TRICK STAR Motorcycle Handles & Control Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

TRICK STAR

25 Dec 2023

Lever Guard Set for KAWASAKI

Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE

Japanese Webike user

5/5

Race ish look and feel

When switching to a 24-model ZX-6R, we decided to install Lever Guard to make it look like a race ish.

After much deliberation over which one to choose, we selected the Trickster one, which also comes with Clutch Side ends.

I thought it would be difficult to remove the screw lock because it was sticky, but it came off easily, and when I looked at it, there was no screw lock applied.

I don't know if this is the kind of Spec. in the 24 year MODEL or if it was a construction error (laughs).

As for the installation of the lever guard, I had prepared it because I read in a review that the throttle would be fixed if the spacer was not installed, but there was no problem with the throttle operation without using the spacer. However, there was no problem with the throttle operation without using Spacer.

Please note that there may be individual differences in this area.

Length adjustment is OEMLever, there is no interference at the shortest position.

Also Quantity:Pair (for Left and Right) to turn off Handlebar does not interfere with Cowl.

Since we are still in the break-in stage and are tied down to 4,000 rpm, we have not noticed much change in the vibration transmitted to the handlebar, but we will re-review if we notice anything after the break-in stage is over and we can rev it to higher rpm. View detail

TRICK STAR

19 Jun 2023

Lever Guard Set for KAWASAKI

Japanese Webike user

3/5

PinpointAttachment

It's a Lever Guard on the Brake Side. It's a good design and perfect for Accent.
I'm sure you'll be useful in Circuit driving, but the reality is that I'm not that dead heat.

The Clutch Side Bar End is also included in the package.:Pair (for Left and Right) It is good that Balance is taken without any difference in the
However, the Bar End does not have the same weight as the OEM and I was a little worried about vibration.
I was surprised that I did not feel any discomfort from the Large Chick when I took a short trip on the highway to the Yamasaka Road.
6R doesn't seem to have much vibration.
Sometimes people say they ride with their arms or their hands hurt, in which case they might be numb.

As a precaution, the positioning of the two ScrewGuard lengths should be decided in one shot. If you temporarily fix them a little stronger
Black paint has peeled off and left Screw marks. Most of the time, it should be the shortest and Large sturdy. (Tears)

Lastly, come to think of it, I didn't have TRICKSTAR's Sticker attached. I don't care because I don't put it on. Crying View detail

TRICK STAR

22 Apr 2023

Lever Guard Set for KAWASAKI

Japanese Webike user

5/5

Parenthesis good!

Since I don't play Race, I introduced it with Image priority ^_^.
The mood is uplifting. View detail

TRICK STAR

22 Apr 2023

Lever Guard Set for KAWASAKI

Japanese Webike user

5/5

Mounted on ZX25R

Purchased for Circuit Running and Dress-up
Installation takes less than 5 minutes, so even beginners can easily install it and it looks like a race ish, so it is a good first custom.
The price may seem a little high, but it is reasonable since the product is well made. This product is a type that covers the Brake Side and the Clutch Side is an end only product. View detail

TRICK STAR

11 Sep 2022

Center Cap M28

Fits: KAWASAKI ZX-10R, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-6R, YAMAHA YZF-R1, YAMAHA YZF-R6, SUZUKI GSX-R1000, KAWASAKI Ninja H2, KAWASAKI Ninja H2

Japanese Webike user

1/5

Is this what you think?

The product description says it is compatible with 17-pipe, but the O-ring that comes with it is too small.
The O-ring needs to be replaced or the groove where the O-ring fits needs to be raised.
It fits about 16 pies. The quality is not high, but it is cheap. View detail

Lever GuardQuantity:Set Kawasakifor Vehicle

TRICK STAR

28 Feb 2022

Lever GuardQuantity:Set Kawasakifor Vehicle

Fits: KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z900RS, KAWASAKI ZRX1200DAEG, KAWASAKI Ninja250, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI Z650RS, KAWASAKI , KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE

Japanese Webike user

5/5

Trickster Lever GuardQuantity:Set Kawasakifor Vehicle Green Light

I hope you don't use it for when you fall on the mountain pass.
It's a beautiful thing to look at.

Unity with Trickster View detail

TRICK STAR

21 Feb 2022

Lever Guard Set For KAWASAKI

Japanese Webike user

5/5

Looks cool to Race ish!

For coolness rather than effectiveness as Lever Guard.
I also purchased and installed the POM on both sides, hoping that it would be somewhat effective in the event of a fall.

