Reviews
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Nice upgrade
They will fit. They fit in the factory perches as good as the factory levers, and do fit behind the factory handguards with plenty of clearance. They are a well made product. Best levers I've ever owned. Crashed multiple times in hard pack, and soft conditions. They haven't even deformed. Will purchase for every dirtbike I own moving forward. View detail
Fits: GASGAS EC-F125, GASGAS EC-F350, KTM XC-W125, KTM EXC-F125-500, KTM EXC-F500, KTM EXC-F125, KTM XC-W500, KTM EXC500, KTM EXC125-500, KTM EXC125, GASGAS EX-F125-350, GASGAS EX-F350, GASGAS EX125, GASGAS EX125-350, HUSQVARNA TX125, HUSQVARNA FE125-501, HUSQVARNA FE501, HUSQVARNA FE125, HUSQVARNA TE501, HUSQVARNA TE125-501
Vibration absorption!
I used the Handlebar Post and anti-vibration one I bought on AliExpress for 6 months, but I was concerned about wobble, so I bought the PHDS in Black, the same black as OEMPowerParts.
[Good points]
1.No wobble! Decreased vibration at high speeds!
2.18mm higher than standard with Spacer
[The bad]
3.Anodized black color, so it has purple color and not OEM black color.
4.Option "Spacer" is not OEM compliant.
Also, Torque wrench is required for installation.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
Unbreakable Lever
I installed it on my gasgas EC250 which I always use for forest road touring.
With the NORMAL Lever, the supplemental grip was not comfortable, so I purchased this Lever.
As a result, the grip is improved and Lever is easier to operate.
It is also foldable, which makes it difficult for the lever to break, and reduces the number of problems when touring on forest roads.
The quality is very good and Parenthesis good Lever.
However, the price is very high, so the cosmetics are not very good.
View detail
Fits: HUSQVARNA FE501, HUSQVARNA FE250, HUSQVARNA TE300, HUSQVARNA TE150, HUSQVARNA FE250-501, HUSQVARNA TE150-300
As Repair Lever
[How is it used?
I play mainly in Enduro race with HUSQVARNA TE250I.
I broke the brake lever during a practice run.
Pivot Lever Purchase
Was the one you received as per Image?
Installation can be easily done without removing the OEM lever.
The texture feels a little cheaper than previous Aluminum models, but it feels good to hold.
It was a little more Short lever style than OEM, which was surprisingly good for me.
I think this will alleviate the worry of it breaking in the event of a fall, but I haven't fallen over it yet, so I'm not sure how durable it is.
View detail
Fits: KTM EXC 125, KTM EXC 200, KTM EXC 250, KTM EXC 300, KTM EXC TPI 150, KTM EXC TPI 250, KTM EXC TPI 300, KTM EXC-F 250, KTM EXC-F 350, KTM EXC-F 450, KTM EXC-F 500, KTM SX125, KTM SX250, KTM SX 150, KTM SX 300, KTM SX-F 250, KTM SX-F 350, KTM SX-F 450, GASGAS MC 125, GASGAS MC 250
Purchased as spare parts
Purchased as a Racer spare part.
I heard that AWORKX is a manufacturer in Austria, but I was not familiar with it and this is the first product I bought.
Since the current Lever is fine, I have not replaced it yet and am not sure how it feels. I am sure it is normal.
View detail
Fits: GASGAS EC-F125, GASGAS EC-F350, KTM XC-W125, KTM EXC-F125-500, KTM EXC-F500, KTM EXC-F125, KTM XC-W500, KTM EXC500, KTM EXC125-500, KTM EXC125, GASGAS EX-F125-350, GASGAS EX-F350, GASGAS EX125, GASGAS EX125-350, HUSQVARNA TX125, HUSQVARNA FE125-501, HUSQVARNA FE501, HUSQVARNA FE125, HUSQVARNA TE501, HUSQVARNA TE125-501
Bye bye numb hands
KTMs vibrate a lot.They provide a reduction in vibration. Of course these big four strokes vibrate horribly. This cut vibration in half My hands go to sleep way less with these. I was very skeptical but I did a 6 lap warm up moto and was shocked. Warm up moto is usually 1.5 maybe 2 laps and my hands are asleep.I'm using it with neken handlebars,xstring triple tree and scott steering damper, it's a nice upgrade.They are pricey. But I would buy again. View detail
Fits: BETA RR X-trainer full size, BETA RS X-trainer full size, HUSQVARNA FC250-450, HUSQVARNA FC250, HUSQVARNA FC450, HUSQVARNA FE250-501, HUSQVARNA FE250, HUSQVARNA FE501, HUSQVARNA TE 250, HUSQVARNA TE 300, KTM EXC, KTM EXC-F, KTM SX, KTM SX-F, SHERCO SE, SHERCO SEF, SHERCO SER, SHERCO SR
Lever, which seems to be unbreakable.
