Reviews
It's not bad.
The lever position adjustment is a mechanism where the screw comes out and hits the base, so it is not possible to adjust without a tool. I would like to have a dial type adjustment like the brake lever.
The shape of the Lever is common, but I personally would have liked the cross section to be more rounded for easier gripping.
View detail
Fits: HONDA VTR1000FVTR1000F FIRESTORM, HONDA VFR800, HONDA VFR800XCROSSRUNNER 125, HONDA VFR800F
Lever of Leaning Type
Unlike the Touring type, it has a hard feel to the touch due to its angularity. View detail
I think the texture is good.
[How is it used?
I replaced it and ran about 150 km.
The shape of Lever is slightly different from NORMAL, but I soon got used to it.
Was the one you received as per Image?
Almost as Image.
Clutch lever is a little cheap in the Plastic part.
Was the installation difficult?
I am a beginner and it was very easy because there was a video of the exchange on Youtube.
I think anyone with 8mm and 10mm Wrench can do it.
How was your experience with it?
It looks good because we matched the color to the Fork and Wheel!
[Included Parts:were they on?
Grease is not included, so if you don't have it, you should buy it.
[Was there anything that disappointed you?
Plastic part of Clutch is cheap.
View detail
Holder appears, who is Rust getting when he opens the box.
I opened the box and found a Rusting Holder in it.
Maybe they were trying to make it in time for the holidays,
Obviously it's used, so I think people will be angry.
View detail
For XSR155 is not compatible with XSR125
Lever for XSR155 cannot be used for XSR125.
I bought it thinking that it would be diverted, but it didn't work.
The shape is different
The quality of the product is good, so I'll wait for the confirmation of XSR125 application before I buy it.
View detail
Universality is strict
If the car model is not sold with a dedicated kit, the installation adjustment is Large strange.
I installed it on SUPER SHERPA, but cut and Screwed and bent,
We finally arrived and are not satisfied.
If you do not mind a gap at the Handlebar End, you can put it on without modification.
View detail
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250
good item
Riding the Rebel 1100 raises the position of the uncomfortable steering wheel high. It's a great item because you don't have to change the steering wheel and you don't have to change the cable. It's just too expensive. View detail
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
good
looking good but its for light use not for hard rally use as its just plastic guard . will definately buy one with metal frame next time View detail
About HuOakDamperKit
Without recognizing what would be the HuOakDamperKit
I got it by mistake, but I'm not in a position to confirm the effectiveness of the installation yet, but will in the process of using it in the future.
I was puzzled by the fact that no explanatory material was included in the package when I received it.
Instruction Manuals are also available from other manufacturers at a lower price than this product.
please take good care of it
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X-SR, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SBasic, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, YAMAHA TMAX500, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA Axis Treat, YAMAHA N-MAX, YAMAHA N-MAX, YAMAHA MAXAM, YAMAHA MAJESTY250, YAMAHA JOG125, YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400, YAMAHA
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: SUZUKI DR 125 S, SUZUKI GN 125
Installation completed without problems!
I have a gs125e, which is a motorcycle that is not guaranteed to fit, but I found this product after returning it and looking up the manufacturer part number myself because I could not install another product that was guaranteed to fit. Of course, the installation was completed without any problem!
What is a little disappointing is that webike does not have OEM Product neatly researched and listed.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Handle position is better but critical Clearance
Installation is very easy and can be done by a woman alone.
The handlebar was moved forward by one bar, and the handle position was improved, which made it easier to drive long distances and alleviate knee cramps.
The problem is that there is no clearance between the handlebar and the tank, and if you cut it all the way to the Left, there is only a few millimeters of free space, and if you cut it all the way to the Right, it touches the tank. If the tank is knocked down, the handlebar will definitely dent the tank.
This place definitely needs improvement.
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Lever Replacement
Brake lever, I have been wanting to replace it for a while and was curious to buy this one.
After much deliberation over whether to go for the short or middle type, I decided to go for the middle type, which was in stock.
Looks and uses don't seem to be too bad.
View detail
Requires considerable processing
[How is it used?
The product is good, the angle can be adjusted freely.
Was the one you received as per Image?
That is correct.
K-factory's products are always of high quality!
Was the installation difficult?
It was super difficult.
It cannot be used normally without considerable processing.
Specifically.
The OEM key cylinder is secured with an anti-removal Bolt and cannot be removed without using destructive methods. ItsQuantity:It took me 2 days to remove the 2pc Bolt. hang it, heat it with a heater fan, and blow on it for about 10 minutes to melt the screw lock agent. In some cases, if the bolt does not turn even after heating, the OEM Top Bridge is cut and removed without removing the OEM CableBracket. (like a spring) must be removed to attach it to the Top Bridge here.
There is also no hole to fix the Handlebar Switch.
I don't think this is possible. Without any holes, the Handlebar SwitchBox cannot be fixed. Turn. You need to measure the position by yourself and drill the hole with Drill. If the position of the hole is slightly off, that's the end of it. The preparation for this is the Large thing.
Lastly, I think the fact that it does not come with a bar end is a bit odd, don't you? I installed it by modifying DAYTONA's bar end for 14mm. It is not usable without past.
The above is almost impossible to install without PRO or considerable skill.
There are many tools to use and experience is required.
How was your experience with it?
Installation was difficult, but Position is easy.
[Included Parts:were they on?
Instruction Manual only but it is hard to understand.
[Was there anything that disappointed you?
No Handlebar Switch fixing holes
It took a lot of time to process.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Need 32mm Socket to remove Stem Nut.
It is likely to destroy the OEMBridge.
View detail
Fits: KTM EXC 125, KTM EXC 200, KTM EXC 250, KTM EXC 300, KTM EXC TPI 150, KTM EXC TPI 250, KTM EXC TPI 300, KTM EXC-F 250, KTM EXC-F 350, KTM EXC-F 450, KTM EXC-F 500, KTM SX125, KTM SX250, KTM SX 150, KTM SX 300, KTM SX-F 250, KTM SX-F 350, KTM SX-F 450, GASGAS MC 125, GASGAS MC 250
Purchased as spare parts
Purchased as a Racer spare part.
I heard that AWORKX is a manufacturer in Austria, but I was not familiar with it and this is the first product I bought.
Since the current Lever is fine, I have not replaced it yet and am not sure how it feels. I am sure it is normal.
View detail