Reviews
I put it on for the winter cold.
CROSSCUB110 for winter cold (JA60) I put it on the
The product is so good that I don't feel the wind while driving with the LargeGuard.
Minus points for some people.
It will be tough for those who do not have the proper tools to tighten the Bolt that attaches the Guard to the Bracket. (Manufacturers do not recommend that amateurs install them themselves in the first place.)
I have no problem with this, because I don't do it myself. I don't do it myself, and if someone yells at me, I just bail and return the yay, so no problem.
It is recommended for those who want to protect themselves from the cold as Total!
View detail
Luxury!
Grom (JC92) I installed it in
The area is large, and protection can be expected to be quite good.
The surface is painted, so it does not have the cheap look of the Plastic ground.
Installation is also easy, as it is simply attached at the same time as Mirror.
Design has also been MATCHed and looks pretty good.
View detail
The quality is outstanding.
You answered my questions about the product and I bought it right away.
Easily interchangeable with OEMs, fitting and using the Handlebar from Universal Product.
This is an essential product to find a position that works for you.
The quality is high and I am happy with it.
View detail
It's like an OEM
Kawasaki KSR 110 installed in Thailand MODEL 2013.
Since it was finished by Lime green with OEM paint color at Manufacturer, it became a feeling of fitting as if it was attached from the exterior as if it was an OEM.
Because I can not run expressways with two types of mopeds, the feeling of running on the general road clearly reduced the wind hitting the hand and the effect of Knuckle guard was recognized.
The installation itself was easy.
Clutch side (Clutch is not attached) In attaching, Bracket seemed to be in contact with the Chalk lever, so I moved Mirror Post about 1 mm to Right Side.
Also, as it is, the front extension with the Axel side is not aligned, so the shorter extension Plate is installed.
View detail
Mirror Adapter is required separately for CB 400 SB
Until now I was wearing Zeta 's Armor Handguard Bend and a dedicated Knuckle guard but I decided to remove them, so I bought this new Knuckle guard as a windshield.
Removing the Hand guard The reason for the biggest Large is Harness - Possibility of Damage to Wire etc..
Although it was a concern from the beginning of installation, since Clearance is quite severe and Harness passes through the outside of the Hand guard, if the Hand guard rotates with a fierce fall in case, there is a possibility of tearing Harness sort I thought.
If so, Lever is not damaged beyond damage, so I decided to remove the hand guard. I regret that I liked it.
Also, my reason is that my Sense has changed and resistance to these forms of Knuckle guard has gone away.
<How to install>
According to Title, CB 400 SB can not be installed with this product alone.
Instead of Bolt for tightening the Knuckle guard, separately M10 (Screw Diameter 10mm) The Mirror Adapter of Quantity : 2pc. Set is required.
I wanted to use OEM's blindfold Cap, so M10 → M10 Standard Thread Screw Adapter for height adjustment (1870 made by Takatsu) The was used.
In addition, commercially available M10 Rose Screw sold at Home center etc. is Pitch (Screw mountain interval) Although it fits, because the height of Screw mountain does not fit, it does not enter Mirror hole. be careful.
Mounting is easy, first with Mirror in the hole Material : Remove the plastic Blindfold Cap with Slotted screwdriver.
Place a Knuckle guard there, tighten the Mirror Adapter with a 14 mm Wrench, etc. and reinstall the blindfold Cap to complete it.
By the way, because this Knuckle guard is one point stopper, because it rotates and it is displaced during tightening, it is good to tighten while pressing with one hand.
CB 400 SB was able to be attached without using the attached extension plate.
When you fully lock the Handlebar, it makes slight contact with the Screen, but it does not matter as it bends a little bit.
Also you can hang Handlebar Lock before touching.
<Usability>
You can realize that it firmly protects the wind to the fingertip.
Of course it is helpless to the wind from the side so it is painful in midwinter alone, but if you combine with Grip heater you can run comfortably as before.
View detail
In this goods simple substance, the Long touring of a winter season is impossible. What will generate heat if the cold is not felt for a fingertip if it is only 15 to 20 minutes, but (Glove use for winter) it becomes more than it is needed. It will
In this goods simple substance, the Long touring of a winter season is impossible.
What will generate heat if the cold is not felt for a fingertip if it is only 15 to 20 minutes, but (Glove use for winter) it becomes more than
it is needed.
It will be the strongest if there are the
disposable body warmer, especially a Grip heater!
View detail
"The world walk general-purpose knuckle guard was attached to Gladius. Actual product is light smoke although it seems dark smoke in the printing photograph of a goods page. (Refer to photograph) Since a design is a see-through type, it does not spoil a f
"The world walk general-purpose knuckle guard was attached to Gladius. Actual product is light smoke although it seems dark smoke in the printing photograph of a goods page. (Refer to photograph) Since a design is a see-through type, it does not spoil a feeling of a sporty and is stylish. Moreover, a price is also cheap and excellent also in cost performance. Since it can be attached using the bolt of a mirror, attachment is easy. Required tools are a socket, a hezagonal wrench, and a glasses wrench. Neither of the tools is problematic with the cheap product of a one set type. An attached extension plate is used when attaching. On account of the length of an extension plate, although not attached symmetrically, I think that it is not a difference to the extent that it is worrisome. If an extension plate is inserted between two metal tubes which have come out of the master cylinder although a master cylinder interferes when attaching to the axel brake side, it can be equipped without difficulty. As for the protection-against-wind effect, form is ok comparatively. For who search for the protection-against-wind effect more, I recommend the form which wraps in lever positions, such as an acerbis. However, an acerbis is coloring, and since it is a design suitable for an off-road motorcycle, I recommend the knuckle guard of world walk for who want to think the design as a road motorcycle of Gladius as important. Cost performance, a design, etc. are good and it is a recommend." View detail