Reviews
Vibration made it shaky and unusable.
[How is it used?
I replaced it with Small Mirror because I wanted to make it Stylish.
Was the one you received as per Image?
The Mirror was smaller than the Image.
Was the installation difficult?
It was easy to do as I only had to replace it with NORMAL.
How was your experience with it?
Perhaps because of its slenderness, the vibration caused severe blurring, making the situation unbearable to watch.
Not practical.
[Included Parts:were they on?
There was nothing in particular
Yamaha cars must be fitted with Adapter.
[Was there anything that disappointed you?
It was too small to see and too dangerous because of the vibration.
Since ▼Scooter has this blurriness, I think this Level is enough to be known during testing at the time of product development. This is a Level that we would like to see the company make sure of.
View detail
Caution.
Used for HURRICANE Conti2 type. The inside diameter does not fit, so the convex part does not fit. Please be careful when installing on non-BEET handlebars. View detail
Fits: HONDA CB1300SF, HONDA CB1300SB, HONDA CB1100, HONDA CBR1000RR, HONDA VTR1000SP-1, HONDA VTR1000SP-2
Used for CBR1000RR SC57
It was easier.
It is a little expensive sometimes.
But it's easier, so it's effective.
If there was a Silver color, it would be the same color as the Brake lever, but unfortunately there is only Black.
I don't mind, though.
View detail
Small measures are blurred and difficult to see.
[How is it used?
Purchased to change to Classic style Mirror.
Was the one you received as per Image?
No, it was cheesier than I expected.
Was the installation difficult?
Since it is a replacement for NORMAL, it is easy with Bolt On!
How was your experience with it?
When running, vibration causes blurring, and Mirror is smaller than expected and difficult to see.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
Large is Small
Vibration makes it blurred and hard to see.
View detail
Fits: YAMAHA NIKEN, YAMAHA NIKENGT, YAMAHA MT-09SP, YAMAHA TRACER900 GT, YAMAHA FZ-10, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA XSR900
Mistake, or...
I think the quality of the finish is good and I can use it without any problem, but I bought it thinking that the lever is movable, but in fact, the advertisement seems to indicate that the lever can be moved from the joint, but in reality, it cannot be moved by hand and only works when a large force is applied when it falls over. I am worried that the lever will break if it does, but the Chinese one I bought before moves smoothly in the direction it moves when it falls over, so I feel deceived by its appearance. View detail
Used for Motorcycle
The diameter of the handlebar for Motorcycle is the same as for Motorcycle.
Only the for Left Side was installed on the bike.
The domino Grip is brilliant on My bicycle.
View detail
It is a must for Yamaha cars.
It is just a conversion Bolt but it scratches easily. monkey Wrench should not be used. It gets scratched easily. View detail
It needs a little processing.
It needs to be processed.
As long as I had the right tools and equipment, I was able to make it work.
Guard's frame is solid, so even if you hit it hard, it will guard you properly.
Let's hit them with the force of breaking a tree branch.
View detail
Maybe it just didn't fit.
In my case, the whole Handlebar felt like it was shaking, and I had to stop because it was so uncomfortable to the contrary.
The handlebar itself is also heavier, so the lightness of the Motorcycle is gone.
It is difficult because it depends on Motorcycle.
Installation should be no problem for those who can replace the Bar End.
View detail
Fits: その他 , HONDA APE100, HONDA APE50, HONDA CB400SF, HONDA HORNET250, KAWASAKI 250TR, KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI D-TRACKER, KAWASAKI ESTRELLA, KAWASAKI KLX250, KAWASAKI ZRX400, KAWASAKI ZRX400 II, SUZUKI BANDIT1200, SUZUKI GSX1400, SUZUKI GSX400IMPULS, SUZUKI SKY WAVE SS, YAMAHA SEROW225, YAMAHA SR400, YAMAHA XJR400
Mounted on w175tr
I had it on a cb400sb but the Image didn't fit me personally, so I ported it to a w175tr.
Installation is not a problem.
Self-satisfaction, I guess.
Also, the key is harder to turn.
View detail
So so
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
Moderately
It is structurally difficult to see due to vibration and other factors, although it is suitable for off-road driving purposes and applications.
