Reviews
Good price and appearance.
[How is it used?
Mainly Touring
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
I guess it's a preference, but after about 30 minutes the unique unevenness starts to bite into my hands and become uncomfortable.
Good design, but not comfortable to hold.
How did it compare to other products?
After some use, I will change to Pro grip.
If you care about looks, it's Recommendation, but not much functionality.
View detail
Fits: YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900CU Raider, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner, YAMAHA XV1900 Stratos Liner
Not something I'd take the time to order.
Perhaps it is because they are foreign parts, but they are cheaply made. Also, the overall length is long, which may be due to the size standard of foreigner's hands, but the thickness is thin and the rubber is hard. The length of the grip is different from that of the NORMAL grip, which is why it is a smaller, stiffer rubber grip.:Pair (for Left and Right) The switch box positioning holes in the handlebar need to be re-drilled.
I found the Normal grip to be superior.
View detail
MADMAX Mad Max Supper Grip
Purchased and installed for Grip replacement. The situation is that thicker Gloves are slippery even if you have a good firm grip. It turns out that the surface is hard due to the material and the surface treatment makes it slippery. This is not so much of a problem in the summer, but from Grip's point of view, this is a serious problem. We hope that this problem will be solved as soon as possible. View detail
The grip is comfortable…
The Grip was uneven and uncomfortable to grip, so I stopped using it immediately.
However, when I held it with my bare hand, it felt like it was digging into my palm to fit in, so it may not be a good match for my Gloves.
View detail
slippery
The non-slip Rubber is diamond shaped, so the Center part of the Grip is fine, but the inside and outside are slippery with little friction 。 I seem to be gripping the lesser part of the Rubber with my Ring and Small fingers when Touring, and my Right hand has become tired since I changed to this Grip! 。 Short distances are not a problem.
Maybe it depends on how you grip the Grip, but I don't think it's suitable for people who grasp the Throttle with their Ring and Small fingers.
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
How durable is it?
I used it on my CYGNUSX. I didn't feel anything special at first, but after a little over 4 months of use.
I'm not sure if this is a problem or not, but I'm not sure if this is a problem or not. The problem of riding frequency
I think there may be some, but they are not durable. I'm thinking of replacing it soon.
View detail
It gets soggy quickly from heat.
The grip is good...but I am not happy with the quality.
1・It becomes a governor immediately by heat.
2・The black part becomes meku.
As for #1, I suppose I could glue it, but I don't want to...
As for the second, no.
So I am... Super Bike Grip #601, item number 98025. We are committed to
However Item number:98025. If you ride with winter gloves etc., you may not be able to reach the brakes with your fingers, so we don't recommend it.
View detail
Fits: KAWASAKI Z400 (KZ), SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Not much except for Design.
"It got twisted during installation.
The Grip itself is thin and the GripPattern feels good in the hand, but it doesn't absorb vibrations very well, and because it's thin, it seems to twist easily.
I don't recommend it for people who have to hold the Grip for a long time or do the grip removal by themselves.
"
View detail
Reverse TZ Grip
If you are looking for a TZ Grip, you want the same shape as the TZ Grip, i.e. a thin, KnurlPatterned Grip.
The detail is perfect.
It's the skinny TZ Grip itself.
But the..
The Material of Rubber is not good...
It's hard and you can't expect an ogre grip like the YamahaOEMTZ Grip.
Furthermore, the square pyramid on the Yamaha OEMTZ Grip is a convex mold, whereas this one has a concave mold.
Sure, it looks like the TZ Grip, but its effectiveness is not far behind the OEMs.
It's a shame.
However, if you want that kind of vibe, or a thin, so-so Grip with good grip (and great durability), it's better than the YamahaOEMTZ Grip.
I can't recommend it as a replacement for the TZ Grip at all, but I can recommend it as long as it's something like that.
View detail
Nothing beats an OEM product.
I liked the length, stiffness and thickness of the Kawasaki ZXType Grip, so I tried this one with the same design.
After long term use since 2017, it's clear. I will not hesitate to purchase OEM Products next time.
