Reviews
For people who want to put it on and off frequently
Used with TENERE700 and OEMHand guard. 12v DC connection Type.
It is not for those who are looking for absolute warmth.
The amount of heat generated is not a problem, but the thumb inevitably gets cold since there is only half a circumference. If you use thick winter gloves with it, it is relatively comfortable up to an outside temperature of 6℃.
Also, because of the structure, there is a difference between the Heater and Grip, which may bother some people. It is acceptable for me because it is thinner than Type all around.
The beauty of this product lies in its ease of removal and attachment.
You can leave it on while touring etc., and when you want more control on forest roads or mountain passes, you can quickly remove it and ride your motorcycle with your usual grip comfort. Since the TENERE is a fat bar, you can fit the heater in the extra part of the handlebar to prevent it from coming off while riding.
Even if you don't, it is also a recommendation for those who want to remove it during the summer. The all-around Type is a pain to replace….
I think that Merit has increased with respect to the removal of some of the warmth that has been discarded.
View detail
Warmth beyond imagination
I had been holding out for Winter Gloves because the integrated Grip Heater was quite expensive. But when I found out about this product through a Webig DM, I decided to buy it, thinking that for the price, I wouldn't mind if it was a mistake. I had just installed a USB Socket for charging my phone, so I chose this product without temperature control.
I live in Kanagawa prefecture and tried it in today's high temperature of 9°C. It was warmer than I expected. I used to drive a BMW, and it is almost as warm as the BMW.
However, since it is a type that is placed directly on the grip, it is inevitably thicker, so the grip may feel uncomfortable. In particular, the Axel side turns to the front side as you drive, so you need to pull it back when you are waiting at a traffic light. It may be a little bit hard when driving in town, on a mountain pass, or when you frequently operate the accelerator by repeatedly opening and closing it all the way.
But even with that, I don't think I could change this warmth.
View detail
Quite simple
Installation is easy and it is warmer than I expected.
It is classy worthy of the Cost.
This is recommended for beginners, but the Grip ultra-thickness is undeniable.
Small hands, please be careful.
View detail
Easy to detach
Handlebar Cover and Quantity:If you install it with Set, your fingertips will not be cold at all.
The grip is a little thicker, but not that much of a problem.
Unfortunately, the temperature cannot be adjusted, but it is easy to install and can be removed when winter is over.
View detail
Easy to put on.
I like that it is easy to put on and easy to put back on.
It was about 12 degrees Celsius outside, and without it, my hands would get cold on long rides, but after putting it on, they stay warm enough.
It is a little minus in that regard, as it is thick enough to feel slightly bumpy in the grip.
View detail
First Grip heater
It is easy to attach and detach, and its shape fits easily with existing grips, so it can be used without slipping or coming off without tie wraps or other fixation.
It is not very effective when the wind is directly against it, but if it is used with a windbreak, there is no problem.
View detail
So so
As long as you have a USB power supply, it only takes a minute or two to install! The warmth is also quite good as it gets warm in less than 30 seconds. The only drawback is that the grips get thicker as a result… View detail
Operation check complete
Quantity:The Instruction Manual says to adjust the length of the 2pc cord, but the Tie Wrap is too tight to adjust. The Tie Wrap was so tight that it was embedded in the cord's clothing. I had to remove the Tie Wrap because it was too tight and it might become a resistance.
The grip will probably get used to it quickly. The warmth is also good.
View detail
Is good
The Grip is a little thicker, but it was not thick enough to bother me.
Grip heater with Grip replacement Type is good for winter, but in my case, I want to use the basic Grip that I like, so the easy removal is very convenient.
View detail
Super easy installation
I bought winter Gloves but after an hour my fingertips are dead.
I was considering Grip heater and found it.
It's super easy to install and remove.
It is used in conjunction with Knuckle Visor.
This will allow them to survive the winter.
View detail
at your ease
Installation was easy. However, since the grips were replaced, it was a bit more difficult since they are slightly thicker than the normal ones. The feeling of use is that it does not get very hot because the voltage seems to be a little insufficient since it is taken from KITACO's two USB ports. But I am satisfied because I could easily install it. The temperature does not drop that much because it is used in the Kansai region. If I were in a northern country, I would not be able to use it this way. View detail
Easy to put on and take off, but warm enough
I was thinking about a Grip heater because I really don't like cold hands in winter, and I was interested in this product because it is an easy spec. to wrap around the Grip with USB power supply. I read other reviews and thought it would be useful, so I bought it and installed it on my CT110 HUNTER CUB. In my case, the USB power supply of CT110 HUNTER CUB is 2Ampere and this Grip heater is more than 2.1Ampere, so I was worried because it is a little short. The way I wrap it around my hand, it hits my fingertips. Then I don't have Heater on my palm but I don't feel cold when my fingertips are warm. Also, it was more convenient that way because the distance to Brake lever didn't change. However, I use it on high because it is cold. I use it on high because it is cold. Medium or low is not good in temperatures below 10 degrees Celsius. I also use a hand guard to prevent direct exposure to the wind. I think it was a good decision to buy this product. View detail
Two units share a pontoon griffin
[How is it used?
