Reviews
Large change in installation work
If you remove the handlebar cover of the scooter, a hole will be made there, and you just want to hide it.
I happened to have another job to replace the handlebar, so I worked on it in conjunction with that. In addition, there is nothing to hold the parts in place, so you have to use gold glue to fix the handles in place.
If you are not confident if you want to replace it, I suggest you ask Shop to do so.
View detail
It's neither good nor bad
hrc grom (JC92) The Handlebar Stopper must be installed. (If not, the Switch box will interfere with the TankShroud.)
It is about 4 cm lower than the OEM Handlebar and is suitable for Sports driving.
One drawback is that it bends easily for Steel. Even a fall and a light hit often results in bending, and I have used three of the same product in one year.
View detail
Fits: HONDA NC750X, HONDA NC750X, SUZUKI GSR400, SUZUKI GSX1400, SUZUKI ST250, SUZUKI ST250 E type, SUZUKI volty, YAMAHA XJR1300, YAMAHA MT03, HONDA CB500X, YAMAHA BRONCO, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW225, YAMAHA XJR1200, YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW200
I thought it would make driving easier, but it had the opposite effect.
I thought that if I could raise my body more, it would make driving easier. However, the change in posture made it impossible to determine the position of my hips, and even after reviewing the footpegetc., it did not improve, so I ended up removing it. But of course, this is a problem of my physique, so it does not apply to everyone. For reference, I am 180 cm, 77 kg, and have an inseam of about 85 cm.
At the time of installation, the bolt that came with the product was slightly too long and could not be tightened all the way in. After shaving a fewmm off the tip with a sander and adjusting the screw threads with a dice, I was able to install the bolt on the Beauty.
My vehicle around here. (This is the Final edition of CB1100EX) I don't know if it is a problem with the "Quality" or the model of the car, but since some machining is required, I have set the quality and work skill items a little stricter. I think the machining accuracy of the product itself is good, and even a beginner can easily install it if the screw threads are not adjusted.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The effect was subtle for me.
"Separate handle for GSX1300R HAYABUSA." I told myself that I was going to be able to ride, but the position was just too tight...
I found a Spacer on sale, so I bought it to try it out.
I ended up with the Pipe Handlebar Kit.
It is relatively easy to install, but I didn't feel the effect on me. It's hard to say no, because everyone feels differently.
View detail
It'll be easier.
Put it on for a test. It certainly gives you more room in your upper body. However, if I keep the OEMSeat of the Z800, the load on my lower back and hips will increase. Once again, I think OEMPosition is well thought out. I took it off in one day. View detail
Even though it's used in Intro pics!
I bought it for KATANA installation because it was used for KATANA as an installation example in the Intro photo, but the Weight (Quantity) of Inner part was not enough.:(1pc. eye pic) didn't make it into the bar!
First of all, I used OEM Bar End rubber parts and other parts, but the result was lighter than OEM.
It's a shame, because I liked the look of it, simple and unobtrusive Logo and all!
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CB300R, HONDA CB150R
You're late, aren't you?
I don't want to be a bottom-feeder Kramer, so I won't say it strongly, but isn't it too late to deliver?
The delivery date is scheduled to be one week after the order is placed, and on the scheduled delivery date, I received an email saying that the delivery would be delayed, and then three days later, I still haven't heard anything;
If that's the case, I'll start from the beginning. "Unable to order due to lack of stock. I wish I could.
View detail
Fits: YAMAHA NMAX155, YAMAHA NMAX125, YAMAHA NMAX125
Squeeze Han?
The texture and appearance are better than OEM, but the Handlebar is narrower than I imagined, so it might be tiring in Touring etc. It was good if there was a little more room. After that, I replaced it with another Handlebar after a while. View detail
I did it out of admiration alone.
I bought it because I wanted to make CB1100RS a Separate handle.
There is no hole in the handlebar for the exclusive use of the car model and the rigidity of the product is very solid, so the teeth of the drill are broken.
I managed to drill a hole in it and installed it, but it didn't have as much throttle as I expected and it opened up horizontally.
Separate handle, the spiciness of the stance that is Demerit.
I couldn't stand this and went back to the OEM.
I think it was a mistake to install it just out of admiration.
View detail
Fits: SUZUKI GSX250FX, KAWASAKI BALIUS2, KAWASAKI BALIUS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750 RS
A bit expensive …
When I replaced the Handlebar on the ZEPHYR400, I also replaced the Holder at the same time.
It's pretty normal and there doesn't seem to be anything good or bad about it.
