Reviews
I removed the OEM Product to check the inside diameter.
The handlebar inner diameter of X FORCE is 17.5mm.
For products with a corresponding inner diameter of 13mm or larger, the Bolt must be tightened considerably to secure it in place. Some products with a corresponding inner diameter of 18mm or larger can be installed, but require some effort.
A little force is required to remove the Grip end of OEM Product.
It can be removed either by wearing non-slip gloves and relying on grip strength to turn it, or by grabbing it with pliersetc. to turn it.
The direction of rotation can be in either direction, as the Screw is not cut off.:Pair (for Left and Right) The connector can be removed by pulling it while turning it to "1".
View detail
Fits: HONDA CUB90
For the price, it's good enough.
One Side's Mirror was broken and I was looking for something close to it.:Pair (for Left and Right) I bought it when I found it. I didn't expect much for the price, but it was better than I expected.
The plating treatment on the screw threads makes it difficult to bite the first screw, but once the screw starts to rotate, there is no problem to fix it with Smooth. The mirror surface has no noticeable distortion and I am satisfied with it.
View detail
Elimination of long-standing problems
Product Name
MirrorOffsetHolder for 10mm
Item Number
27292419
Vehicles
Grom (JC61)
Number of man-hours
Around 20 minutes
Required Tools
Torque wrench, Hexagonal socket, Combination wrench, Pliers system
Why did you choose this product?
There were other products that extend the length horizontally, but this was the only one that also extends the height. Also, it was available in black and looked luxurious. Also, I had a feeling of trust in the product because Grom's name was mentioned in the Impression section.
Was the one you received as per Image?
It was just as shown in the Image. It looks good with a sense of luxury.
Was the installation difficult?
It was easy:just remove the screw, select the size screw that fits the screw hole, and install it.
How was your experience with it?
The long-standing problem of not being able to see Mirror has been resolved. I was worried about not being able to see what was going on behind me, and I felt it was a hassle to bend my elbows every time I had to do it. It was also very easy to install the pons without changing the position of the wiring such as throttle wire.
[Included Parts:were they on?
There were some things written on the documents etc., such as screws.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Installed on a JC75 Grom. Long-standing problem of not being able to see the back well has been resolved.
Many of you may have had a near-miss with the poor rearward visibility that seems to apply to most moped models.
Since the handlebar width is narrow due to the small size of the vehicle, the OEMMirror is too far inward to see the back of the vehicle due to the obstruction of one's arms and shoulders.
Depending on the shape of the Mirror, it can be much better, but still, your body will be slightly reflected in the Mirror.
This product can be attached to the base of Mirror to offset Mirror to the outside for rearward visibility.
Material:It's Aluminum and lightweight, so it doesn't affect handling.
Bolts of M8 and M10 are included and can be installed on most motorcycles. Some models may require an Opposite Thread Screw Adapter.
My impression of the installation is that my arms used to appear in Mirror, but now only the back of the camera is completely visible.
It is ridiculous that I have had to put up with this for three years now.
Of course, the Mirror is Offset to the outside, which will affect the slip-through. You are on your own in this area.
It is considered a good product with excellent cost performance.
View detail
Very ordinary Mirror, but great cost performance!
I purchased this product because the Gold Frame Mirror that came with my current Motorcycle when I purchased it has rusted away.
The texture is THE NORMAL" It is so extremely normal.
It is not outstanding, but it is not bad either.
There are no complicated adjustment functions, so you can adjust the field of view with one hand while waiting at a traffic light.
The field of view is better than that of other brand products with more unusual designs, but it is not as good as products that claim to have a high field of view.
This is also quite normal.
The target buyers are those who do not want to spend a lot of money, those who are satisfied with NORMAL products, and those who dislike complicated adjustment functions.
As a general comment, I think it is an ordinary product with no flaws at all.
View detail
Fits: HONDA CUB90
I bought this for my SUPER CUB.
Maybe I'm not putting it on the right way.
Unable to install
I put it in the shed as it was…
View detail
Fits: HONDA CUB90
If you're not particular about it, it's a push.
Normal look, and cheap anyway!
It may not suit fashionable CUB riders, but it has good rearward visibility and no complaints for me.
View detail
Fits: HONDA Universal, SUZUKI Universal
EnergyPrice EnergyPrice for HONDA & SUZUKI Oval Mirra
Cosmetically outstanding.
The range of motion is small and may be slightly difficult to use.
