Reviews
Pipe Handlebar/Clamp, but as a Fog Lamp/Clamp.
I was looking for a clamp for the Fog Lamp, and since the Pipe diameter is 22mm and it is an M10 Bolt, I thought it might work, so I did some research and found that it might work, so I purchased it.
I wanted to hang it straight down from Clamp, so I was satisfied.
Of course, Bolt and Nut are purchased according to their length at the time of installation.
View detail
Handlebar Up Type changed to long wire
The product is for MONKEY, but it can be used with Super Cub custom Handlebar Up TypeSpec. and it is good to replace it with stainless mesh. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
OK for Universal
[How is it used?
I chose this one because my current Switch was not working well and I wanted to replace it.
I chose the cheapest price, and I trust Minimoto products to a certain extent because they are not that hit or miss, but they are not that miss either.
Was the one you received as per Image?
It is exactly as shown in the image. It is not as chunky as I had imagined.
Was the installation difficult?
Instruction Manual included.
How was your experience with it?
I thought the lights were going bad because of the Switch box, but it didn't change when I changed it. It seems to be the Harness on the body side. It's so lame....
[Included Parts:were they on?
Instruction Manual was included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wiring is made quite long, so it is also Universal.
View detail
Inexpensive, but the texture is good.
This product was changed from HondaJAZZ OEM. All you have to do is remove the Nut on the back, remove the OEM, and install this product with the included screw. It looks great and shiny. The only thing is that the height is the same as the OEM, so it would have been nice if I could have bought one size larger (missing). View detail
a little cheap-looking
Bought it to make a Bar handle for HondaTODAY.
Spec. so there is no problem to install.
It looks a bit cheap.
The price is right, so I'm satisfied.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
The product is a good one
I wanted to use PASSOL as a squeezing handlebar, so I diverted it It is easy to fit in Cover if it is a little more thin meat It is easy to fit in the cover if it is a little more flesh View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's not a special product, but it comes on properly
I bought this because I wanted to put on a squeezed hand
It hits the Cover a little, but it fits somehow Processing is not necessary, but a little effort is needed for installation
View detail
There is no problem in particular
I was anxious at first but I do not want to put a burden on Battery
I tried putting on damages.
When light is turned off, 0. Voltage rises from 5v to 1v
Passing was done at Switchoff
Perhaps I think that anything goes well with H4.
View detail
Satisfied with Cost performance!
I installed it in DF125 DJEBEL. Headlights on IgnitionON are older types, so we made it simple switch. This model was made in the direction where Cost, Cable appears (Direction in which rain does not enter downward when attached to Handlebar) I decided it.. I also owned 250 American, and I installed a device that turns on with High beam (This is a very well done circuit in this way) , Passingor High beam requires an operation to switch for a moment, so if you have to switch at all times
The use period is short, but there is also a current carrying capacity (By manual) I think that it can be used without problems. Rather than buying Parts and making it for myself, Cost, I am satisfied with the Cost performance considering the trouble.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100
I think Cool in Simple
Because the installation is not good, because the inside of the Fork is short in dimensions, if the Rubber of about 1 mm is not caught, the Front tire does not turn, I like Rubber scissors, no problem, it is pretty cool so I like it. View detail
Affordable Custom
Because it changed to Large texture Carburetor, it became impossible to correspond with Normal cable, so we chose Cable exchange by looks and functions. Installation was easy. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
It's cheap but you can use it.
Parts were cheap as CUB's Bar handle became, so purchase.
Although it is certainly a little complicated making, it is usable without problems.
Recommended for people who want to finish cheaply.
View detail
Purchased with HID
Engine purchased to reduce power at engine start
φ22. Used for 2 Handlebar
Installation is simple by cheating between Valve and Wiring from Body
Other Manufacturer also has the same goods, but this one was cheap, the Switch's Wiring was coming out from the bottom and I chose it because it was good as I looked.
Although it is making, I was a little worried about the fact that a frog is attached to the corner of Plastic, but it is within the range that I can endure because it is not noticeable from the Switch side
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla)
[Webike Monitor] Since the fixing position of the Digital meter was troubled when it was a pure Handle, it purchased by the Handle and a Set. When it attaches, it is satisfactory and was attached, and the Meter position was also decided and
[Webike Monitor] Since the fixing position of the Digital meter was troubled when it was a
pure Handle, it purchased by the Handle and a Set.
When it attaches, it is satisfactory and was attached, and the Meter position was also decided and is satisfied.
View detail