalogue says that 4cmUp is OK for Cable and Wire, just like OEMs, and it's not impossible to reach them.
Quantity Handlebar:Pair (for Left and Right) The wire will not be pulled even if you cut it to "1", but I think that those who will replace the Handlebar afterwards should consider the length well.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Diversion
As M10Bolt, it was diverted as the top bridge bolt of YZF-R15.
Since InitialAdjuster was Gold, I searched for Gold here as well, so this was the most affordable.
It was able to be installed aiming, the surroundings of Handlebar became unified and it became cool.
View detail
these mini switches feel relay nice, the switch mechanism feels good and feels like it will last, the switches are easy to install. i googled installing a posh switch and found a few good sites about what size clearance holes and what size to tap the mo
these mini switches feel relay nice, the switch mechanism feels good and feels like it will last, the switches are easy to install. i googled installing a posh switch and found a few good sites about what size clearance holes and what size to tap the mounting screws. all up id say the switches are great value and once installed relay tidy up the bar area of you bike. View detail
The switches feel like they are good quality, an d are a great way to tidy up your handle bar area. they dont come with any mounting instructions but if you look on google all the info is there.
The switches feel like they are good quality, an d are a great way to tidy up your handle bar area. they dont come with any mounting instructions but if you look on google all the info is there. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA
When using the Manifold of Mukawa at the time of PC20 carburetor attachment, since die length was delicately lacking when pure, it exchanged. a GORILLA -- pure -- although it is somewhat long, sense of incongruity in particular is not in management of a
When using the Manifold of Mukawa at the time of PC20 carburetor attachment, since die length was delicately lacking when pure, it exchanged. a GORILLA -- pure -- although it is somewhat long, sense of incongruity in particular is not in management of a Wire. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA
Since die length became insufficient at the time of handle exchange, it exchanged. The price was also handy and was saved. It is easy to treat the used touch practically equal with being pure.
Since die length became insufficient at the time of handle exchange, it exchanged.
The price was also handy and was saved.
It is easy to treat the used touch practically equal with being pure.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA
Exchange is also easy and it can also perform accelerator operation satisfactorily. I think that a price is also appropriate.
Exchange is also easy and it can also perform accelerator operation satisfactorily.
I think that a price is also appropriate.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Monkey BAJA
The base car body attached the carburetor to PC20 by CD50. The axel wire changed the handle not much by having changed into a single character. Although it could be used without the problem and a carburetor change was made in PC20 the other day PE
The base car body attached the carburetor to PC20 by CD50.
The axel wire changed the handle not much by having changed into a single character.
Although it could be used without the problem and a carburetor change was made in PC20 the other day PE24, it was able to be used without the problem.
We are a shorter axel wire and it is recommended in the direction of search about a normal look thing.
View detail