CF POSH Motorcycle Grips Reviews

Filter

Write a review and get Webike Points!

Reviews

CF POSH

12 Mar 2024

Mini Barrel Grip

Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].

Japanese Webike user

5/5

Not just looks, but functionality.

Made by Posh Cub Type/Mini Keg Grip is 。 I chose Black because Black is a safe color. 。
I chose it because it looks good on the CUB and because of the wide variety of colors available.

I want to change the Grip and make it my own. Various Design's are on the market.
However, the size of the handlebar is different for each car model, so if the size does not match, the Large size will change.
By the way, what is the size of the Handlebar Grip of the CUB?
* Dedicated to genuine handleGrip total length for HONDA CUBSeries vehicles:112mm 。 Grip I.D.:Quantity:Pair (for Left and Right) Co 24mm.

Grip replacement procedure
(1) Cut the old grip with Scissors First, you must remove the old grip to begin. 。 Various ways to remove Grip 。 There are various ways to remove it depending on the condition of the person and the motorcycle, such as cutting it vigorously with a cutter knife or injecting silicon spray and pulling it out as hard as you can. 。 This time, I didn't have a cutter on hand, and I was planning to dispose of the old grips, so I used a kitchen scissors to make the incision.
↓
(2) Remove the previous adhesive, etc. that adhered to the surface and clean it up.
↓
Next, we will install the new grips. 。 For this grips, it was easy to lubricate the new grips with silicon spray and push them into place. Generally, when installing new grips, it is often necessary to wet the handlebar with parts cleaner instead of lubricant before pushing the grips into the handlebar. 。 However, the dimensions of the grips are quite tight, so even if the silicon spray is used to fit the grips, the grips will not rotate after installation. 。
come
Effect after replacement
◎Grip's moderate elasticity is good.
◎ Grip is thick-walled and Barrel-shaped, making it easy to hold.
◎Less vibration on the hand than OEM. Less fatigue even over long distances.
◎The Fold is attached so it is not slippery.
◎The look of the car becomes old car feeling, and I like it (laugh)
Since the ▲Grip is Large, the Throttle opening degree is Large, so a little caution is required.

Personally, I like the comfort of the grip, and since the grip is a key element in motorcycle driving, I chose the barrel shape because it seemed like a good choice, mainly because it would reduce fatigue. 。 When we actually put it on, as expected, we found it easy to grip and the folds prevent it from slipping.

Barrel Type Grip is stylish in appearance. 。 For those CUB owners who are using worn-out Grips, we suggest replacing them, as they are quite inexpensive. View detail

CF POSH

21 Dec 2023

Mini Barrel Grip

Fits: HONDA LITTLE CUB, HONDA SuperCUB

Japanese Webike user

4/5

I kind of bought it because of its face white shape.

[How is it used?
I had been restoring the LITTLE CUB that was given to me by hanghang for half a year, and when the restoration was over, I wanted to start working on custom and dress-up pedals. I wanted to match the color of the Grip with the color of the Footpeg Rubber and the Rubber of the Kick pedal. If it's a LITTLE CUB, it's a Barrel Style Grip! I bought it with a middle-aged stereotype.
How was your experience with it?
at the same time Wrap-around Grip heater." I plan to install the Mini Keg Grip at a time when I will no longer be using the Grip heater (around March) because I have purchased a new Grip heater.
When I took this product out of the box and wrapped it around the above Grip heater...I gave up on installing it this winter because it is hard to grip when I wrapped the Heater around the Mini Keg GripSingle Body because it is thicker than the Grip.
My impression after holding it with Single Body is It's thicker, but just the right thickness to make it easy to grip." I felt that."
How did it compare to other products?
The shape of the Grip is "Barrel-shaped." Therefore, it is difficult to compare it with the Grip of the normal design, but the grip of the GripCenter is thick, so if you can't handle it, it is a very bad Grip.
If this Grip was installed on a SUPER SPORTS750 series or a big bike, I would be inclined to silently replace it, but I wonder if it would be good for a LITTLE CUB. I think it's a good idea for a LITTLE CUB.
[Points to note]
The unique shape and colorful color variations.
Other items that would be helpful
The deciding factor in the purchase
The reason for this was the lineup of brown colors that matched the footpeg and kick pedal, and the reasonable price.
I was not sure about the Brown Grip because HondaOEM Product also had a Brown Grip, but I was intrigued by the barrel-shaped design. If I can't eat the discomfort after using it, I may replace it with OEM Grip Brown.
【Included Parts:presence or absence】.
Quantity:Pair (for Left and Right) Grip of 1Quantity:Only Set is included.
[ITEMS TO BUY TOGETHER
I don't think there is anything special to buy since GripSingle Body is the only thing that works, but I'm aiming for 3,000 yen to get free shipping, so I'll buy Mirror and Footpeg Rubber (when you buy a used CUB, the footpeg rubber on either side of Large may have holes from falls or other causes. I'd like to buy Mirror or Footpeg Rubber (when you buy a used CUB, you may find that one of the large Footpeg Rubber has been penetrated by a fall or something). Small Things That Concern Me. It is also a good idea to select consumables (brake shoes, engine oil, etc.) that you will eventually need.
Opinions and requests to Manufacturer.
The grips of old CUBs are unique, so there are not many products that are compatible with them. View detail

CF POSH

06 Aug 2022

Tread Grip

Fits: その他

NO NAME

5/5

Cool Tread Pattern Grips for the Grom

About quality and texture: I am happy with the quality of these tread hand grips, they are made from a soft rubber and the design pattern is very cool. About the feeling of use: They are a comfortable hand grip due to the soft rubber and smooth surfaces, much nicer then the Honda hand grips. Products to buy together: A quick throttle tube would also be desirable to purchase along side these hand grips so you don't need to go through the trouble of trying to re-use the Honda one and you'll also end up with a better throttle response. Difficulty of installation: The process to install takes about three quaters of an hour, heating the old hand grips to assist with removal helped and I used a silastic to secure the hand grips in place. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a comfortable hand grip with a unique tread pattern at quite a cheap price as compared to the hand grips available from brands like Avon. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: With so many hand grips available, confirm you measurements of the mounting diameter and required length before you start browsing the huge range at Webike. View detail