Reviews
I put it on for the winter cold.
CROSSCUB110 for winter cold (JA60) I put it on the
The product is so good that I don't feel the wind while driving with the LargeGuard.
Minus points for some people.
It will be tough for those who do not have the proper tools to tighten the Bolt that attaches the Guard to the Bracket. (Manufacturers do not recommend that amateurs install them themselves in the first place.)
I have no problem with this, because I don't do it myself. I don't do it myself, and if someone yells at me, I just bail and return the yay, so no problem.
It is recommended for those who want to protect themselves from the cold as Total!
View detail
Luxury!
Grom (JC92) I installed it in
The area is large, and protection can be expected to be quite good.
The surface is painted, so it does not have the cheap look of the Plastic ground.
Installation is also easy, as it is simply attached at the same time as Mirror.
Design has also been MATCHed and looks pretty good.
View detail
It looks Refreshing and cool.
Wiring can be managed by looking at the wiring diagram attached.
The Engine Starter Motor has a protrusion on the Case, so when installing it in the Handlebar, either drill a hole in the Handlebar or cut it out.
If you want to fix it properly, you should drill holes.
I drilled a hole.
Also, if the Screw is tightened too strongly, it will not return when the Cell is pressed, so adjustment is necessary.
If the Brake Clamp is also tightened too hard, the Brake lever will not return.
If you loosen this one until it goes back, the Clamp will not be fixed and will move.
It is dangerous that the Brake can not be fixed, so after much consideration, I decided to use the gap between the Handlebar and the Clamp Limit for the Wiring.
Insulation Tube (a thin tube that shrinks when heated) was inserted using Parts Cleaner and screwed closed.
There is only enough space for the paper, so we need to figure out a way to secure it.
In any case, I am generally satisfied with the results, despite some trial and error.
The quality and texture are 3 stars because of the need for the above devices.
The rigidity is 3 stars because it has only been a few days since installation, but the HandPost and other Gold genus components are solid.
View detail
OEM Color is happy
Large Knuckle guard
OEM Color is happy
It also provides good wind protection.
It is installed using Mirror Screws, but if it is used in conjunction with Windshield, which also uses Mirror Screws, you need to be rather careful.
If you don't tighten it tightly, it might become RoseRose while driving?
View detail
The quality is outstanding.
You answered my questions about the product and I bought it right away.
Easily interchangeable with OEMs, fitting and using the Handlebar from Universal Product.
This is an essential product to find a position that works for you.
The quality is high and I am happy with it.
View detail
Bracket is cheap
I attached it to 2 st off-road.
I bought this because I did not want a flashy Knuckle guard for cold weather and purpose.
Installation only bite Bracket to Mirror, so it was easy to install, including adjustment.
Windproof effect is better than nothing, but the coldness in midwinter somewhat softens. Dirtscene firmly guards Knuckle. Gap or broken by vibration etc. etc etc. There is not it for now. Surprisingly overall it is sturdy.
However, since Black Bracket is a Black color Steel which is sold cheaply even in Homsen, the side rusted on Suga.
I think that it is okay to use a little more care as the price is reasonable.
View detail
It's like an OEM
Kawasaki KSR 110 installed in Thailand MODEL 2013.
Since it was finished by Lime green with OEM paint color at Manufacturer, it became a feeling of fitting as if it was attached from the exterior as if it was an OEM.
Because I can not run expressways with two types of mopeds, the feeling of running on the general road clearly reduced the wind hitting the hand and the effect of Knuckle guard was recognized.
The installation itself was easy.
Clutch side (Clutch is not attached) In attaching, Bracket seemed to be in contact with the Chalk lever, so I moved Mirror Post about 1 mm to Right Side.
Also, as it is, the front extension with the Axel side is not aligned, so the shorter extension Plate is installed.
View detail
Mirror Adapter is required separately for CB 400 SB
Until now I was wearing Zeta 's Armor Handguard Bend and a dedicated Knuckle guard but I decided to remove them, so I bought this new Knuckle guard as a windshield.
Removing the Hand guard The reason for the biggest Large is Harness - Possibility of Damage to Wire etc..
Although it was a concern from the beginning of installation, since Clearance is quite severe and Harness passes through the outside of the Hand guard, if the Hand guard rotates with a fierce fall in case, there is a possibility of tearing Harness sort I thought.
If so, Lever is not damaged beyond damage, so I decided to remove the hand guard. I regret that I liked it.
Also, my reason is that my Sense has changed and resistance to these forms of Knuckle guard has gone away.
