Reviews
Difficult to install.
Unfortunately, it is difficult to install on the DL1000 V-STROM800.
I've been saved a lot by SEROW, so I have excellent credit.
View detail
Let's make sure we get it right.
I can't return it because I opened the package and I can't return it. Yamaha does strange things with different VIN numbers even though they are the same year. I think it's a good idea to check before you buy, but I also think it's a good idea to write Small letters at the bottom of the page. View detail
So bad
Wire adjustment screw on handlebar side of 1 pc out of 2 is not tightened from the beginning.
When I tried to remove the protective cover of the middle wire adjustment, the Outer Crimp on the adjustment bracket fell out.
It's a shame because I have been using Active's High Solo for a long time on another motorcycle and I trust it.
View detail
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
Not included with DR-Z400
It may be good for other Motorcycle, but I can't install it on DR-Z400s. the Bolt hole position was off by about 4-5mm.
I am disappointed because I bought it because it was conforming.
I would like to return it but it is too much trouble to send it back so I will throw it away.
Everyone please take note.
View detail
So bad
Brake lever adjustment dial is as good as none, almost no change.
Was it defective?
The fit check was fine, but the product was disappointing.
Is it unburnable Garbage because it has passed the return deadline.
View detail
Could not be installed.
I tried to install it on my 1997 YZF1000R 4SV, but the inner wire on the side that opens the Axel was too short to install...
The one with the bent tip in the second photo is the Throttle Cable removed from the car body.
I worked on it believing it to be a product with webike's conformity guarantee, but in the end I could not replace it...
View detail
SEA BASS SV650 Cannot be installed.
I bought this to install on my SV650, but it did not attach.
This product is available in two Handlebar thicknesses:Large and Small.
The handlebar on the SV650 uses the larger one for the steel handle, but the inside diameter is a limit.
There is a small projection inside the handlebar of the SV650, which prevents the bar end from going in.
I think I can do it by eliminating the protrusions inside the handlebar by putting a file on it or something, but ….
I tried the smallest one for aluminum handlebar, but it is too small and cannot be fixed at all.
I couldn't install it, so I'm giving it a 3 for texture etc.
View detail
defective
It is perfect as a Grip heater.
However, there is a terrible flaw in that the Switch cover falls off due to vibration while driving.
Moreover, there are no replacement parts and the entire body must be replaced.
View detail
One-time use, disposable Guard.:I should have bought Aluminum.
I put it on my en Duro bike. This is the first touring after the installation,
Damage that falls to the Right Side while standing in Side Stand on gravel and receives an apparent Shock.
Later that day a second fall to the Right Side cracked the Guard on the end side.
You should not buy this.
Even if the fall is not serious, it will look bad because it will be cracked.
View detail
This is no good.
It looks a little cheap, but it is acceptable!
I bought this product again because I had a problem with the Hazard switch after installing the first one and it was a hassle to return and exchange it!
I installed it again, no problem, and touring with peace of mind. The second time I pressed the Cell button, smoke came out of the switch box!
I had to cut and attach an OEMSwitch box and will never purchase again!
View detail
Fits: YAMAHA T-MAX 530, YAMAHA T-MAX 500, YAMAHA T-MAX 560
Rai TECBrake Lever Set
The bracket that the brake switch is pressed into did not fit, so I had to cut it off.
When not Braked Normal time. Brake switch cannot be pressed completely and ABSLamp remains lit and Cruise Control is also Quantitative.:It cannot be set and is scrap iron. It is no good.
After all, it has to be JAPAN….
View detail
Fits: HONDA CB400SF, HONDA CB400 SF Ver.S -98, HONDA CB400 SF Ver.R -98, HONDA CB400SF
Shorter than OEM and unusable.
Same length as OEM, but shorter and less useful View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
Used for SUPER CUB 110PRO
I bought this to improve my re-grip, but was suddenly disappointed with the same diameter as the OEMNORMAL Throttle, what is High Solo about this?
I was expecting this because it is a Manufacturer of Aftermarket parts that I often see, but I got the same impression as if I had grabbed a Chinese-made Inchki product.
Was KITACO such an InchkiManufacturer?
Instead of recommending them to my friends, I vowed never to buy KITACO products again.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cross Cub 50, HONDA cross-cub 110
If you try to fit it in when it's cold, it rips.
When I tried to fit it, it ripped and was destroyed before I could use it. View detail
Fits: HONDA CRF250L, HONDA CRF250L(s), HONDA CRF250RALLY, HONDA CRF250RALLY(s)
Large Strong?
Bent by a standing bender, the Brake lever was damaged.
It is sad.
View detail
Large Strong?
It is a comfort. Even standing still is not enough. View detail
Fits: YAMAHA MT-09, YAMAHA YZF-R1M, YAMAHA YZF-R6, HONDA CBR1000RR, HONDA CBR600RR, HONDA HORNET600, YAMAHA FZ-6N, YAMAHA FZ6-S FAZER, YAMAHA FZ-8, YAMAHA FZ-8 FAZER8, YAMAHA MT-07, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, HONDA CBR600RR, HONDA CBR1000RR
Clutch lever
Clutch lever, the picture and the Cinnamo's are different. View detail
It was a defective item
[How is it used?
Touring, city driving
Was the one you received as per Image?
It was a defective item
Was the installation difficult?
It was a defective item
How was your experience with it?
It was a defective item
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
It was a defective item
Opinions and requests to Manufacturer
It was defective, I consulted webike and returned it.
View detail
This is a lousy product. DR-Z400SM users should not purchase this product.
I purchased one for my DR-Z400SM.
I bought it because it is a Stainless Mesh case with good parenthesis, and although it is expensive, it is made in Japan, but the shape is totally different from the OEM Throttle case.
The WireGuide did not fit into the case at first, so I had to shave the part where it hit the case with a Belt Thunder in several places and managed to get it in. The Throttle tube was caught and the Axel could not turn.
On the carburetor side, the angle of the Pull Side Guide was more bent than the OEM, so we put it in a vise to make the angle shallower and the angle the same as the OEM.
Although we managed to turn Axel by processing it, we decided not to use this Accelerator Wire because we were worried about it.
Even a cheap, no-name Chinese Throttle Cable is at a level where it can be used by simply popping it in, but it is unusable without considerable modification.
It also took about 3 weeks to arrive and I was looking forward to it, but I feel like I threw away a lot of time and Gold.
I will never buy another product from this Manufacturer.
Oh, only the length was the same as OEM, lol.
View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
This is disappointing to KITACO.
Material is also terrible.
What is wrong with KITACO these days?
Disposal.
View detail