Reviews
Design that sticks with the Showa generation.
[How is it used?
I was wondering about the hand guard when I restored my SEROW225WE for mountain play and decided to install it on an old vehicle. RALLY50Bush in ACERBIS." Image, but it's a little pricey...
I found this product while wandering through Webike's product introduction section.
This product is also moderately priced, but I used my hanghang points to buy it because it was about 5,000 yen cheaper than the real thing.
Was the one you received as per Image?
I think the design of the RALLY50Bush is just like the RALLY50Bush that was installed on a high percentage of the Dual PurPass cars that I saw when I was young and in the Showa era, and I think it suits the 1998 SEROW225WE very well.
This is it!" The product was just like the Image.
Was the installation difficult?
If the Bar End of the Handlebar is Close Type, the Grip and Axel Holder must be modified or replaced with an Open End Type Grip and Axel Holder. If the Bar End of the Handlebar is open, it is not so difficult to adjust the position of the Bar End while assembling temporarily.
If you are new to the site, you can use the video Site, etc. Hand guard installation Please search on "etc." to see what the work is, and if it looks too tough for you to watch the video. A friend. Or PRO's Shop." The following is a brief overview of the process of making a request to the
How was your experience with it?
Material:The outer perimeter is covered with Aluminum Guard, which provides peace of mind in the event of a fall.
I am ashamed to say that I have fallen down several times after installation, but there is no deformation on the hand guard & handlebar (the outer circumference of the hand guard is covered with scratches, but...).
[Included Parts:were they on?
Includes Clamp for GuardBody and Handlebar Mounting, and each Bolt, except Grip and Axel Holder Parts to install the Hand guard with this product alone." Is Quantity:Set
[Was there anything that disappointed you?
The design and functionality of the product is as expected. Disappointment." I don't think there are any. (If you don't like the design, you probably won't choose this product in the first place...)
0Other items that may be useful include
Point and hang of installation
When installing on an OEM iron Handlebar, the inner diameter is wide, so insert the supplied Black Vinyl tube into the fixed Bolt around the perimeter.
In winter, this Vinyl is hard, so it may be easier to work with it after warming it up with Dryeretc.
Since the difficulty of installation varies slightly depending on the shape of the handlebar, as mentioned above, please adjust it by checking how it looks in a temporary assembly.
[Availability and clarity of the Instruction Manual
No Instruction Manual, Hand guard Quantities:Pair (for Left and Right) Please check the ManufacturerSite, each video, and Webike's impression images to make sure that you do not make a mistake before installation.
[Notes]
For first-time users, please be sure to temporarily assemble the Axel side in advance and install it so as not to squeeze the Axel Holder (to avoid the Axel fixed condition caused by over-tightening).
[ITEMS TO BUY TOGETHER
Penetrating type Grip & Axel Holder if you can afford it, We don't have room in our budget." Or I like the grip of the OEMGrip." If you have a "Grip end", please hollow out the Grip end on both sides as hard as you can to make it Beauty.
[Opinions and requests to Manufacturer
This is an unavoidable part of the product since it is made overseas, but a lower price would be appreciated for replacement in case of damage.
View detail
Cannot be folded
It is fixed with Screw lock and cannot be folded.
No OEM compatible quality.
View detail
1' ハンドルバー用のスロットル アセンブリです。7/8 ハンドルバーとは互換性がありません。使用感に関しては、まだ試していません。ただし、ハンドルを助けるためにグリスを使用する必要があると考えてください。配送は梱包状態よりも速くなります。 View detail
It is made close to OEM.
Mirror SizeDesign is the same as OEM.
It looks good.
The difference is that there is no Opposite Thread Screw in the mounting area.
We need to be divided in this area.
Also, Boots is a little on the Large side.
The price is about 2,000 yen less than OEM's, which is good for CP.
View detail
THROTTLE VERY COOL
I ordered it to install Kawasaki W175SE, and waiting 3 week for recived it. It very cool product as my expected, material is cast aluminum as describe and chrome plating is good. View detail
Something like GTMirror.
I wanted to put on Black GTMirror.
The price was cheap, so I gave it a try.
Bracket is Aluminum
Is the Body Plastic?
Mirror is about 6x12
Angle Adjustment Bracket Screws rust in an instant (Lol)
The bracket is almost horizontal, so it can be mounted low.
View detail
![MIRROR L/R [0640-1039].](https://img.webike-cdn.net/catalogue/images/81251/5AE6EB11-B08E-457C-B94C-B97D25AA2595_TS.jpg)
Fits: YAMAHA DT 100, YAMAHA DT 125, YAMAHA DT 250, YAMAHA DT 360, YAMAHA DT 400, YAMAHA RD 125, YAMAHA RD 200, YAMAHA RD 250, YAMAHA RD 350, YAMAHA RD 400, YAMAHA RS 100, YAMAHA TX 750, YAMAHA XT 500
YamahaCLASSIC
I bought this for SR's Custom (SCRAMBLERSpec.).
It is satisfying for those who know the MODEL of yesteryear with DT and RD's Ripro in the 70s.
In a way, this cheapness is a nice touch.
However, it is not like the cheap ones made in Asia.
I was satisfied with my purchase of the simple Chrome round Mirror with texture and Large.
View detail
OEM Shape is good, but...
I bought this product because the OEM Mirror (Left) has finally been discontinued. This Design was good imitation of OEM, but the quality of Mirror is too bad. It's not like the old CHINA. Anyway, it was cheap like old CHINA. View detail
EMGO MIRROR
Not a bad mirror from EMGO. It is the same as the original. But the bad news is that there is no rubber lining included with the mirror. There is also a slight backlash in the mirror mount in different directions. As for replacing your damaged original mirror, it will do fine. View detail
It didn't stick.
Compliance table gsx-r 750 year:96-99 I bought it for the same car model of 1999, believing in the indication that it was the same. It took more than 2 months from order to arrival. When I tried to install it, the bolt of Mirror was too short and I couldn't install it.
I bought this product because I believed the fitment chart, but I felt it was too bad.
View detail