Reviews
OK
Quantity:I didn't have high expectations because of the price for 2pcs, but the Mirror's image quality is much better than the very cheap Mirror made in China. [Color] Clear
The Mirror part is blurred on the cheap ones, but this one looks as good as the expensive ones like Magical racing, even though it is cheap. The screws are also available in all sizes, including Opposite Thread Screws, so there is a wide range of motorcycle models to be installed. The screws are sturdy and well packaged in a neat box. Even if it breaks down, I will buy it again because it's inexpensive.
View detail
Stage 6 Mirror
Fast delivery within a week. Quality and appearance looks great. Easy installation. The only downside are is a zoom-in lens. With quite small lens. Zoom-in lens can be quite hard to look at. Hope you will consider the change to normal lens View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA FORCE155, YAMAHA SMAX, YAMAHA MAJESTYS, YAMAHA NMAX125, SUZUKI ADDRESSV125, SUZUKI ADDRESS V100
Unfortunately, it didn't fit.
I purchased this product as a BirdCity155 compatible product, but it was necessary to modify the product in order to install the Left Side.
Unfortunately, we had to deal with a return, but the response was excellent.
View detail
Review
Fast shipping to singapore. Came with bolts and nuts to fit different fittings. Anti-Glare. Only downside is that the image is zoomed in. Would be nice if it's not so judgement could be better. Overall nice product! View detail
8mm Quantity:Pair (for Left and Right) Normal Thread Screw is good.
[How is it used?
YamahaCHAPPY (CHAPPY) I chose this product for a new Mirror because the Mirror for my old one was not turning due to rust and eventually broke.
The round shape for Yamaha was difficult to find a good one, so it was machined and installed.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
Quantity:Pair (for Left and Right) Since it is an 8mm Normal Thread Screw, it cannot be attached to CHAPPY as it is.
On the Right Side, the hole was extended with a 6.8mm Drill and the M8 tap stood up, and on the Left Side, the M8 tap was cut by removing the Inserted Resin Parts.
Handlebar Switch is Material:It is aluminum, so it is 6.8mm, but there is no particular difficulty in hand drilling.
How was your experience with it?
Visibility is good.
I thought it was a little long for what it looked like. I thought it was a little long, but it turned out to be as I expected.
[Included Parts:were they on?
MirrorBody only.
Nut is originally attached to the Body, so there is no need for it.
[Was there anything that disappointed you?
Not particularly
【Review】
I am satisfied with the round Mirror Style as I expected at this price.
8mm Quantity:Pair (for Left and Right) The Normal Thread Screw was easy to modify and install.
View detail
Fits: SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
NCY V125 High Solo AXISCell start position is △.
Made in NCYHigh throttle for ADDRESS V125!
Since it is for a V125, it is in the form of an OEMAccelerator Wire Bracket, so it is inserted and fixed with a quick turn.
【attachment】 It is quite tedious. Slowly trying it over and over again.
The wire length is adjusted to the longest by adjusting the screws and positioning the High Solo Thailand Ko.
The stopper bolt can be made tautest and shortest by placing a washer in the front screw hole and letting the bolt protrude to the limit. From there, adjust the bolt again with the Adjust Screw to make the bolt taut to the extent that there is just a little bit of play in the bolt.:Set。
[The key to tautness].
Iron when it is cold when stretched to Limit (Stainless Steel) The wire becomes shorter and slightly pulled, and the Idling remains high. Therefore, the tension changes between winter and summer, and also changes while riding, so adjustments are made in anticipation of this.
[Made]
The Thailand core and Throttle cone are one piece, so you can rest assured.
The cheaper CHINA models have a screw-type joint between the thailander and the throttle cone, so it is possible that the joint may come loose.
[The only drawback].
When mounted horizontally, the Axel onStart position is quite low, so full opening requires a lot of wrist twisting down to the bottom.
*This is tilted more forward than in the photo.
It would be easier to operate if the Axel opening was a little less and it could be opened more fully, but … still, it is much higher solo than the OEM or the OEM Throttle holder type which is 30% higher solo and is very easy to control and ride, It is very easy to control and safe because it moves as you feel and is stress-free.
Axel keeps the Grip in a fixed position and there is almost no need to re-grip it!
View detail
Fits: YAMAHA MAJESTY125
It was a pontoon.
The LeftRight Handlebar Switch was probably left as it was when the previous owner bought the car new, but the Left Side contact problem was fixed with a full reverse overhaul, but the Right Side contact wear on the Headlight switch was difficult to fix even with a full reverse overhaul, so I decided to replace it with this cheap compatible switch. I replaced it with a cheap compatible switch here.
The texture, operability, Cable length, etc. are all the same as OEM, so all I had to do was remove the Handlebar Cover, remove the Coupler, and the Switch replacement was complete.
At this price, a quick replacement is the right choice.
View detail
Parenthesis good!
Parenthesis is good. I replaced Mirror of Takekawa, but it is hard to see as I expected. [Color] It is not clear, so it may be difficult to distinguish fat cars and White Motorcycles… You have to be careful about tracking.
The Mirror and Bracket are operated by the ball, but it has a screw so that it can be re-tightened if it gets loose.
View detail
stage 6 mirrors
item received as described and well packed. received on time as well. will order more in the future stage6 mirrors are one of the most soughts mirror for small CC scooters such as namx xmax aerox... View detail
Cheap and affordable_OEM alternative
Something cheaper than OEM." I was looking for a Motorcycle supply store with the motto of
Although there are variants for Custom Ordinary." is not surprising.
I'm glad I found it on webike!
This is a great price for the front and rear parts and Screws included.
View detail
Very nice
Very nice mirrors looks like F1. Very nicely packed and safe packaging to prevent damage. Delivery was smooth too. Thank you! View detail
Excellent
Thank you seller for the mirror. Very nicely packed and safe packaging to prevent damage. Delivery was smooth too. Once again thank you. View detail
Commonly usable
As expected from KN Kikaku, the assembly was not too difficult. It was not too difficult to assemble. View detail
Axel goes Smooth.
I purchased this Accelerator Wire because the OEM Accelerator Wire was reluctant to move.
The replacement took about half a day of work, partly because I was not used to it.
Adjust and install the Carburetor side and the Pump side.
Axel, which had become reluctant, is now lighter.
View detail
กระจกสองนิ้ว kn งานดีใช้งานได้จริง View detail
ใช้งานจริงโอเคครับเห็นชัดเจน View detail
Visual type?
Lack of texture, within expectations; omission of weight inside Mirror, within expectations. The accompanying vibration during driving was within expectations. I thought the lack of focus was due to my old eyes, but it does not seem to be so. I can see my shoulder reflected in the mirror, but it is impossible to see behind me. To read the number of the car behind you, you need to move your face closer to the Mirror. It is not for practical use. It is for taking pictures when you sell motorcycles. View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X
Hazardization
Installation is easy, and the HeadCowl can be removed with a single screwdriver. The special harness is attached, so all I had to do was pull it out and replace it. View detail
To repair.
I just couldn't find it, Quantity?:Pair (for Left and Right) I had to find and ask for Right and Left separately because I didn't have a View detail
Replaced by repair
It is cheaper than OEM Parts and not much different from OEM Product, no complaints. View detail