Reviews
PoshRacing grip
Replaced the OEM Product that is on it now!
Very nice and easy to grip.
It looks different, so it's worth replacing!
It comes in a variety of colors, so you can match it with your Motorcycle!
View detail
YOSHIMURAFlu
Replace with OEM Product? I was worried about whether to replace it with OEM Product or not, but I bought this one, which has a good reputation, and I replaced it. The appearance, shape, grip, and comfort of the grip are not bad. View detail
HondaOEM
I was able to purchase the NORMAL Honda OEM Product for the replacement of the installation grips, but I decided to purchase the RossiGrip, also known as the RossiGrip, which has a good reputation.
I think it looks better than the shape, Grip and NORMAL.
I also bought Left together, but this one is a bit more expensive, which is no wonder since it is a HondaOEM Product.
View detail
Processing Required
After replacing the handlebar with Other Brand Product, we put on the grip, but the grip was 7mm too long and the hand guard could not be attached, so we cut the end and adjusted it.
I don't think it would have been necessary to cut it if it were an OEM Handlebar.
Light-colored areas will show Black stains after use.
View detail
Design that looks easy to grip
I chose a design that would be easy to grip and resistant to deterioration, avoiding a textured format that looks like a mere small pile of files. The inner edge of the Right Side Throttle required some modification, but I was prepared for that, so I was able to do it without difficulty. I had been using a deteriorated grip for a long time, so now that I have a new grip, it feels like it is absorbing my hand and not slipping, and I feel good just holding it. I wish I had replaced it earlier. I will observe the durability of the new Grip. View detail
In case of Closed end, CRF250L is too short.
When installing on a CRF250LOEM or a closed end throttle tube, the grips are short and there is a gap between them and the switch box.
Also, because it is short, the flange touches the lever when you grip the clutch. In my case, I cut off the point of contact.
I've used it, and my impression is that it's a handful. (around the first joint of the finger) I think that the vibration felt in the "Mere Old Man" is a little less than that of the OEM, but I honestly wonder if it is effective for long hours of touring. ? It is
View detail
Fits: KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, HONDA ZOOMER(Ruckus), HONDA XL230, HONDA TLR200, HONDA TLM220R, HONDA SL230, HONDA REBEL, HONDA PS250, HONDA GB250 CLUBMAN, HONDA FTR250, HONDA FTR223, HONDA DAX, HONDA CRM250R, HONDA CRM250AR
MAD Max Handlebar Grip Wave Type
Grip feel is solid. No problems with installation. View detail
Handlebar replacement at the same time
We replaced them together when we replaced the handlebar.
It's comfortable to hold.
Domino is my personal favorite Brand and I will continue to use it!
View detail
even if only a little
I chose MACH because it has a lot of vibration and I wanted to improve it as much as possible.
Do you feel better now?
No, it's good enough if you consider Grip alone.
View detail
Grip wear prevention.
I purchased the Grip heater because it is more worn than I expected.
The Grip heater used is PLOT's EFFEXGrip heater.
There is also a product for EFFEX in Lineup, but I preferred the look of this one, so I used this product this time.
I was worried about whether it would stick properly because it is quite uneven, but it worked perfectly!
After covering it, the whole thing was then burned with a heat gun.
It may be a little easy to Slip because of its spongy feel.
It is simply a Large Heat Shrink Tube.
I didn't know such a product existed, and if I had known, I would have installed it before it wore out.
View detail
Although it is a reasonably priced grip, in the makeover of a motorcycle, it is an operative outclassing!
Although it is a reasonably priced grip, in the makeover of a motorcycle, it is an operative outclassing! View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, HONDA CB250RS, HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F
It chose by appearance. A portion black when grasping is collapse.
It chose by appearance.
A portion black when grasping is collapse.
View detail
It was common.
It was common. View detail
Fits: HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS(BWS), HONDA MONKEY, HONDA LEAD 50, HONDA LIVE DIOZX, HONDA FUSION, HONDA MAGNA 50, HONDA HORNET250, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA(MF08)
Comparison with Zero Grip
The grips I replaced before were getting worn out, so I replaced them. The design is almost the same. The design is almost the same, but the price is one third of the Gold price.
I tried cheating.
I really wanted Pierced Type because I wanted to put a Bar End on it, but I made an order mistake and bought Closed End, so I cut the end with a Cutter Knife. Check the Spec. before ordering.
Here's a little comparison with the 0ro Grip.
The Mad Max Grip is noticeably stiffer; it doesn't feel rubbery and has a plasticky grip. Since it is stiffer, it seems to be more durable in terms of wear and tear.
I feel that it is hard and cannot be expected to absorb vibrations or anything like that.
Even considering those negatives, the price is attractive.
But honestly speaking, if price can be ignored, I would definitely give the edge to the 0ro Grip. If you consider price as a factor of performance, it is quite superior.
It is not recommended for long-distance touring or large motorbikes with vibration, but for short-distance use or for those who want to customize at low cost.
View detail
Used for Motorcycle
The diameter of the handlebar for Motorcycle is the same as for Motorcycle.
Only the for Left Side was installed on the bike.
The domino Grip is brilliant on My bicycle.
View detail
Vibration reduction?
I bought the same one as the previous owner was wearing because it was getting sticky with age and I wanted something with vibration reduction for the Grip under the Grip heater. I think it's a good product, but it doesn't reduce vibration for the price. Has the vibration been reduced? I am not sure if it is a good idea or not. There are other vibration-reducing grips that are oval-shaped and thick, so I think it would be better to buy those if your goal is to reduce vibration. I think it is better to buy that one if you are looking for vibration reduction. (This is a friend's story. My friend rides a CT110 HUNTER CUB) I don't mind because I wrap the Grip heater around the top, but I think the design is a little uncool. View detail
The design is very interesting. It is a very ordinary Grip.
This is a replacement from PROTAPER.
The surface pattern is totally different, but I think PROTAPER is rather an uncomfortable category.
This one is flat on the palm and has a grid pattern on the fingers.
I think this shape is standard for off-road.
Grip end is marked with an arrow mark to indicate which direction it should be aligned.
It's a little thing, but the Design is elaborate and face White.
View detail
Do you think it's good?
I adopted DAYTONA's Grip for the first time. Personally, I don't like the Gel, but it seems to have moderate cushioning and less fatigue. I don't like anything too flashy, so I decided to use Color:I chose Gray. I like the design with a calm feeling. View detail
Fits: YAMAHA Virago 250 (XV250), その他 (22.2 mm handle), YAMAHA Dragster 250, YAMAHA Virago 250 (XV250), YAMAHA TW225E, YAMAHA TW200E, YAMAHA SR500, YAMAHA TW200, YAMAHA SR400, SUZUKI Glass Tracker Big Boy, SUZUKI glass tracker, KAWASAKI 250TR, KAWASAKI Estrella RS, KAWASAKI Estrella., KAWASAKI W650, KAWASAKI W400, HONDA GB250 Clubman, HONDA FTR223, HONDA Magna 50, その他 (22.2 mm handle)
It's normal. This is fine.
It's a very ordinary Grip.
Normal is best. Easy to grip, moderately soft, and moderately thick. This is the Grip.
good point
Fee Ring is close to OEM.
It's thick enough that your hands won't get tired from the vibrations.
Installation is easy with Parts cleaner and glue.
The shape is not too assertive, so it blends well with any custom.
It is very cost effective.
Grip should match your own senses.
View detail
Spacer for Grip heater
Purchased as a spacer for Grip heater installation View detail