Reviews
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Easy to use
I think this product is easy to use. The price seems a bit high. View detail
Fits: HONDA Rebel250 S Edition, HONDA Rebel250 S Edition, HONDA Rebel250, HONDA Rebel1100 DCT, HONDA Rebel500, HONDA Rebel250
good item
Riding the Rebel 1100 raises the position of the uncomfortable steering wheel high. It's a great item because you don't have to change the steering wheel and you don't have to change the cable. It's just too expensive. View detail
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
RnineTPosition improvement
Slightly improve Position.
The only thing I was concerned about was the width of the handlebar, so I decided to replace the handlebar to make it even more effective.
View detail
good
looking good but its for light use not for hard rally use as its just plastic guard . will definately buy one with metal frame next time View detail
About HuOakDamperKit
Without recognizing what would be the HuOakDamperKit
I got it by mistake, but I'm not in a position to confirm the effectiveness of the installation yet, but will in the process of using it in the future.
I was puzzled by the fact that no explanatory material was included in the package when I received it.
Instruction Manuals are also available from other manufacturers at a lower price than this product.
please take good care of it
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X-SR, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SBasic, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, YAMAHA TMAX500, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA Axis Treat, YAMAHA N-MAX, YAMAHA N-MAX, YAMAHA MAXAM, YAMAHA MAJESTY250, YAMAHA JOG125, YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400, YAMAHA
Too hot.
It was installed on a VST 1050.
Installation is a relatively simple process that can be completed as long as the power supply from the car body is available. The thin seat shape makes the grip feel very comfortable.
I tried it on a March run at about 10 degrees Celsius and it warmed up quickly with Switch-on.
I thought it was warm, but soon it became as hot as if I was holding a hot can of coffee, and I turned off the Switch after about 5 minutes. After that, I would put it back on when my hands got cold.
It is probably at about 70 degrees, but I was concerned that this would damage the Grip's Rubber if used for long periods of time.
Also, the power consumption is about 30w, which is about the same as Headlight, so it may not be suitable for SmallEngine Displacement Volume, which is limited in the amount of power it can generate.
It would be appreciated if the temperature switch could be set to high, low, or off.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: SUZUKI DR 125 S, SUZUKI GN 125
Installation completed without problems!
I have a gs125e, which is a motorcycle that is not guaranteed to fit, but I found this product after returning it and looking up the manufacturer part number myself because I could not install another product that was guaranteed to fit. Of course, the installation was completed without any problem!
What is a little disappointing is that webike does not have OEM Product neatly researched and listed.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI Z650RS, KAWASAKI ELIMINATOR
Handle position is better but critical Clearance
Installation is very easy and can be done by a woman alone.
The handlebar was moved forward by one bar, and the handle position was improved, which made it easier to drive long distances and alleviate knee cramps.
The problem is that there is no clearance between the handlebar and the tank, and if you cut it all the way to the Left, there is only a few millimeters of free space, and if you cut it all the way to the Right, it touches the tank. If the tank is knocked down, the handlebar will definitely dent the tank.
This place definitely needs improvement.
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
slightly short
The OEM Product No. was checked and it fit, so I purchased it, but it was about 10 cm too short. View detail
Lever Replacement
Brake lever, I have been wanting to replace it for a while and was curious to buy this one.
After much deliberation over whether to go for the short or middle type, I decided to go for the middle type, which was in stock.
Looks and uses don't seem to be too bad.
View detail
Requires considerable processing
[How is it used?
The product is good, the angle can be adjusted freely.
Was the one you received as per Image?
That is correct.
K-factory's products are always of high quality!
Was the installation difficult?
It was super difficult.
It cannot be used normally without considerable processing.
Specifically.
The OEM key cylinder is secured with an anti-removal Bolt and cannot be removed without using destructive methods. ItsQuantity:It took me 2 days to remove the 2pc Bolt. hang it, heat it with a heater fan, and blow on it for about 10 minutes to melt the screw lock agent. In some cases, if the bolt does not turn even after heating, the OEM Top Bridge is cut and removed without removing the OEM CableBracket. (like a spring) must be removed to attach it to the Top Bridge here.
There is also no hole to fix the Handlebar Switch.
I don't think this is possible. Without any holes, the Handlebar SwitchBox cannot be fixed. Turn. You need to measure the position by yourself and drill the hole with Drill. If the position of the hole is slightly off, that's the end of it. The preparation for this is the Large thing.
Lastly, I think the fact that it does not come with a bar end is a bit odd, don't you? I installed it by modifying DAYTONA's bar end for 14mm. It is not usable without past.
The above is almost impossible to install without PRO or considerable skill.
There are many tools to use and experience is required.
How was your experience with it?
Installation was difficult, but Position is easy.
[Included Parts:were they on?
Instruction Manual only but it is hard to understand.
[Was there anything that disappointed you?