Shared by CT110 HUNTER CUB (CT125) and Motoguzzi V7?
Was the one you received as per Image?
The heating element and harnesses are well made and seem to be durable.
How was your experience with it?
Connect to Motorcycle USB Socket (made by DAYTONA), Cigar socketType USB Socket and Phone Charging Battery. "strength" Riding around the city in 3SeasonGloves in MODE. It's so-so warm.
I think it is warm enough for 8 to 10 degrees Celsius outside, but it may be better than nothing in the middle of winter (I have not experienced it).
Easy to attach and detach heating element grips (easy to switch between two units).
The instruction manual says to use Tie Wrap Fixing after installation, but I don't have a Gap, so I use it without Tie Wrap.
The heating element is positioned to warm the base of the finger to the belly of the finger.
(Grip tends not to grip, so the belly of the hand does not warm up)
It can be used with a smartphone charging battery, so a motorcycle without a USB socket should be OK.
I purchased a 3-stage temperature control with Switch, but in the wintertime. "strength" Since I think it will only be used in MODE, I was happy with this inexpensive Series product without the temperature control Switch!
[Points to note]
It is not waterproof specification, so please be careful in the rain.
I'll do a start-up inspection to make sure the heating element cord on the Throttle side doesn't get caught.
How did it compare to other products?
I was also a candidate for the other company's product, which is a type of heat-generating Seat that is fastened with a String, but I decided on this product because it is easy to detach and attach when two units share a Seat.
View detail
For street riding
It's good for shopping and other small errands. View detail
Easy to install
Installation was easy, the grips are a little short, and the temperature seems a little low. The grips are a little short, and the temperature seems a little low afterwards. View detail
Grip heater
Installation was easy; Wiring took longer.
It warms up fast! The three-stage switching Switch is convenient.
View detail
First Grip heater
Purchased to equip CT110 HUNTER CUBCT125 in winter.
When worn at the same time as Komine's Handlebar Cover, summer Gloves temperatures below 5 degrees Celsius are not a problem when MAXMODE is in use.
To plug in the retrofitted USB, I used DAYTONA CONNECTOBoots + Tie Band for rain protection. It seems to be no problem.
The only concern is that the grip heater will make the grip diameter thicker, making it a little harder to grip.
View detail
A winter necessity for mainly city driving.
I was looking for a removable Grip heater, but this Clip type product seemed to be easy to install, so I bought it.
I installed it on my PCX150KF30 and it works fine without the Tie Wrap.
The grip is thicker, which makes it unsuitable for sports driving, as it makes your palms feel tight for a long time.
The PCX doesn't require much accelerator operation, so it's just fine, but I'll remove it when it gets warmer.
It is not designed to heat up the entire grip, so it is used exclusively for fingertips, but I use the Handlebar Cover with it, so I think I can handle it even in the middle of winter.
I connected it to the ServiceCoupler- using a DAYTONA USB power supply, but it was warm enough.
Now I just have to see how long it will last.
I should have bought it sooner.
View detail
It is easy to install, simple but effective
I thought it would be good if I could use it only in the cold season, and I thought about the electric heating Gloves at first, but from the experience that I bought and used the electric heating Gloves several years ago, I couldn't do anything when the battery ran out, and the battery part was bulky, and the fit was not good. Then, I considered the wrapping type Grip, and I decided here that it was easy to put on and take off, could be powered from USB, and could adjust the temperature.
This product fits directly into your Motorcycle's Grip and plugs into the USBJack for easy installation.
There is a bit of resistance when fitting the product into the Grip, so it fits tightly, but if it gapes during use, you may want to use a Tie Wrap to secure it.
I installed it on my Yamaha SCR, but the grip on the Left side shifted outward, so I used a Tie Wrap to keep it from moving.
By inserting this product, the grip (22.2?) of NORMAL becomes thicker.
It seems that there are many people who feel uncomfortable that the Grip becomes thicker, but I do not feel uncomfortable because the feeling that I gripped is about to become the thickness of the Inch grip (25.4?) of the Cruiser system.
It's the heating effect that's important, but it can be adjusted by switching between three levels.
I use Three seasonGlove in the daytime (temperature 15~18℃) of October-November beginning Low." From "Inside about (when it is cold in the morning) "strength" ), daytime (about 15°C) in November. "Inside From "strength" In the daytime (around 10 degrees Celsius) in December, the winter Glove "strength" It is used in
As you can see, in December, it's not as good as a replaceable Grip heater.
It's more than warm. "Lukewarm." But even with this product, my fingertips don't get itchy.
The Heater part covers about half of the Grip's circumference, so you can decide where to put it (palm or fingertip) according to your preference. By the way, I choose the position so that my fingertips don't get bitten.
The difficulty is Waterproof of the USB power supply part.
Because it is bare, it is necessary to take measures to waterproof the feeding part when using it in the rain (I refrain from using it in the rain).
View detail
I guess it's better than nothing.
Even on the highest setting, the part where the Grip heater hits is slightly warm, but the rest of the body is not warm, so it's better than nothing.
I think that the electric heating Gloves that warm the whole hand are more effective!
View detail