It is a range that can be forgiven if the price is taken into consideration because the function is fulfilled enough.
Quantity:Pair (for Left and Right) I'm surprised at the price.
View detail
Fits: HONDA CUB90
Cheap mirrors with acceptable quality
I bought these mirrors to replace old cracked ones. For such a low price, the quality is quite acceptable. There is even a little more chrome than on native mirrors, since on relatives the clamping nut is ordinary and closed with a black rubber cap. On these mirrors, the clamping nut is specially shaped and chrome plated, so it looks much prettier. I did not notice much difference in the review. I bought these mirrors to replace the old cracked ones. For such a small price, the quality is quite acceptable. The chromium is even slightly more than on native mirrors, as the usual pressure nut on native mirrors and is closed with a black rubber cap. These mirrors have a special shape and chrome nut, so it looks much prettier. I have not noticed any particular difference from the overview. translated by Google Translator View detail
Cheap
This price is this price! It is exceeding the degree of satisfaction. (Lol) And for Yamaha and Quantity : Pair (for Left and Right) It is saved by this price because it makes it easy to do it in Motorcycle which I use for play. Recommendation! View detail
Fits: HONDA CUB90
Even if it is cheap I'm solid
Because OEMMirrorGold genus part rusted up I bought it for cheap and hands fairly this time ~.
Points I felt using appearance etc.. Is purely same. Large I can change it a lot better, because the refractive index of the Mirror part is different, at the beginning I feel very uncomfortable at the beginning, but it gradually became familiar. As for the Gold genus part, Plating is also tolerable, so we carefully wearing CRC soaked in Toraoru.
View detail
Fits: HONDA Universal, SUZUKI Universal
Cost performance is high!
I did not have Back Mirror of G DASH so purchase.
If you were looking at Shopping, it was too cheap so Large was durable, but I thought, but when I saw the product I came, it was a good product above the price.
View detail
Fits: HONDA CUB90
Big Li is a cheap price!
At first, really Quantity : Pair (for Left and Right) Although it was a dubious semi-call, when it arrives, it really is Quantity : Pair (for Left and Right) It is surprising that Set at this price! The quality of goods is not good in small parts, but there is no problem at all for use! View detail
Fits: HONDA Universal, SUZUKI Universal
It's better than OEM!
I used it for SEPIA ZZ. I was anxious because it was cheap but I am solidly making it. It is slightly shorter than OEM, but there is no particular problem. At this price Quantity : Pair (for Left and Right) I do not think anything else! I will absolutely buy it again! View detail
Fits: HONDA CUB90
Quantity : 1 Set of 2pcs. This price
Quantity : 1 Set of 2pcs. This price.
It was not a cheap worse, it was a proper item.
I used it for work CUB, but it is already reserved Quantity : Even if 1 Set has it, there seems to be no loss.
Oh, 110 CUB is 10 mm instead of 8 mm so be careful.
I purchased a new Adapter. w
View detail
Instead of OEM!
Where I was thinking that I should paint because Mirror of used and rusted was rusty, I found this item.
I did not expect it because the price is expensive, but I made it steady and elliptical shape to Stylish than NORMAL! The movable range of angle adjustment is also Large so it is Large changeable satisfaction!
If you buy this paint you will have a lot of advantages at the same time buying this product.
View detail
Fits: HONDA CUB90
MIRAXBlack circle Plating stay Mirror
Since Mirror of CUB got rusted, I was satisfied with Large going to this Mirror if I was coloring Mirror.
I was surprised at the price. Really Quantity : 1 Set of 2pcs. I was wondering, but I was wondering if Quantity : 1 Set of 2pcs. was. I am planning to buy it for Spare again. I think that it is perfect for Restore & Repair.
View detail
NORMAL style Mirror
As the title is, it is a NORMAL-style Mirror
I wanted an inexpensive Mirror so STD Shape is enough
Yamaha's inverse Screw type is inexpensive because it is rather inexpensive product, this product was cheap and saved.
View detail
Fits: HONDA Universal, SUZUKI Universal
It's not only cheap. I do it properly.
It was uneasy with little review, but I was surprised by the solid result which was better than I imagined.
I installed it on C50 CUB but it feels better than OEM.
View detail
For Bw 's 125's for Repair
As Mirror got corrupted, as a result of searching for for Repair,
Quantity : Pair (for Left and Right) With this price.
cheap!
Surprisingly Mirror is expensive, is not it ~
If this price is OEM tick, COSPA is perfect!
View detail