<How to install>
According to Title, CB 400 SB can not be installed with this product alone.
Instead of Bolt for tightening the Knuckle guard, separately M10 (Screw Diameter 10mm) The Mirror Adapter of Quantity : 2pc. Set is required.
I wanted to use OEM's blindfold Cap, so M10 → M10 Standard Thread Screw Adapter for height adjustment (1870 made by Takatsu) The was used.
In addition, commercially available M10 Rose Screw sold at Home center etc. is Pitch (Screw mountain interval) Although it fits, because the height of Screw mountain does not fit, it does not enter Mirror hole. be careful.
Mounting is easy, first with Mirror in the hole Material : Remove the plastic Blindfold Cap with Slotted screwdriver.
Place a Knuckle guard there, tighten the Mirror Adapter with a 14 mm Wrench, etc. and reinstall the blindfold Cap to complete it.
By the way, because this Knuckle guard is one point stopper, because it rotates and it is displaced during tightening, it is good to tighten while pressing with one hand.
CB 400 SB was able to be attached without using the attached extension plate.
When you fully lock the Handlebar, it makes slight contact with the Screen, but it does not matter as it bends a little bit.
Also you can hang Handlebar Lock before touching.
<Usability>
You can realize that it firmly protects the wind to the fingertip.
Of course it is helpless to the wind from the side so it is painful in midwinter alone, but if you combine with Grip heater you can run comfortably as before.
View detail
Measures against cold weather
I am using it with XL 1200 C SPORTSTER 1200.
By installing Knuckle guard and Grip heater
Midwinter Riding has also become comfortable.
Especially when running on a highway for a long time, the wind hitting the hands is also
It is considerably reduced.
Since it is slightly outside the width of the Handlebar, attention is required for contact when running in a narrow place.
View detail
Until normal installation, one ingenuity, two ingenuity was required
SR 400 attached to the 35th anniversary MODEL.
The effect is outstanding,
Kit comes with 2Size Bracket,
Since it is one at a time, if one side has Bracket, the other will need Bracket of the same length.
Quantity : Pair (for Left and Right) It becomes a different Length and Balance is bad.
Since Bracket is wide, it corresponds to Master cylinder.
This is avoided with the Mirror Adapter. Since Yamaha's Motorcycle is Opposite Thread Screw, Right-Handed Screw Adapter and Y's Gear's Normal Thread Screw Side Mirror Base are used, and Quantity : Pair (for Left and Right) Both are Normal Thread ScrewMirror.
Since Bracket sold also on Single Item, I ordered it.
So, with the same Length Balance was attached frequently.
But the other problem is.
Since it must be fixed at one point, the Knuckle visor loosens when it is running at high speed.
Loose and hit Lever, it will be very annoying with vibration.
For some reason Left Side only. Right had no problem.
Right may be because the direction the wind hits is the direction the Screw closes.
Left is a loose direction.
So let's chew on Spring washer and add Opposite Thread Screw to Adapter.
That is,
To Right Side, reverse → Right-Handed Screw Adapter + Normal Thread Screw Side Mirror Base (Standard for LeftSide Mirror Base)
Left Side is a positive → Opposite Thread Screw Adapter + Opposite Thread Screw Side Mirror Base (Standard's Right SideSide Mirror Base)
I will carry out a confusing installation called.
As a result, 100 km on the expressway / H It did not become loose even when cruising. When.
Quoted from your blog
https : / / kanjitalker. wordpress. com / 2015 / 04 / 22 / %e3%83%8a%e3%83%83%e3%82%af%e3%83%ab%e3%83%90%e3%82%a4%e3%82%b6%e3%83%bc%e3%82%92%e7%9d%80%e3%81%91%e3%81%9f /
View detail
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either. However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four sta
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either. However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four stars. View detail
- Although I think that it is based also on an attachment part, there is no protection-against-the-cold engine performance so much. It is possible to fix at , a high speed, etc., to such an extent that a wind is not equivalent to a fingertip. A
- Although I think that it is based also on an attachment part, there is no protection-against-the-cold engine performance so much.
It is possible to fix at
, a high speed, etc., to such an extent that a wind is not equivalent to a fingertip.
An insect adheres on a grand scale with an insect Attack at
and a high speed.
Since it is
and transparence, it is not conspicuous.
Form is rather good.
Since the hezagonal wrench 8 is required in
and mounting and fixing, please get those who are not.
View detail
In this goods simple substance, the Long touring of a winter season is impossible. What will generate heat if the cold is not felt for a fingertip if it is only 15 to 20 minutes, but (Glove use for winter) it becomes more than it is needed. It will
In this goods simple substance, the Long touring of a winter season is impossible.