No Handlebar Switch fixing holes
It took a lot of time to process.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Need 32mm Socket to remove Stem Nut.
It is likely to destroy the OEMBridge.
View detail
Fits: KTM EXC 125, KTM EXC 200, KTM EXC 250, KTM EXC 300, KTM EXC TPI 150, KTM EXC TPI 250, KTM EXC TPI 300, KTM EXC-F 250, KTM EXC-F 350, KTM EXC-F 450, KTM EXC-F 500, KTM SX125, KTM SX250, KTM SX 150, KTM SX 300, KTM SX-F 250, KTM SX-F 350, KTM SX-F 450, GASGAS MC 125, GASGAS MC 250
Purchased as spare parts
Purchased as a Racer spare part.
I heard that AWORKX is a manufacturer in Austria, but I was not familiar with it and this is the first product I bought.
Since the current Lever is fine, I have not replaced it yet and am not sure how it feels. I am sure it is normal.
View detail
Blinker is hard to operate.
We had been using Komine's Neoprene fabric, but it was deteriorating badly over time, so we decided to replace it.
The previous version had a large hole in the Grip section so that the BlinkerButton could be inserted into the Cover, but this version does not allow it.
When I try to operate the Blinker through the Cover, it presses the HornButton.
My Motorcycle is a 2019 HondaCB650R
I don't know if it's because the BlinkerLever and HornButton positions are reversed on recent Honda Motorcycles.
View detail
Size is Exactlyw
As expected, the size is Exactly because it is a dedicated product.
I was able to stick it exactly, but the next day Air was … missing in places.
It is only a Protect, not a Knee grip application. I was kind of hoping for a ….
I am considering another one.
I am thinking of putting it on top of this.
View detail
Short may be too short?
Only the movable part of the lever was replaced because I didn't like the thick feeling peculiar to bremboLever.
I selected Short, but it is much shorter. It's just enough to get your middle finger over the end, index and middle finger Quantities.:It is just about right for 2pcs. Personally, I thought it was too short, so I will buy a Middle.
View detail
Fits: KAWASAKI Z 1000, KAWASAKI Z 1000, KAWASAKI ZX 6 RR, KAWASAKI ZX 6 RR, KAWASAKI ZX 6 R, KAWASAKI ZX 6 RR, KAWASAKI ZX 6 R, KAWASAKI ZX 10 R, KAWASAKI ZX 10 R, KAWASAKI ZX 10 R, KAWASAKI Z 800, KAWASAKI Z 750 R, KAWASAKI Z 750, KAWASAKI Z 750 R, KAWASAKI Z 1000 SX, KAWASAKI Z 1000, KAWASAKI ER-6N
Ordinary movable Clutch lever
I bought it because I wanted to match it with brembo's Brake master.
Since it is just a Lever, there is nothing special about Clutch that makes it lighter.
As a Merit, is the movable type useful in case of standing moss?
Also, the lever shape seems square compared to the OEM,
Slightly easier to grip.
However, when I purchased it and received it, the color had peeled off a bit,
For what I paid 20,000 yen... I think.
View detail
I need a 2Finger.
The truth is that Quantity:I prefer 2pc seating, but only 3Finger is available, so I bought it.
It is about 2cmShort, but I don't feel much change.
When I tried to install it, it was not good enough, so I went back to 4Finger.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250RALLY, HONDA CRF250RALLY(S)
Purchased to change the front/rear position of the handlebar.
I bought this to move Handlebar forward.
The description of the product says that it is the largest 8-position, but this product has only one hole in the base, so it is a 4-position.
As a result, I was a little disappointed that it did not move forward as much as I expected.
CRF250RALLY had a problem that when standing on a hard slope, it would be in a position like hanging from a handlebar, and the arms would be cramped.
I was aiming to increase the degree of freedom of the upper body by moving the handlebar, which is shallow and low, forward together with this clamp kit, but it did not work as I had hoped.
However, I have no regrets because of the difference from OEM.
The bolt that holds the key cylinder in place is a special one that can only be turned in the direction of tightening, so it was necessary to make a hole in the bolt and remove it with an extractor. 。
This work is not recommended for those who are not accustomed to using electric drills and the like.
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125, HONDA , HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX
The terminal was broken so I reattached it and soldered it.
The connector connecting it to the battery was broken, so I was too lazy to just connect it, solder it, wrap it with electrical tape, and turn it on. It worked fine, so I just installed it and used it. The fever doesn't rise quickly, but it seems to take about 2 minutes. Still warm. A little thicker than the original grip. It's pretty good. Works well with CT125. -------------------------------------------------- -------- The connector connected to the battery is broken, so it's bothersome, so it's bothersome to connect, soldering, wrapping up the electric tape and turning it on. The fever doesn't come up quickly, but it takes about 2 minutes. Still warm. A little thicker than genuine grip. It's okay. Good with CT125. Powered by Google Translator View detail