Reviews
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
Quality is fine, but be careful when using Handlebar Guard together.
The OEM brake lever seemed a little far away, so I decided to replace it with a brake lever with a grip distance adjuster.
The installation is not so difficult, and even an amateur can do it if he has Universal tools, so I did it myself at my own risk. However, there is no need to do anything to the brake fluid line; all you need to do is remove the bolt from the bracket where the lever is attached and replace the part. It was a bit tedious to remove the bolt. I had to loosen some parts around it.
After installation, I was able to use it comfortably.Adjust adjustment of Lever was also easy, and it was in a quite nice position.Quantity:Now that I can set the brake lever, it is easier to operate the brake at a moment's notice, so I don't have to keep my finger on the brake lever all the time, even on narrow small roads.
However, the tip of the lever interfered with ZETA's AdventureArmor Handguard, which was installed later, and hit it, making it impossible to grip the lever, so I removed it in tears. A little more. (5mm more) I had the option of cutting off the end of the Lever, since it was shorter and could be compatible without interference, but it was kind of a waste...
I'll sell it at GarageSale on Web!ke. (Lol)
The product itself is fine, Material:Aluminum and lightweight, I am satisfied with the quality.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Parenthesis OK
The 3D processing of Lever is very beautiful.
Tension goes up whether you are driving or looking at it.
Levers easily fall over, but I think I prefer them to be a little tighter.
Well, it is safe to say that in the event of a fall, it will fall right back down.
View detail
Fits: KAWASAKI VERSYS 650, KAWASAKI VULCAN S 650, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI VERSYS 1000, KAWASAKI VERSYS 1000, KAWASAKI VULCAN 650
It was the right decision to buy it.
It is easier to grip than OEM ones and I like the color.
However, I think it might be a little short.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It is slim and easy to use.
I used a UK made one on my first 25R, but the SNIPER one I had installed on my 6R was slimmer and easier to grip, so I bought one for my 25R as well.
The fact that it is Foldable was also a Point of Purchase.
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
It is easy to install.
I think the play of the attachment part is a little too large, but the feel is good. View detail
Fits: HONDA CBR250RRR
Easy Exchange
It was easy to replace the clutch, but I felt some wobble when operating the clutch and breaking the foldable for the first time, and I wondered if this was just a normal thing.
Easy to grip, lever position adjustable, and cutting is great!
View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
I am satisfied with the position adjustment.
I replaced it because I had small hands and felt that Lever was too far away.
I don't like Short lever, so I looked for a long lever.
We decided to go with this Lever.
There is some Wobble, but it is within expectations for this type of Lever.
View detail
Infinitely adjustable for greater flexibility
[How is it used?
WindingMain's Touring~Circuit driving event
Was the installation difficult?
It's not too difficult, but it's around Handlebar, so basic tools are required.
It is necessary to process the hole drilling for Switch box.
How was your experience with it?
Unlike other manufacturers, the opening angle and aperture angle can be adjusted steplessly, so you can pay attention to the fine position adjustment.
The Handlebar itself is stiff and seems to be of high quality.
[Position]
I use it farther and lower than OEM, slightly more open and with a stronger aperture.
It is easy to handle the upper body when cornering, and it is fun to strengthen the sense of human-horse unity. This position is not suitable for street riding or casual touring.
[Notes]
In the case of the Ninja 400, there is a bracket under the top bridge that holds the brake hose and other cables. On the Ninja 400, there is a bracket under the top bridge that holds the brake hose and other cables.
In order to prevent interference with the cowl, a handlebar stopper has been added to limit the cutting angle.
If you don't want to do this adjustment or it's too much trouble for you, you can choose the Type which can be ponched by other manufacturers.
View detail
Fits: KAWASAKI D-TRACKER X, KAWASAKI D Tracker 125, KAWASAKI D-TRACKER 125, KAWASAKI Z250SL, KAWASAKI Ninja250SL, KAWASAKI KLX250, KAWASAKI KLX125, KAWASAKI D Tracker X, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI Z125 PRO, KAWASAKI Z125 PRO
I need a short lever.
Easy to use with a wide range of grip adjustment
I just wanted a short lever.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
it's beautiful
this stem nut cap replaced the plastic one. it is easy to install and it is beautiful. the only concern is there is a small gap between the cap and the nut. View detail
Fits: HONDA CT110 HUNTER CUB CT125, HONDA CT110 HUNTER CUB CT125, HONDA Dax125, HONDA ST125, HONDA SUPER CUB110
Total coordinate
I bought this product because I wanted to unify the anodized parts of this motorcycle with Red. 6-step adjustable Foldable, I chose this product because of the color Red, Foldable, and the price, although Lever is also available from other manufacturers. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Lever
We replaced it with a movable type in case of a fall.
The installation was fine and I don't mind the rattle etc.
I think it is better than OEMParts.
However, if you don't set the Clutch Side at 4 or more because of StartAssist, the RPM will keep going up when you put it in 1st gear, so be careful if you have small hands.
View detail
Fits: HONDA CB400SS, HONDA CB750, HONDA CBR400RR, HONDA CL400, HONDA HORNET250, HONDA JADE250, HONDA MAGNA250, HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X, HONDA NSR250R, HONDA RVF400, HONDA VFR400, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB HYPER VTEC Revo, HONDA CB400SB Revo, HONDA CB400SF, HONDA CB400SF
Expensive but safe
I'm short and a beginner, so I can't support myself when I'm wobbly.
Brake and Clutch were both there at one time.
Do you carry a spare? I thought about that, but...
If it's a long touring, but if it's a short trip, I don't carry it with me.
If you think about that, well, it's cheap, right? I felt that it was.
There is also an adjustment lever, so even I have small hands.
You can grip it in a good position. Very easy to install.
I've been using OEM until now, but it's nice to have the customization feeling. I am satisfied!
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Cost performance is good enough
For the price, I think this is good enough quality.
I didn't notice any of the rattles that others have noted for me.
Since I prefer a distant position, Dial is set to 5, or is it because of Switch interference? I don't think so.
The Clutch is also light, so the Short lever is long enough.
However, it was a little difficult to install.
The Switch is in the way and the Socket won't fit, so I have to remove the Wire, loosen the Clamp bolt and set the Holder to Up to Access the Lever fixed Bolt Nut.
I tried to remove the Switch, but it was too hard and the Screw was going to get stupid, so this method is no good.
I ended up turning it many times with Spanner to remove the Nut.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Quantity:Pair (for Left and Right) For this price for the set, it makes sense.
Another company's product is more expensive on one side than this one, so that one might be more accurate...
For me, a little rattling is acceptable, but if you are concerned about it, you might want to choose Made in Japan.
The installation went on without any problems, but Lever itself is a little rickety. "Mounting, precision The product itself is 3 stars, but the cosmetic quality of the product itself is not as good as Quantity:Pair (for Left and Right) For the price of this set, I think it's expensive!
I bought the SNIPER Lever and Rear Sets and haven't installed the footpegs yet, but they both look great!
I'll be installing the Rear Sets soon, so I'll be doing an in-play.
View detail