What will generate heat if the cold is not felt for a fingertip if it is only 15 to 20 minutes, but (Glove use for winter) it becomes more than
it is needed.
It will be the strongest if there are the
disposable body warmer, especially a Grip heater!
View detail
The Glove was also changed into the thing for arctic cold, and the fingertip was still numbed, since it was painful, it purchased, but too, the fingertip of the day before and behind five air temperature is palsied with the run for 30 minutes, and it beco
The Glove was also changed into the thing for arctic cold, and the fingertip was still numbed, since it was painful, it purchased, but too, the fingertip of the day before and behind five air temperature is palsied with the run for 30 minutes, and it becomes painful.
Although it might be a thing with bad me expected too much, an effect to the extent that it considered was not acquired.
Or [ that it is effective if ten air temperature exceeds ].
Since the polite description attaches
attachment, anyone thinks that he is easy.
In the case of W800, it was able to set to the favorite position using the attached extended Stay.
Although it is a difficulty that height on either side is a little different, they are reliable goods, without blurring during a run.
View detail
Although goods are very good, since it does not cling only with accessories depending on a vehicle type, special Nut and a Washer are prepared and height control is required.
Although goods are very good, since it does not cling only with accessories depending on a vehicle type,
special Nut and a Washer are prepared and height control is required.
View detail
a palm -- although there was a Heater in a side and it was satisfactory, the shell got as cold as feeling is always lost. It discusses by the colleague and, first of all, he attaches. like the Cover -- it is not -- carry out -- it wa
a palm -- although there was a Heater in a side and it was satisfactory, the shell got as cold as feeling is always lost.
It discusses by the
colleague and, first of all, he attaches.
like the
Cover -- it is not -- carry out -- it was preeminent for the effect and cold stopped almost worrying it
View detail
Since a fingertip got cold, it hoped to prevent and purchased. Although it was a general-purpose article, the attached Parts was used and it has attached also with the KATANA. After attachment does not break down a Style so much for a Light smoke. Alth
Since a fingertip got cold, it hoped to prevent and purchased.
Although it was a general-purpose article, the attached Parts was used and it has attached also with the KATANA.
After attachment does not break down a Style so much for a Light smoke.
Although the last run was on December 27 and was still about 100 km, and the
effect was with the same way and Glove as last year, it has felt the protection-against-wind effect.
Distance does not increase more or the effect in high speed operation is not known yet.
View detail
Attachment was also easy and it was effective in it being unexpected also in this size. The coldness of a hand is also likely to be cancelable if there is a Grip heater or a Heat glove in midwinter.
Attachment was also easy and it was effective in it being unexpected also in this size.
The coldness of a hand is also likely to be cancelable if there is a Grip heater or a Heat glove in
midwinter.
View detail
Since the thing itself is not so large, a wind cannot necessarily be intercepted thoroughly. Since the heat source is not necessarily attached, it does not get warm. Also by , since a wind is not equivalent to a fingertip directly, it preve
Since the thing itself is not so large, a wind cannot necessarily be intercepted thoroughly.
Since the
heat source is not necessarily attached, it does not get warm.
Also by
, since a wind is not equivalent to a fingertip directly, it prevents the point of a hand getting cold considerably.
Rain also prevents only a few in passing.
If the
tool has two, an Open wrench and a hezagonal wrench, anyone can attach it easily.
It is quite convenient that desorption can be freely done for every
Season.
It is whether it was good for the range and vehicle type to attach to also spread, when it could do and there was however a Stay two merits and demerits at a time ...
View detail
It attached to 07 model VERSYS. Although one of the two stuck exactly by the attached Stay, die length was lacking and the opposite side purchased the suitable Stay in the Home center. Moreover, since the Bolt of attachment is short and there was starti
It attached to 07 model VERSYS.
Although one of the two stuck exactly by the attached Stay, die length was lacking and the opposite side purchased the suitable Stay in the Home center.
Moreover, since the Bolt of attachment is short and there was starting [ little ] to a Nut, the Bolt was changed.
Structure of the
main part is satisfactory.
Although a fingertip gets cold, if if there is nothing compares, a grade will end considerably lightly.
I think that it is good for the touch attached again not being conspicuous, either.
Since it is various for every vehicle type that it is necessary to add fine parts to its purchase, the degree of satisfaction about which it seldom cares is high.
Although I think that it is impossible, I think that the windshield effect may go up more if the height of attachment can be adjusted according to the position of a hand.
View detail