Reviews
Rubbers have good texture.
YOSHIMURA YOSHIMURA Grip rubber set
Rubber texture is good and durable. The grip feels good in the hand. Available in two lengths, 115mm and 120mm.
View detail
The Yoshimura logo makes me grin.
The grips we had been using were worn out, so we replaced them with ones made by YOSHIMURA, as recommended by the Motorcycle store.
Aside from the Grip heater, I have not been so particular about the GripSingle item, but when I held the one I replaced this time, I was impressed by its exquisiteness in terms of the sense of catch, grip comfort, thickness, and so on.
Moreover, the Yoshimura logo is casually placed on the brim, which makes me grin!
View detail
Well matched to the styling of the Monkey 125
About quality and texture, I can confirm that the quality is great and that the material used is a durable rubber with a soft texture. About the feeling of use, I find the Yoshimura rubber grip set much more comfortable then the original grips and they still look well matched to the styling of the Monkey 125 with their grip design. Products to buy together, A new throttle tube, specifically a quick throttle tube from Kitaco would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the rubber grip set for my installation was average due to the difficultly removing the original grips in one piece as I wanted to retain them for re-installation in the future. Cost performance and comparison with other products, Pricing of this product is good. You receive a nicely designed rubber grip set that are comfortable but there are much cheaper grip sets available from other brands if the price is too high for you. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Grip is highly functional!
[How is it used?
We replaced them together when we replaced the high throttle.
Was the one you received as per Image?
The Yoshimura logo on the Grip Rubber is a good parenthesis.
Was the installation difficult?
We removed and inserted the NORMAL Grip while making full use of CRC and other tools. If nothing is used, considerable force is required.
How was your experience with it?
The use of thick-walled rubber allows for less numbness and peace of mind even over long distances.
[Included Parts:were they on?
No other particular accessories are included.
[Was there anything that disappointed you?
Nothing in particular, but it will crack over time.
Although the Grip is more expensive than other companies' products, the cheap Grips from KITACO and KIJIMA have some functionality problems, so this product gives us a sense of security.
View detail
Beautiful & High quality rubber grip for sports bike
This is a very high quality, beautiful rubber grip made by Yoshimura. I install it on my 1988 Suzuki GSX-R750J Slingshot stock handlebars, and it fits nicely and tightly without any movement. there is also a nice Yoshimura logo embossed on the side of the grip. The grooves and friction design on the grip is also very different from others and this is definitely a standout amongts all the other available aftermarket grips. Highly recommended! View detail
I bought 115 this time.
I like the feel of the grip very much!
I've been Repeat for a long time!
View detail
YOSHIMURAFlu
Replace with OEM Product? I was worried about whether to replace it with OEM Product or not, but I bought this one, which has a good reputation, and I replaced it. The appearance, shape, grip, and comfort of the grip are not bad. View detail
this one option
I have 3 Machines and they are all on this Grip.
The hardness and the Grip feel are good for me.
Please note that SEA BASS cars have a Large odd processing of Throttle.
View detail
YOSHIMURA Handlebar Grip Rubber
The original Grip Rubber was worn out and falling apart, so we replaced it.
I had a hard time deciding which one to buy, but I found YOSHIMURA at a supply store and they only had 115, but when I looked on Webike, I saw they had 120!
So, I bought it right away.
To install, simply remove the Bar End, pull out the original, and insert the new one.
However, it might be better to remove the original adhesive cleanly?
I just removed the left one and put the new one on without any bumps on the surface of the rubber, so I did the same with the right one, but it was loose; (I think I applied a small amount of glue because I thought it would stick out at the end if I applied glue to the entire surface.)
It's okay because I'm Wiring. (I wasn't going to do it at first…)
I bought a thin stainless steel wire with three grooves for wiring, wrapped it around twice, and twisted it to stop it.
Hmmm! This is Race ish!
Oh, and the Yoshimura logo is also included, so I put it right on top. (I don't think I would have noticed this if I hadn't seen the Webike imprint.)
Prepare and work properly with rubber glue or old glue remover, and cure the area around it.
View detail
Simple looking but well thought out
I have been using this Grip for the first time and have been Repeating it ever since, even if the car model changes.
It is not particularly flashy, but I like the way the grooves grip my finger in a good way, making it easy to operate.
View detail
It's ExactlySize on the Monkee 125!
Super throttle pipe:Installed at the same time as KITACO
It is SizeExactly to Monkey 125!
The grip is just right, not too hard and not too soft.
For those who do wiring, it's good because it has vertical stripes.
View detail
YOSHIMURA is good
The price is high Neck.
Not too hard, not too soft, but good.
OEM's Grip has Gloves.
It was a slippery feeling, but after replacing
I don't feel a millimeter of slippage anymore.
It seems to be used in the race.
Is it a high grip?
YOSHIMURAMark is also good for Parenthesis.
MONKEY125 is Just size at 120mm.
View detail
Parenthesis good!
The design is the best. View detail
Professional stuff
This Yoshimura product give me a good felt for handling my bikes , no doubt that I been recommended to my friends . Yoshimura is View detail
Replacement from OEMGrip
The reason why I didn't change the grip until now is because I didn't want to shave the place where it is inserted into the OEM grip on the throttle side. "YOSHIMURA" So I'm happy with it! But I probably wouldn't have installed it if it wasn't for the 120mm setting, and it's also the first time I've tried "Wiring" and I think it's a good idea! View detail
Just the right amount of hardness.
This is a Yoshimura with a strong racing image, but it is moderately soft and has no problems in touring use.
The horizontal grooved pattern is easy to operate with good finger contact.
The wiring groove is also in a good position and can be tightened evenly etc.
I used it with ZX-25R but I need a 5mm spacer on the Clutch Side.
The price is a bit high.
View detail
Hard, good control and good parenthesis
Some modification is required for installation (according to the motorcycle shop).
The Throttle side is 121mm, so I believe I got a Long attached to it.
It goes from a soft OEM feel to a slightly firmer feel.
It's stiffer and less prone to sagging than Honda's OEM Grip (the so-called RossiGrip).
It feels thinner than the OEM (sense).
The grip is rigid, so I feel that there is little escape of the input force.
This makes it a good choice for sports riding.
It is hard to grip from the outside because there is a rib at the grip end.
It's thin and hard, so of course it hurts your hands more than the OEM.
The impact is also Direct.
But there's an abundance of Race in the air.
From the moment I squeezed it, I felt like I was in a grip with Yoshimura and this Grip, so I felt great.
The hard, angular feel is so far removed from the OEM that it feels like a replacement from the moment you hold it.
It may not be suitable for Touring, but for now, Parenthesis is good so everything is forgivable.
But what hurts is what hurts, so I give it a 4 for use.
I like a hard grip, I like Yoshimura, and I want control.
It's a good grip for those who do.
View detail
Very good
Honestly, I bought it for YOSHIMURABrand alone
I thought it might be thicker than it looks, but when I actually operated it, the unevenness was good, and I was able to see it through the Gloves It's easy to feel and easy to operate I've always thought the so-called Honda OEM RossiGrip was the best, but this one is also available
View detail
Best product
I've got the power. Yoshimura grip rubber set has best quality. look use long life. good feeling. easy to installed. thank you. View detail
Be sticky
Rubber's sticky badly went to the car body at the time of putting out from the parking, but after grasping Grip, sticky peculiar to Rubber remains in hand.
I sent it to YOSHIMURA, but "no problem. Spec. It is returned as ".
I do not use it because it is sticky.
Yoshimura's salt correspondence was also disappointing.
View detail