Reviews
Good vibes
Used to turn a KX85 Handlebar from an OEM 22.2 iron Handlebar to a 28.6 PROTAPER Taper Bar, also a PROTAPER Clamp OversizeHandlebar Mounting I was also happy with the Clamp, but I was not sure if it could be used with the KX85 because it said "rubber mount" and I was not sure if it could be used with the KX85. The quality of the Clamp is quite good, but the bolt that comes with the Clamp is not as good as the OEM bolt, so I used the OEM bolt. The position of the clamp is not so good, because it has to be raised by 20mm with this clamp. The size of the handlebar must be chosen with this 20mm increase in mind. View detail
no problem
The handlebar position has been raised for easier standing, and the wires of the OEM product can be easily routed. View detail
Sturdy, 2 cm Up!
It's so stiff, and it's 2 inches up, so standing is a breeze! View detail
Used on Honda Grom
It wasn't difficult because I just removed the original one and installed this one.
I wanted to put a thick Handlebar on it, so I am very grateful for this kind of product.
It does not loosen after installation and is firm.
View detail
Good?
Cost performance is the best, quality, looks good, good purchase! View detail
Rugged Item
And didn't do with used to order the wrong product market and sold it, but mandeumsae is very robust, and to exactly made to the product. View detail
Simple easy to adjust outside the company Perch
Clutch perch comes out from several Manufacturers,
I bought this one that is not very easy.
You know Pro taper, external Perch can do common Notch adjustment.
For those who purchase these items for the first time,
I think it's better to check the structure.
Dust Boots is so hard that it was troublesome to pass through Thailand,
Installation does not require special skills.
In this Perch, simply tightening Screw will not cause Lever to return beyond a certain level
You can offset it according to the size of your hand, but the Lever ratio does not change.
It is still running a little but spa is a perfect Perch.
Compared to CRF 250 REM, there is no impression that it was lighter
I like this feeling when I grasp it.
As a point of note, since it is a product for competition vehicles, there is no Mirror Holder,
Also, webike says that it only handles for vehicles with hot starter.
Apart from the usual Assy another thing for Hot starter comes along so it is expensive.
MODEL without this Option is also Lineuped, so I'd like you to handle it.
I noticed it after I bought it ....
View detail
This is ... good things.
Clutch holder gorigori from when I purchased Motorcycle in second hand.
With disassembly it got worn out with stages, and I was using it as Grease up properly but thought that it was fluffy, I heard that there is a person who is also used for On road motorcycle, and I took the purchase of this item.
Rubber 's Dust cover was around and there was no change in the structure and structure, so it was easy to install.
As a feature, it is possible to adjust Bearing pressed into Lever and the pull of Cha Chi and Clutch Wire like Notch.
Also, as a remarkable point, this product can change the Lever ratio with Screw at the base of Lever. Thanks to this, I was able to use it without a sense of incompatibility at the depth of half Clutch, as good as OEM Product.
Because the thing itself seems to be sturdy, it is a product that seems to be going to be used for a long while using Grease up.
View detail
Buy Silver color Lever want it
I wanted to make Lever color Silver, so I bought it.
As you can see from the picture it is Polished and beautiful, I use Bearing for Pivot and I think Cost performance is high
View detail
Comfort Clutch
I bought it because I want to lighten Clutch operation
I listed the DRC UltraLight clutch and the candidates but made a good Pro taper
- The Thailand co-position was 3 mm shorter OEM ratio and the operating force was reduced
- Easy play adjustment
- OEMHand guard can be mounted with Small machining
- Mirror Holder diverted from DRC (Mounting hole into long hole)
- Clutch switch Short circuit required
Questity from 2 to 3 fingers for your own grip strength : 2 pc multiplied by OK
Stroke increased moderately and it became easy to clutch meat
Looks also good Parenthesis, ☆ 5 if you can choose Lever color, purchased Silver Lever separately and reserved the included BlackLever
View detail
It's a bulk clamp for the Fat bar!
Similar things came out from Zeta, too
If you take it with your hand, it seems that this one seems to be light
As you see "I made it seriously!" It looks like ^ ^;
I like Design and I've attached it.
Handlebar also made by Pro taper
I am in a good mood.. Finally our SEROW
It became one person. (Lol)
View detail
Although a thing which becomes light [ the other company ] was looked for, it purchased to the trial by saying with a Bearing. Or [ that this neighborhood is good for purchasing to a trial also in price ]. A feeling of operation of the circumference of a
Although a thing which becomes light [ the other company ] was looked for, it purchased to the trial by saying with a Bearing. Or [ that this neighborhood is good for purchasing to a trial also in price ]. A feeling of operation of the circumference of a Clutch actually changes suddenly! An original manufacturer's product stops getting used to the mind care again. It is a Recommendation absolutely. View detail
Before purchasing in order to make it PROTAPER EVO major diameter Bar from pure Bar of D trucker, the bar rise kit of ZETA was used, but I also become an accent of the circumference of the handle which is the mount made into the firmly of a price compared
Before purchasing in order to make it PROTAPER EVO major diameter Bar from pure Bar of D trucker, the bar rise kit of ZETA was used, but I also become an accent of the circumference of the handle which is the mount made into the firmly of a price compared with it, and think that it is very good. View detail