Reviews
Screw loosens rather quickly.
I wanted a folding Mirror for forest road touring and bought it because it was featured on DirtFreak's YouTube.
The screw that operates to fold up the Mirror started to loosen after driving 1000 km after installation, and while driving on a forest road, the screw came off and the Mirror slipped off. Fortunately, I was able to pick up the Mirror, and after returning home, I bought a Gold washer, a hexagonal Screw&Nut, and a spring washer at Home center and tightened them.
The attached washer and Hexagon Nut alone will loosen, so it would be safer to put a spring washer between them.
Mirror itself is easy to read for the price and the texture is up to the task.
View detail
You shouldn't change it with Fashion.
I found that many other people's reviews said that it was blurred, but I put it on thinking that it is an Other Brand Product, so it can't be helped if it's a little blurred,
It's so blurry!"
There are two reasons for the shake. One is that the joints are designed to stop clicks, but the play between each click is too large to stop the click properly.
Closing the screws until they stop will interfere with folding, and even if the screws are tightened just enough, they will loosen because there is no kind of lock.
Second, the joints are plastic, so they are weak to begin with. Shaking occurs.
As a countermeasure, I changed the Nut to a Self Locking Nut, and since the Bolt length was also insufficient, I changed it to an M6×25 Cap bolt.
It sticks out a bit. (See photo)
I thought this would make it a little better if I fine-tuned it.
Unless you are loading a transporter or running a closed course on your own, you probably don't need to change it.
Parts used by those who really need them.
View detail
The construction is not good.
It is not well made and has a playful clatter.
The good thing is that it folds! That's all.
View detail
Preliminary.
Is it too much to ask for OEM-like ease of seeing in Foldable, which needs to be adapted to the usage situation for rearward checking and blurring? View detail
Off-road mirror
The NORMAL was broken during a course run, and since then it had been installed from DT230LANZA, so it was a challenge to change to another manufacturer and also to the same manufacturer.
It is good when parking the bike or driving in the forest, but it is shaky when driving.
View detail
Might not make much sense to replace from OEM.
It is good that the angle can be changed, but it does not work when it is tightened, a tool is inevitably needed.
Mirror is shaky when loose enough to move by hand.
View detail
Fits: KAWASAKI KLX250R (Competition), SUZUKI TS50 Hustler, YAMAHA TY250Z Scottish, YAMAHA TY250Z Scottish, KAWASAKI KDX125/SR, KAWASAKI KDX200R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KLX250SR, KAWASAKI KLX300R, KAWASAKI KX100, KAWASAKI KX100, KAWASAKI KX125, KAWASAKI KX80/II, KAWASAKI KX80/II, KAWASAKI KX85, KAWASAKI KX85, SUZUKI DR250S, SUZUKI RM125, SUZUKI RM125
diminish
I have been using it for a long time and the bearings are worn and rattling. View detail
Easy to fold
[How is it used?
It is used as Mirror on WR250R which is used for multi-purpose both On and Off.
Was the one you received as per Image?
The product is as per Image as my mountain playmates use it.
Was the installation difficult?
It is a very simple job to remove the Mirror that had been previously installed and install it in the reverse order.
How was your experience with it?
I sometimes fold up Mirror when driving on forest roads, and this product is easy to fold up and ready to go because the base part is operational.
[Included Parts:were they on?
MirrorBody1Quantity:Set only Package with no Included Parts:, Quantity:Pair (for Left and Right) Sold separately. Normal Thread ScrewSpec." Opposite Thread ScrewSpec. is now in the lineup.
[Was there anything that disappointed you?
Structurally, the mirror vibrates from the base, and in certain areas, the mirror surface becomes blurred, making it difficult to check the rearward direction (retightening the moving parts did not improve this problem).
。
0Other items that may be useful include
Point and hang of installation
Adjust & fix the angle to suit your riding position.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but since the product is Mirror for Motorcycle, there should be no problem.
[Notes]
If the Screw at the root moving part is loose, it will move due to running wind pressure or vibration, so please retighten it to suit your running conditions.
[ITEMS TO BUY TOGETHER
・Quantity:Pair (for Left and Right) Is it about buying at a
[Opinions and requests to Manufacturer
I think a little more vibration control would make this an even better product...
View detail
So so
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Moderately
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Required I want a loosening Nut for Off use with lots of vibration!
The main point of this product is that the mirror can be folded, which is an obstacle when driving off-road, and I do not ask for much else. If the manufacturer would do so, the evaluation would be much higher. View detail
I want a loosening Nut for Off use with lots of vibration!
The main point of this product is that the mirror can be folded, which is an obstacle when driving off-road, and I do not ask for much else. If the manufacturer would do so, the evaluation would be much higher.
The availability of the Opposite Thread Screw for Yamaha is Large.