Impressions of riding with it installed
The numbness in my hands due to the weight reduction I was worried about did not change much. View detail

TRICK STAR

14 Nov 2021

Stem Nut Set M25

Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-), KAWASAKI VERSYS-X 250, HUSQVARNA FE250, HUSQVARNA FE250-501 14-16, KAWASAKI Z250SL, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200

Japanese Webike user

5/5

Fits a 2020 NINJA2 Helmet 50R

2020 NINJA2 Helmet50R (EX250P) attached to the
If you have the tools, you only need to replace it, so the work is easy.
I'm happy with the quality and the look of the product. View detail

TRICK STAR

24 Oct 2021

Lever Guard Set For KAWASAKI

Japanese Webike user

5/5

No Circuit driving, but Parenthesis better!

What made you decide to buy?
I had a PREMIUM ZONEBar End installed, I don't do Circuit driving, but the Lever Guard is good for Parenthesis. "I want to wear Lever Guard someday.

How was your experience with it?
The TRICK STAR logo on the Guard is a nice touch, and the feeling of use was the first time I rode a car with the Lever Guard installed. It was the first time for me to ride a car with Lever Guard installed, but I could handle the accelerator operation and lever operation the same as the car without Lever Guard installed. Also, even if I cut the Handlebar as much as possible by pushing and pulling the car body, there was no interference with the body. (Of course...)

[Regarding installation] 21 years old:ZX-6R
When I installed the PREMIUM ZONE bar ends, I applied a little more threadlocker because I thought I would never have to remove them. The threadlocker works well and does not falter when loosening. I melted the threadlocker with a heat gun before the hex licked and was able to remove the PREMIUM ZONE bar end from both sides. I think the thread locker is also working on the stock one, so if you heat it up with a heat gun, it will be easier to loosen. (The heat gun gets very hot, so be careful not to melt the plastic.) The clutch side can be installed according to the instruction manual, but the accelerator side will stick if installed according to the instruction manual. If the accelerator side is installed according to the instruction manual, the accelerator will stick and it will be very dangerous because the accelerator will not return. If you install the accelerator side with the M8 washer as well as the PREMIUM ZONE bar end, you can use the accelerator as usual. The lever guard that we purchased is a general purpose lever guard for Kawasaki. If you are not using the ZX-6R, you may want to temporarily assemble it and check it. By the way, the anodized aluminum of the guard is a little weak, so when you adjust the position, if you tighten the mounting bolt too hard, the anodized aluminum will come off. View detail

TRICK STAR

05 May 2021

Lever GuardQuantity:Set Kawasakifor Vehicle

Japanese Webike user

4/5

Easy Lacy Style

It's a little high...
But it's cool. (^.^) /~~~OK View detail

TRICK STAR

25 Feb 2021

Stem Nut Set M25

Fits: KAWASAKI VERSYS-X 250, KAWASAKI Versys300, KAWASAKI Z250SL, KAWASAKI ZX-9R, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-)

Uni

5/5

decorations

My car is KAWASAKI’s NINJA 400, model year 2019. When I was visiting webike, I stumbled upon this TRICK STAR triangle center nut set. I thought it looked pretty and bought it because the car is also green, haha. It should be noted that the six sleeves must be used for installation, otherwise the paint around the screws will be easily scratched due to the insufficient size. ---------------------------------------------- My car is 400 , the 2019 models of KAWASAKI NINJA. When visiting webike I stumbled across this TRICK STAR triangle center of the table nut group, feel very good looking to buy, because the car is green, ha ha. It should be noted that the installation must use good six sleeve, or because of the size easily accurate enough to screw around paint scraped off. Powered by Google Translator View detail

TRICK STAR

23 May 2020

Lever Guard Set For KAWASAKI

Japan User(translated)

5/5

Good design and good functionality

The design is good and I love it, no problems in terms of use
Hit the ZX-10R with the quintessential Manufacturer's product used View detail

TRICK STAR

09 May 2020

Lever Guard Set For KAWASAKI

Japan User(translated)

3/5

Does that help?

The Lever Guard was intended to be installed from the start when I bought the ninja
Lever Guard is available from various manufacturers, but the I decided on this one in black

Installation is easy
Just remove the Bar End from the original and put it on

But you may not be able to tell from the picture "Dents It was attached from the beginning It's a scratchy thing even before I put it on
In addition, he says the attached Bolt head Large size is different "Chinese Manufacturer? The state of packaging that makes you think that you're a good person

This time I bought the Bolt at Homsen and got a Large Kisa

Do you think it's a Lever Guard"degree"product or something?
So, next time you buy a product from Trickster and "Dents Ya Wrong size If you have trouble with such Trouble then … View detail