It would be appreciated if you could adopt a Nut that prevents loosening as a vibration countermeasure. I am replacing it myself.
View detail
OEM Product for Peace of Mind
I am riding a DUCATI 900SS '97.
One day, I noticed that the stop-lamp did not come on even when I held the front brake, and upon investigation, I found that the micro switch had gone bad. Since it seemed that the switch had not changed since the car was new, I decided to replace it with a new one to avoid unnecessary risks such as a rear-end collision.
Since it is adopted by OEMs, reliability is not an issue.
As stated in the product description, it is for PS13 and PS16, so be careful not to make a mistake.
View detail
Fits: HONDA CROSS CUB50, HONDA GROM, HONDA CROSSCUB110, HONDA ZOOMER XThailandMODEL, HONDA ZOOMER X, HONDA ZOOMER FI, HONDA CT125, HONDA GB350, HONDA GB350S, KAWASAKI KSR110, HONDA Dunk, HONDA MONKEY FI, HONDA 12VMONKEY, HONDA Ape100, HONDA Ape50 FI, HONDA MONKEY125ThailandMODEL, HONDA Ape50
sp Mukawa Knuckle guard
The Guard section seems to be narrower than expected.
Not much wind protection.
I think the custom look is quite good.
View detail
Shorter than expected
I have a HURRICANE:V Blade Mirror TYPEII on my WR250X.
Rear visibility was fine, but the Mirror was almost directly above my Left hand, and it was hard to get a "Yaaaay! I bought it because the Mirror was almost directly above my left hand, and it was hard to do "Yaaaay!
There are 30 and 45, but I chose the 30, which was a little cheaper, without taking measurements, thinking there would be little difference.
When installed, it is shorter than expected.
I regretted a little that I had not measured properly, but it was a little easier to do so, so I guess that's OK. is a little easier to do now, so I guess it's OK.
Note that Cap is not included.
I have driven about 1000 km on commuting, mountain passes, and highways, and so far there has been no misalignment or rotation.
View detail
wobbly
It is wobbly when driving. I'm wondering if it's sturdy enough to run at high speed Large, I'll strengthen it using the method I saw on YouTube. View detail
Scratches easily
Purchased for Mirror replacement.
I had heard that it was prone to scratches, so I worked with caution, but the scratches were firmly in place.
It's a cheap product, so maybe it can't be helped, but I'd like it to be made a little sturdier.
View detail
Knuckle guard on top
Handlebar cover that can be installed over the knuckle guard
It is easier to be a little aggressive when installing.
DL1000 V-STROM250 and DL1000 V-STROM1050XT installed without problems
But the most important thing is that the handling in driving is the worst.
Button operation is almost impossible.
should be used sparingly
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX1300R, SUZUKI GSX-S750, SUZUKI GSR750, HONDA Super Cub 50, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA NM-4, HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA DUNK, HONDA CBR650F, HONDA CBR600RR, HONDA CBR400R, HONDA CBR250R, HONDA CBR1000RR
Vibration at normal rotation.
I have a CB1100RS, and I was concerned about the vibration of the Handlebar when driving on the highway, so I installed it thinking it would reduce the numbness in my hands. When I actually use it, it seems that the resonance point has only changed. (1500~2500rpm) In the vicinity of the car, the vibration seems to have increased conversely. Also, since it is quite heavy, the SelfStir is very strong and I feel that SteeringControl has become difficult when driving in the city. I have now returned to OEMWeight because my main route is city driving and Winding. Next I would like to try it on long distance touring at high speed. It is easy to change, so I may replace it depending on the Situation. View detail
Fits: HONDA CROSS CUB50, HONDA GROM, HONDA CROSSCUB110, HONDA ZOOMER XThailandMODEL, HONDA ZOOMER X, HONDA ZOOMER FI, HONDA CT125, HONDA GB350, HONDA GB350S, KAWASAKI KSR110, HONDA Dunk, HONDA MONKEY FI, HONDA 12VMONKEY, HONDA Ape100, HONDA Ape50 FI, HONDA MONKEY125ThailandMODEL, HONDA Ape50
sp Mukawa Knuckle guard
It is smaller than I expected. It doesn't have much wind protection. It is a dress-up part of the look. View detail