Brake and Quantity on 350EXC-F:Mounted with Set.
With the Clutch, the circle at the end is so large that when I put one finger on it, it hurts a little when it hits the other fingers.
Also, the adjustment nut tends to loosen easily, so it is more secure to fasten the nut from the opposite side.
I am using it together with Hand guard, so I don't think it will be effective, but I will use it as a tranquilizer.
View detail
Fits: KTM 150XC-W, KTM 125XC-W, KTM 450XC-F, KTM 350XC-F, KTM 250XC-F, KTM 250X, KTM 125XC, KTM 500EXC-F, KTM 450EXC-F, KTM 500EXC, KTM 450EXC, KTM 350EXC-F, KTM 250EXC-F, KTM 300EXC, KTM 300EXC TPI, KTM 250EXC TPI, KTM 250EXC, KTM 150EXC TPI, KTM 450SX-F, KTM 150EXC
rebuying (e.g. a loan)
I had to buy a new one because it was bent after a fall at Race.
The exterior is Orange, so it matches the exterior.
I have no hesitation in purchasing ZETA's Lever because it looks good and is easy to operate.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC250, HUSQVARNA FC350, HUSQVARNA FC350, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FE250, HUSQVARNA FE350, HUSQVARNA FE350, HUSQVARNA FE450, HUSQVARNA FE450, HUSQVARNA FE501, HUSQVARNA FE501, HUSQVARNA TC125, HUSQVARNA TC125, HUSQVARNA TC250, HUSQVARNA TE150
It can be used in the same way as OEM.
It does not have any special features and can be used without problems just like the OEM. View detail
Fits: KTM 150XC-W, KTM 125XC-W, KTM 450XC-F, KTM 350XC-F, KTM 250XC-F, KTM 250X, KTM 125XC, KTM 500EXC-F, KTM 450EXC-F, KTM 500EXC, KTM 450EXC, KTM 350EXC-F, KTM 250EXC-F, KTM 300EXC, KTM 300EXC TPI, KTM 250EXC TPI, KTM 250EXC, KTM 150EXC TPI, KTM 450SX-F, KTM 150EXC
Last Custom Parts
The KTM I used to drive was also installed.
I bought the Lever because I feel more comfortable with its grip than the brembo OEM and it's easier to handle in Race. I won't be able to race until next month, but I'm looking forward to riding the full custom.
View detail
Fits: KTM 125SX, KTM 125XC-W, KTM 150SX, KTM 150XC-W, KTM 250EXC-F, KTM 250EXC-F, KTM 250SX, KTM 250SX, KTM 250SX-F, KTM 250SX-F, KTM 250XC, KTM 250XC, KTM 250XC-F, KTM 250XC-F, KTM 250XC-F, KTM 250XC-F, KTM 250XC-W, KTM 250XC-W, KTM 300EXC, KTM 300EXC
Used for HUSQVARNA TE250 2016
I purchased it because I used the Clutch lever broken.
The portion hitting the finger of Lever felt wider than the OEM.
I thought that I wanted a fit feeling of the finger a bit more curved.
View detail
Fits: HUSQVARNA TE511, HUSQVARNA FE501, HUSQVARNA TC250, HUSQVARNA FE350, HUSQVARNA FC250, HUSQVARNA TC125, HUSQVARNA FE250, HUSQVARNA FS450, HUSQVARNA FC450, HUSQVARNA WR125, HUSQVARNA TE125, HUSQVARNA TE250, HUSQVARNA FE250, BETA X-Trainer 250, BETA RR2T 250, HUSQVARNA FE501, HUSQVARNA FE350, KTM BREMBO 125-530 XC-W 06-17, HUSQVARNA TE300, KTM 450 Rally
[Webike Monitor] It has structure which moreover does not break easily at a low price than brand-name parts. It is felt light that it is easy to grasp the form of the Lever. The span of adjustable range is also widely easy-to-use.
[Webike Monitor] It has structure which moreover does not break easily at a low price than
brand-name parts.
It is felt light that it is easy to grasp the form of the
Lever.
The
span of adjustable range is also widely easy-to-use.
View detail