It's not a component that changes anything in terms of performance, so it's more expensive …
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200E, YAMAHA TW200, Others , SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER Big Boy, SUZUKI GRASS TRACKER, SUZUKI GRASS TRACKER, SUZUKI RV200 VANVAN, KAWASAKI W400, KAWASAKI 250TR, HONDA NC700X, HONDA FTR223, HONDA FTR223, HONDA CB400SS, HONDA CB1300SUPER BOLDOR, HONDA CB1100
Since it was a form exactly good for a VINTAGE Motocross, it purchased.Since there is no skid of a Handle-clamp part and it shifts into a Race, use in a Race is severe.It is an object for Street motorcycles.
Since it was a form exactly good for a VINTAGE Motocross, it purchased.Since there is no skid of a Handle-clamp part and it shifts into a Race, use in a Race is severe.It is an object for Street motorcycles. View detail
Although the Silver was purchased, it is dim and texture is not quite satisfactory. Although it seldom changes to a pure state, since it is a low end product, is it such a thing?
Although the Silver was purchased, it is dim and texture is not quite satisfactory.
Although it seldom changes to a pure state, since it is a low end product, is it such a thing?
View detail
Fits: SUZUKI GSF750, HONDA CB400SF vtec Revo, HONDA CB400SF vtec III, HONDA CB400SF vtec II, HONDA CB400SF vtec I, HONDA HORNET600, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX400 II, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR750, SUZUKI INAZUMA400, SUZUKI GSX400, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJR400, YAMAHA XSR700, HONDA HORNET250, HONDA VTR250 LD, HONDA VTR250, HONDA CB400SF verS
[Webike Monitor] Troubles were suffered in order to attach so that it may not interfere in the Meter and a Tank. It is not an overstatement although there is no degree of freedom. It becomes an inclined attitude very much and the waist is painf
[Webike Monitor] Troubles were suffered in order to attach so that it may not interfere in the
Meter and a Tank.
It is not an overstatement although there is no degree of freedom.
It becomes an inclined attitude very much and the waist is painful.
However, since he is smart, he buys it and I think that it was good.
View detail
It was attachment to PCX. Attachment time was about 30 minutes. As the impression, a handle came by to the front and it may be the problem of my height, there is a narrow feeling conversely and it became harder in position than normal, Cobb of the seat wa
It was attachment to PCX. Attachment time was about 30 minutes. As the impression, a handle came by to the front and it may be the problem of my height, there is a narrow feeling conversely and it became harder in position than normal, Cobb of the seat was equivalent to the hips and prolonged operation became severe, and when changing the seat into the custom seat after all, it became easy in position. Though handle width is also narrower than normal, passing through etc. became easy. View detail
Since its [Webike-monitor] own car was exchanged for the bar called HERIBA instead of a hurricane up handle, it attached this product. Also by the pure cable, although it is OK, it has interfered in the gear indicator with which it equipped under the
Since its [Webike-monitor] own car was exchanged for the bar called HERIBA instead of a hurricane up handle, it attached this product.
Also by the pure cable, although it is OK, it has interfered in the gear indicator with which it equipped under the meter for a while.
It tries to be covered with a little HERIBA attached cable in a meter past [ merit ], it is hot, and is just right touch with this product.
However, although I have not understood since the problem of inventory time, or the start, it has run out of the oil of a cable, and a grip is heavy and ZARATSUKI was felt.
We recommend you lubrication before wearing.
It is two-stars !! under those circumstances ....
View detail
Fits: KAWASAKI NINJA2 Helmet50RR, KAWASAKI NINJA250R
He wanted to relieve a riding posture and it was purchased. When equipped, surely some became easy, but it was not like [ expected ]. If a sports run is not carried out, the way obediently made into the bar handle may say.
He wanted to relieve a riding posture and it was purchased.
When equipped, surely some became easy, but it was not like [ expected ].
If a sports run is not carried out, the way obediently made into the bar handle may say.
View detail
Appearance is very Good. He has a feeling from which the circumference of a handle became a race ish. However, although IG key cylinder had to be taken from the pure top bridge on the occasion of attachment, the screw which is fixing both sides wa
Appearance is very Good.
He has a feeling from which the circumference of a handle became a race ish.
However, although IG key cylinder had to be taken from the pure top bridge on the occasion of attachment, the screw which is fixing both sides was not able to remove by an ordinary tool with the special screw for crime prevention.
By its last resort, it cuts off with an electric grinder ...
When there was better (smile) equipment which appeared in the very dangerous plan to say, there was no such thing, but it took time a little to attach, after purchasing.
saying more, if it seems that the hit is made immediately -- it is -- the * goods themselves are satisfactory.
If there are also things other than silver, in addition, it will be Good!
View detail