Length and thickness = OEM Product same etc. I like both.
Hardness = soft, but the OEMZXType seems to be even softer.
Durability = The surface has become rough around 2 years old. The surface rubber is in a state of powdering when rubbed.
Thus, the initial performance is not dissatisfied, but when I consider the durability, the OEM product is superior to Large.
So I have already replaced it with an OEM Product.
View detail
Hard to stick to the Handlebar.
Because of the material of the Grip, it was difficult to adhere to the handlebar even when grip bonded and wired. The Grip moved while the car was running, which I felt was dangerous. It is a pity because I liked the shape of the Grip. View detail
It's soft and doesn't get tired
I was worried that it was defeated by Impression and installed it, but by applying detergent
I was able to install it easily The vibration is not transmitted easily and I am satisfied with it
It's a little bit more expensive and has a large scoop diameter
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It's useless as is
It's just as others have implied
There is a snag when you change back to Axel Opening Zero
I'm too scared to use it on public roads as it is
I'll put Axel on for now to restore CHALY, which I don't know if I can run or not I bought it for the price first
I'm going to investigate the cause of the snag and see if I can fix it by processing
View detail
Fits: SUZUKI DF125, HONDA APE100, HONDA APE100 TypeD, HONDA APE50, HONDA APE50 DX, HONDA APE50 TypeD, HONDA BENLY CD125 T, HONDA BENLY CD90 , HONDA BENLY110, HONDA BENLY50S , HONDA BENLY50, HONDA BITE, HONDA BROAD, HONDA BROAD 90, HONDA CABINA, HONDA CABINA90, HONDA CB125 T, HONDA CBR125R, HONDA CBX125 F, HONDA CBX125 Custom
Influenza.
Good, high-quality grips, but not suitable for address v125, it's a pity, but I was hoping so because I don't like the stock ones. Good, high-quality grips, but not suitable for address v125, it's a pity, but I hoped so because I don't like stock ones. translated by Google Translator View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
More than I expected
Installed in SUPER CUB 90
I thought it would be tighter, but Left Side is a governor
View detail
Cherry grip
It's a handlebar grip that puts on the handlebar Dax. Convertible to use for Honda Chaly, basic pattern, normal, can fit But when I touch, I feel that the texture is quite hard, not soft. A hand strap that removes the dax hand. I used to put honda chaly. Basic pattern can be fit. I feel that the meat is quite soft, not soft hands.(translated by Google Translator) View detail
Not durable
Three months after installation, near the Grip end of Throttle was torn. To be sorry. Since it is not Pierced Type, I wonder if twist could not be absorbed.. View detail
Yup?
I purchased it as gap adjustment of Grip.
I think that it matches anything because it is Black, but I thought that it might be good to give design a little more.
View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
Yup
It will be about a year after using it, but the wear due to Gloves is intense and the stickiness due to the deterioration of Rubber has become much more concerned!
I am sorry it looks nice (>. <)y-~
View detail
Fits: KAWASAKI Z250FT, KAWASAKI Z250LTD, HONDA foresight, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, KAWASAKI KSR-2, HONDA ZOOMER(Ruckus), HONDA CF50, HONDA CB400SF, HONDA CB400SF, HONDA CB400SS, HONDA XR400 Motard, HONDA XR50 MOTARD, HONDA XR400R, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XLR250, HONDA XL230
Is it only cheap?
It is used for Grip change of original Chari Racer, but it is hard for me. As usual, I change the Grip by inserting Air from the gap and inserting it in feeling, but I do not grow with a feeling like a plaque. Therefore, installation and removal are troublesome.
I think that it is good to have various Grip sizes. As I will tell you the previous matter, because the material is hardened, but is the size setting of raw Rubber grip etc. It is Mendo smelly. I do not know the use feeling yet because it is before use, but the long distance is tough. However, since we use Racer, there may be no problem. However, although other companies' grips of the same design are being used by the off car, it is good that there is a price as well. , Crotch If I say whether to buy this, I will not buy it. However, Cost is good!
View detail