Reviews
KIJIMA
Grip is the one! This is the one to choose! View detail
Used for DT50.
The cosmetics are good. The quality is not bad. 5mm shorter than OEM Product. View detail
Good design and ease of use
It was used for YAMAHA's DT250.
The design of this one is a Grip using VINTAGEMotocross, and it looks SO good.
In addition to its appearance, the grip is the most comfortable! The hand does not shake even when driving on rough roads, allowing you to drive with peace of mind.
The other day off-road driving was no problem!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
Easily attachable
During the restoration process, the grips were covered with mold and were so dirty that wiping them off with a military hand did not help, so I replaced them.
Moreover, the CUB-specific Quantity:Pair (for Left and Right) I cut it out and measured the thickness, because it seems to be the same thickness. It is written that the thickness may differ depending on the year and grade.
My vehicle is Quantity:Pair (for Left and Right) They were the same thickness. Thus, the choices were narrowed down.
The accuracy was slightly smaller than the Single Item measurement, so I blew on Brakes cleaner, pushed it in, and finished.
We have used this product in the past, and it is a trusted manufacturer, so we are comfortable with it. Grips are consumables, so we replace them when they wear out.
View detail
KIJIMAGrip sch RingTube
Grip heater protection and electronic Throttle is heavy so I wanted to make the Grip thicker.
The length and thickness are just right.
View detail
Classic Mini Rubber Grip
This is the first time I have purchased this product.
Fit feeling is good.
View detail
Handlebar Grip for people with Large hands
The cap at the end of the grip is screwed on from the inside, so it cannot be closed unless the grip is removed if it loosens.
Unfortunately, for some reason, there were two washers in the cap fixing area, and I could see rust on both washers. I think there is no problem with the function of the cap, but I was concerned about it, so I replaced them with Stainless washers.
The size is too large for LETS II, so 3DPrinter is used to create the intermediate color and mount it.
Supplement
The Grip end section with the Cap removed has a
Since the Gold Washer (I.D.Φ5) is Inserted, it would be difficult to attach another Grip end.
Dimension/Weight
Handlebar side:I.D. Φ22.2, 145g
Axel side:I.D. Φ25.5, 127g
Cap：30g
Length of Grip section only 102.5mm
View detail
Raw Rubber grip… I like it!
After reading the article by Webig, I thought Raw Rubber might be good … and since it was time to replace it, I chose it.
I have always thought that raw rubber is inexpensive and is not as good as branded products such as Pro grip's.
As the article says, both the grip and vibration absorption are quite good.
However, the durability of Raw Rubber is not so good, according to the review.
I wonder how long it will maintain this feel after use …?
But the feeling after starting to use it is really good.
If you have never used it, please try it once.
View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Buns Grip
It is easy to grip and Grip works well. View detail
Accelerator operation is now easier.
The grips on my long-time Honda LEAD125 have become slippery.
The NICE Neo Mini Rubber Grip has just the right texture and thickness of rubber to make accelerator operation easier. It was easy to put on. The price is reasonable and I wish I had replaced them sooner.
View detail
Good grip comfort
Compared to more than 10 years ago, the recent Grip has a softer feel, and the hard vibrations of a 2-stroke car are not transmitted as easily. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
Fits: Others , HONDA CB1100SF, HONDA CB125R, HONDA CB1300 SUPER FOUR, HONDA CB1300SB, HONDA CB1300SF, HONDA CB150R, HONDA CB223S, HONDA CB250F, HONDA CB250R, HONDA CB300F, HONDA CB300R, HONDA CB300R, HONDA CB400SB, HONDA CB400SF, HONDA CB600F, HONDA CB650F, HONDA CB650R, HONDA CB900F, HONDA CBR250R
easily control the throttle
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail
Unresponsive
Good product, but the response is not right, System should be improved. View detail
Good vibes
It is Exactly for old cars. I really like the way it looks. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
It is just the right length for CB1100!
[How is it used?
I wanted to change to a Classic design Grip to match the old car style Custom, so I replaced it.
I was worried about Raw Rubber, but Black Type seemed to last longer and was cheaper, so I decided to go with Black hoping for durability rather than fit.
Was the one you received as per Image?
It looks shiny in the image, but the actual one is not so much.
Was the installation difficult?
It was a little strange to remove the sticking bar end and grips, but if you remove them patiently, it was not so difficult to install them.
If the Grip is NORMAL or has not been replaced for a long period of time, CRC556 or similar is essential.
The finished product is almost the same length as the OEM Product, so it is just the right length and fits without discomfort.
How was your experience with it?
The Rubber is soft and easy to operate as I like its hardness.
[Included Parts:were they on?
Pack Cage ONLY and no other Included Parts:.
[Was there anything that disappointed you?
There was a small amount of BALI during manufacturing, but I didn't mind that much.
During installation, the EFFEX Bar End stuck and did not come off easily, leaving the Rubber and Bolt in the Handlebar Pipe.
We managed to rescue it using Wire and magnets, but the work took a LARGE width of time.
View detail
Replaced it with a Posh handlebar on my w650.
No vibration is transmitted! It is a great product, very comfortable.
View detail
Grip reinforcement is satisfactory
There are no problems with quality, texture, etc.
Design would like to see more Variation.
Well, it's ShrinkTube, so I guess it can't be helped.
View detail
Not only looks good, but is easy to use
This Grip looks good on old cars.
I installed it on my CB750Four2 and had trouble with heavy Axel operation, but the thicker grip and non-slip feel improved the operation.
View detail