Reviews
Along with Handlebar replacement!
Replace the tight cable with a new handlebar,
This is perfect!
The texture is nice and satisfying!
View detail
Long fork and handlebar replacement!
Used for long fork conversion and handlebar replacement!
The texture is nice and LargeSatisfied!
View detail
Simple and good, but accuracy is disappointing.
It is a simple design and looks good on a custom motorcycle, but the feel of the switch is not good, and the precision is so poor that it locks up and stops working after use. View detail
This is Simple.
The Clamp part was unreliable and cracked.
It's a shame because it's cool.
View detail
The size you were looking for.
I've made it a HornButton in Custom'd CUB.
The pedestal is cut and drilled from Aluminum number.
The original Engine Starter Motor part is used.
Screw holes are made with Tapping to stop it.
I think I did a good job.
It's a light Touch, just right for the feel of the HornButton.
It was a good buy because it was inexpensive.
I recommend it to anyone who can process and use it.
View detail
Small and luxurious is perfect.
It can be easily installed in a small hole.
Although it is quite small and not conspicuous, it is assumed to be for HARLEY and has a sense of luxury.
However, it is not unbelievably expensive, and it is a good choice for the person who wants to differentiate from the low price thing in the similar Parts because it is a price range that is easy to get.
The durability is also quite good; there has been no noticeable deterioration after more than five years.
I lost it while driving just the other day, and I feared it might still be there, but I was relieved to find it was available for purchase.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's perfect for Refresh.
I bought this as a Refresh because the Bolt on my Switch box was rusty and not looking good.
OEMBolt is very expensive, but this one is cheap and can be used for OEM same etc.
It's good because if it gets rusty, you can easily replace it.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It is effective for Refresh.
I bought this as a Refresh for my Harley XL1200C SPORTSTER 1200 as the Bolt on the Switch box was rusty and not looking good.
The OEM Bolt is incredibly expensive, but this one is far less expensive.
I can use it normally without any problem, so if you are going to buy it, I would definitely recommend this one.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
You can Refresh Bolt!
I had a Timing to disassemble the Switch housing on my XL1200C SPORTSTER 1200, so I bought a Bolt to Refresh it.
The OEMBolt is older, so it had some White dulling and a little Rust.
I was able to Refresh by replacing it with this one.
It was good, especially since it was so visible.
Also, the Bolt will be changed from Torque to Hex, so it will be easier to do the next maintenance.
View detail
High cost performance
My car is a FATBOY by Harley-Davidson, a 2019 model. I lost a few screws on the handle, searched the original part number on the webike, and then bought this sub-factory. The quality is not said. High cost performance. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. Screw on the handle lost a few, the original part number on webike search, and then buy the deputy factory. The quality did not say. High cost. Powered by Google Translator View detail
no problem
I bought it because of Sports' pre-existing condition, Oil leaking from the root of the Clutch
The leak is gone, but how long it will last depends on luck
I'm not sure how effective the Clutch Cable itself is at replacing it, and it's normal for wear and tear
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's useful enough
I bought it for maintenance
It can be used for the same as the OEM Product, etc
Buying an OEM Product is expensive, even though it's just a Bolt
I am happy with this one as it is very inexpensive
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
Isn't that good?
I lost one, so I ordered it
It's not a torx screw, it's a hexagon, so it's only 1 pc different, and you'll need a tool to remove it I've had to change it
It's cheap, so you might as well change everything
View detail
Fits: HARLEY-DAVIDSON Others, HARLEY-DAVIDSON Universal
Low price and good quality
100% compatible with Grimeca master cylinders. I checked the operation and everything is satisfactory. Paint finish is also a great product. View detail
Cleaner and simpler handle around
Since it is drilled and installed, the skills of a professional are required. But the installation is easy and robust. And the handle around is clean and simple. Silver shines after all. View detail
good product!!
Easy way, easy installation, clean It is a perfect product with everything. Recommended for your purchase I used it as a start button The handle of my motorcycle was cleaner. It is the best product View detail
Fits: HARLEY-DAVIDSON 60-07 for Universal 41mmForkMODEL
Maintenance of Shovel's Steering
I bought it for Grease up of Shovel's Stem.
It is a story that the nail part is easy to break, so Quantity : 2 Set I bought it, but there was no play in the nail part, so I could install Well and there was not any problem.
View detail
Is it a bit fragile?
I used it for cell movement, but the Button part flew away where I got a tool hooked. So buy one more. I do not play a machine that hits it very strongly ,,,
Next time, I want to avoid breaking.
View detail
It is pretty Small swing
I bought it for the movement of Engine Starter Motor, but a much smaller switch arrived than I imagined. If it is, I think that embedding it in Handlebar is also an easy victory. It's cheap, and it looks bad, so it's Recommendation! View detail
Fits: HARLEY-DAVIDSON 60-07 for Universal 41mmForkMODEL
Purchased for Maintenance of Shovel
Purchase to try Maintenance around Front suspension and Steering. Making is not bad, but there were no claws in the photo. Well, something like this? Well, it will not be a problem since it will be used by returning, but I'm curious. View detail