Reviews
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR800, HONDA VTR250, HONDA RVF400, HONDA VFR750R, HONDA NC700X, HONDA NC750, HONDA GB350S, HONDA NC700S, HONDA CBR1000RR-R SP, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB650F, HONDA CB650R
It is not a pure Black.
The color looks a little brownish rather than black in the right light. It is super easy to install. I think you can install it by yourself, but if you don't have the knowledge to remove the OEM bar end, you might want to ask a shop to do it for you. The included Inner Weight is a few Grams lighter than the OEM. View detail
A bit pricey.
With bar ends made entirely of gold, the basic rule is to replace the bar end when it falls over, but in this case, only the resin part can be replaced, so there is no need to buy a new one if it is just a standing bump.
However, the replacement of the resin part is a bit Large strange.
View detail
Expensive, but good
Although the price is high, the shape and dimensions of the mounting points are appropriate, and it fits much better than the ones I had before.
The design is good and satisfactory!
View detail
Fits neatly
Gold, the symbol of Manufacturer, is very Beauty! View detail
sc40 Bar End Replacement
I had been thinking of a thin Bar End because a large Bar End would make it difficult to get in and out of the Apartment's bicycle parking lot, but I was unsure because I couldn't kill the vibration.
Stainless Steel Bar End Short in BABYFACE
It is not so large, and being Stainless Steel, it is heavy and strong, and vibration was reduced.
It feels easier when the slight vibration coming to the hand is reduced.
View detail
The color is different from the picture.
I liked the design, but was a little disappointed that the gold was a strong orange gold! View detail
![[RaceConcept]RaceConceptHandlebar Kit Up typeSIDEOffset](https://img.webike-cdn.net/catalogue/images/77031/web_Handle-Up_Type_Side_Offset023_TS.jpg)
Product with good texture
Babyface
RaceConcept. RaceConceptHandlebar Kit Up typeSIDEOffset
UP45-10
Handlebar240mm
Item Number ： R05-HS47100M
car Species:YZF-R25 (8BK)
The texture is very good and beautifully finished. Unfortunately, the brembo radipon could not be installed this time because it interferes with the Cowl.
View detail
Babyface Lever Guard
About quality and texture Strong steel will black smooth surface. About the feeling of use Looks great. Not too huge looking as the other brands. Looks sleek. No cheap material look. Products to buy together Babyface long bar end. Difficulty of installation Easy to install. Maybe I take a while to adjust the level which you feel comfortable and protecting the level from breaking. Cost performance and comparison with other products Cost is reasonable as all the babyface products. Good quality. Unlike expensive Italy brands is almost twice the price but same quantity. About shipping and packaging Small package will do. Can order with other small items. Well pack with plastic package. Any concerns, cautions, or advice when purchasing Drop once my motorcycle before and its able to to protect my level from breaking but these a possibility to use back the level protector again is you are able to bend it back and re-coat the paint paint again. But then again you can alway purchase a new one as the price is reasonable. My level did got scratched during the drop but it sires protects it from breaking. View detail
Highly satisfactory.
Yamaha's M16 had been out of stock for a long time, but I found a Koken M16→M6 conversion adapter on Yahoo Auctions, so I bought this M6 one that was available.
Since it is a Large Thin Motorcycle with a vibration, I was momentarily torn between Stainless Steel and Black, but I am glad I went with Black.
The other motorcycle is also a Babyface short bar end, and I love the design, texture, etc. of this one.
View detail
Satisfied
I was worried about Black, but I bought Gold.
I like the high quality construction with Knurl finish.
It is a little more expensive than other companies' Bar Ends, but I am satisfied that it was well worth it.
View detail
visual improvement over the oem bar ends.
These are straight forward to fit, although I noticed a little gap(a couple mm at most) between the bar-end & the oem grips. These feel a little lighter in the hand than the oem bar-ends (sorry I didn't weigh them to compare) but it dosent seem to cause any noticeable issues whatsoever. Overall, a great looking product, I'm happy with them. View detail
Add Gold
Add Gold Components
I expected a reduction in vibration since the vibration is Large, but it remains the same.
Looks Parenthesis better!
View detail
Babyface Lever Guard
About quality and texture Hard aluminum feel. Looks sturdy and able to restand drop I guess. About the feeling of use Length is adjustable. Able to fit together with my gale speed brake pump and clutch original length Products to buy together Bought together with babyface end bars that fits directly to the original handlebar. Difficulty of installation Easy to installation with less then ten minutes. Cost performance and comparison with other products Price and outlook will not be losing out to other competitors brand. About shipping and packaging Well plastic packaging. No issue when received item Any concerns, cautions, or advice when purchasing Need to find matching end bars for your bike. If it fits no issue installing the guard. There's a bit of gap on the Original handle bar. But I think it's not an issue. View detail
New ModelXSR900 Bar end mirror removal measures
Items for the problem of what to do with the Bar End after removing the OEM bar end mirror of the New Model XSR900.
It is specially designed for this purpose, so it can be installed without any worries. (The gap between the Grip and the Bar End will be filled.)
It is expensive, but the quality is very high because of the high price, so I give it 5 stars.
View detail
It's all about Stylish!
You can buy similar colored Bar End products from other companies at parts shops, but they look somewhat cheap. For example, what if you try to match them with baby face's Lever Guard? The other company's product would definitely look out of place.
I don't like too large size, so this is the only one I can choose.
View detail
For those who want to remove OEMBar end mirror
No wobble at all as it is a complete Screw fit! View detail
We chose Black to match the car body.
Babyface is the quintessential babyface.
The texture is too good.
Crimp is also working well.
View detail
Size, Visual… Batch!
No problems with the sizeetc. of the Screw. Installation was easy. View detail
Fits: YAMAHA YZF-R25, KAWASAKI Ninja650, Others , HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA NC700S, HONDA CBR250R, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100EX, HONDA CB750, HONDA CB1000R, HONDA CB1100, HONDA CB400SB, HONDA CB125R, HONDA CB250R, HONDA CB400SF, HONDA VTR1000 SP1, HONDA VTR1000 SP2
I wanted the look of the Bar End and to install a BabyFace Lever Guard!
Let's start with the appearance.
I think the workmanship is beautiful, as it is BabyFace's product.
The problem is installation.
The CBR600RR installed this time had the OEM weight removed from the handlebar, and the Inner Weight Spec. was installed. This work is necessary for HONDA cars with OEM Weight. It was troublesome to do this work. However, if you are a person who does your own maintenance, it is possible to install the OEMWeight by yourself.
Once the OEM weight is removed, the rest is the same as installing an ordinary external weight.
I was concerned about how the vibration transmitted to my hand would be due to the change from OEM weight to BabyFace's weight, but I was relieved to find that it was the same as with the OEM weight when I ran the car.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Installed to make it look Race ish!
Installed on CBR600RR this time.
I installed the Lever Guard because I thought it would make the car look more race-ready!
Originally, it was designed to prevent the brake lever from falling over during a race when it made contact with another car.
We do not know if it will protect Lever in the event of a fall.
If I wanted to install this, I would need to replace the Handlebar End with one made by BabyFace.
The Bar End and Lever Guard by BabyFace were installed to make it a much more race ish!
I am satisfied with both the appearance and quality.
I don't know if it will be Demerit, but the Gold amount seems a little high.
View detail