View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI Jebel 250, SUZUKI DR250S, SUZUKI DR250R, SUZUKI RMX250S, SUZUKI TS200R, KAWASAKI D tracker, SUZUKI DF200, SUZUKI DR125S, SUZUKI DR200, SUZUKI TS125 Hustler, KAWASAKI D Tracker, SUZUKI TS125 HUSTLER, SUZUKI DR200, SUZUKI DR125S, SUZUKI DJEBEL250
Used by D Tracker
[How is it used?
Mounted on D Tracker.
Applications:Motard race, FlatDirt
Used for about 2 years. Many times overturned.
Was the one you received as per Image?
As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult?
The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it?
TRAIL (MOTARD) The size and lever position adjustment mechanism were good, but I felt that it slipped and the operation feeling was not so good.
After installing this, I regretted that I should have used ZETA's Pivot lever. I regretted it.
Also, I have small hands. (Glove sizeM) The OEM lever is often difficult to use, but this product allows you to adjust the lever position to a position where you can operate it properly. The ability to operate the lever firmly leads to safe riding, so we recommend that those who have trouble operating the lever because their hands are too small should introduce products with adjustable lever positions, including this product.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc.
After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum.
If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis.
Dry rubs may be a better choice for MOTARDs with Dirt driving.
View detail
A little heavy.
I wanted to buy Takatsu's Trial mirror, but it was discontinued, so I bought this one. I also used it for my previous motorcycle, but after a long time I took it in my hand and thought, "Was it this heavy? Since there is no mounting base in the Racer, it is a material of M10.:I bought AluminumClamp from Rakuten and installed it.
As far as the product is concerned, it works well enough.
View detail
It's neither good nor bad
The product is neither acceptable nor unacceptable because the texture is not in the price range.
It's cheap, so I think it's easy, and if it gets damaged, I can replace it right away.
View detail
Simple Design
Installed as Kill switch.
It works properly.
It's hard to tell from the picture, but the Bullet Terminal that comes with the product is smaller than the standard one.
I cut it off and replaced it.
View detail
Standard product. Functionality is fine.
This is a foldable Mirror for Off-road. It's been sold for a long time, so I guess it's already a standard product.
Originally, this product was probably designed to keep it from breaking or cracking in the event of an off-road fall, but since the angle can be adjusted, it's also used to prevent commuter riders from slipping through. That's why I bought it.
Regardless of the angle to the Mirror hole, the angle can be adjusted 180° or more, making it a Communal to Left/Right product. However, you should look at the screw hole of the car Both Sides first, and check whether you should change the forward or reverse screw before you buy it.
You'll have to buy both bottles again like I did.
Just well, Material:Because it is Plastic and round Mirror. It's cool There are very few elements.
View detail
Think of it as a Mirror for off-road driving.
I bought this mirror not for off-road motorcycle, but for off-road riding. There is an adjustment function of the angle, but it is not something that can be folded quickly when passing through, and the folding angle cannot be changed without a tool. (It can be managed by loosening it a little, but the performance as a mirror falls.
I just wanted to get a good angle (upright in my case) and I'm happy with the narrower overall width of the car.
View detail
Fits: HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR85R/RII, HONDA CR85R/RII, HONDA CRF150R, HONDA CRF450R, HONDA CRM250AR, HONDA CRM250R, HONDA CRM50, HONDA CRM80, HONDA XR250, HONDA XR250 Baja, HONDA XR250 Motard, HONDA XR400 Motard, HONDA CR125, HONDA CR125, HONDA CR250, HONDA CR250, HONDA XR250, HONDA XR250
It doesn't come with a stop-lamp.
It is easy to install, but it is not suitable for ・・・・ XR250 (sweat). The construction is short and I think it is great, but the stop-lamp of the rear fender doesn't turn red even if you brake front because there is no protruding lever that hits the brake switch.
I added another DRCBrake leverShort because I couldn't help it. It's not a problem if you don't have to use the RearStop-lamp.
View detail
I'm concerned about the distortion.
I've had to replace this product many times for Mirror distortions, including at other stores, but they are all distorted. I can't focus and it makes me uncomfortable. for Left there is almost no distortion. for Right is the only thing that is distorted. Webig's response has been excellent. They sent me a replacement right away. However, the Manufacturer's response was terrible. I contacted the manufacturer and he said For Both Left and Right, so I sent for Left. And. The product is actually QUANTITY:Pair (for Left and Right) The Screw holes are in a different position in the screw holes and the part number of the product is different. I pointed that out to them. Can't we just put up a sticker or something to fool them? The answer is. What do you think about the quality of the product? I asked. It's up to the factory to make sure the quality is right. That's what it says. If we accept this quality as good, won't the quality of the manufacturer be questioned? And I told him. We're on the Level. The Mirror is a rear visibility safety component and the Manufacturer's response was surprising. I would like to reiterate that We-Big is a great shop that is very accommodating. View detail